-
Logitech software causing audio issues with maschine & audio in general
im putting this up as a warning to users, who might be considering using software from Logitech. Logitech of course deals with mouse&keyboard configurations and that kind of thing, i had just recently installed logitech options and noticed glitching & distortion coming through the audio outputs after about 5minutes to 10…
-
MY Mikro is not recognized?
I'm trying to setup a mikro maschine, but even after installing maschine 3 the software can't recognize my hardware, any recommendations ?
-
Can I reclaim my old MPRJ files?
Hello all, Back in 2011 I bought a Maschine Mikro M1 and had loads of fun with it. I've since lost both the original hardware and software, however I have all the project files (.mprj) and samples saved. I would love nothing more than to be able to listen to my old beats again. Is it as simple as importing them into the…
-
Maschine Plus internal midi routing
Hi, after few hours of search for a solution I am trying here. I am trying to send midi from group A to group B and C. on each of them a different instrument. I tried many combinations of midi settings. basically, enabling midi (not the USB in the settings for receiving and sending. on group A setup on midi output to chml…
-
Maschine 3.0 software loading issues loading NI Kontakt Instruments
For some reason Maschine is displaying an error "Your version of Kontakt is too old to load this file" and defaulting to Kontakt6 even on relatively newer soundsets such as 40s Very Own Drums. The sound then loads with K6. Then if I switch the plugin to Kontakt 8 it is fine. Anyone else having similar issues. Some other…
-
Valid Factory outlet?
Hi Maschiner's I've come across a listing in 'Reverb' for a Maschine MK3 at a good price for a Used B-Stock unit. The location is listed as Native Instruments US Direct Fremont, CA, United States https://reverb.com/shop/nativeinstrumentsus/about but I can find no information anywhere as to the location locally, nor on the…
-
Full screen is not working on Maschine 3 SW!
Well, the problem is pretty much straight fwd…CTRL+F is not working anymore to get the sw to full screen… Any help? conf: Win 11
-
Akai get an NKS upgrade
https://www.instagram.com/reel/DFIWCllP7Wd/?igsh=NjNpYjB6NHl6dm9t Anyone seen the new upgrade for Akai MPCs? I wonder what this means for Maschine
-
Maschine 3 freezes on startup plugin scan
Takes up to 10 minutes to scan Arturia "Wurly V3" and then freezes scanning "WavesShell1 VST 14.25". Task manager shows many "ni-plugin-info.exe" getting started simulaniously, last counted 10 instances. OS Windows 11. Pressing ESC, as stated in other post, does not work. Ableton, Cubase, Reaper and Reason do not hang…
-
Maschine Mk3 Maschine 3.0
I am running Maschine 3.0 as a vst inside cubase. Even though: Maschine Track is not selected, Record is not armed , and monitor not enabled If I hit the Maschine pads they still sound out. Any thought how to configure it so that it does not do that? - Thanks
-
Noob question: can I deep sample objects and use them as instruments in Maschine?
I'd love to finally sample a lot of household objects I have and ebenfit from the amazing sensitivity of Maschine's pads. Obvs I want to deep sample them with lots of velocities is it possible to use Maschine' sampler? (assign multiple velocities etc..) and create individual instruments for later use? afaik Maschine…
-
About Retro Machines mk2
Hi does anybody knows if I can use Retro Machine mk2 plug in with my Maschine controller without any issue? Please let me know Fred
-
Maschine Plus sound crackling without cpu spike or bad audios
Hi, i using maschine plus in standalone mode (without computer) for playing live. my workflow for playing live is this: some groups runs as loops (pre-produced) and some of i played live. to end the songs i push the stop button. In following, my problem: in some songs there is a crackle after i push the stop button and i…
-
How to fix problem Maschine MK3 can't appear in native access
download & install driver 😌 download & install native acces 2 plug in HW and insert Serial number HW Maschinde 3 able to download now note : the spesification about run these maschine 3 is important to follow
-
Maschine Plus Standalone Mode WON'T START, just loading
Hi Friends, I need advice or any help because Maschine Plus which I updated and used it in Standalone mode and after almost year of producing Hardware won't start I never touched SD card, it came with in from the Store. I have 3,4 GB free space and I am trying to export music to PC-Win 10 no matter how slow that process is…
-
Following the Getting started guide but I am missing Groups?
I am following the Quickstart Guide for Maschine located here: In there they are showing selecting a kit from the Group section. When I try that, I don't see anything in there? I made sure I am not in the User section. I did install a few things I must be missing some kind of a step or something else.
-
Auto Sampler: MIDI to is set to None
hellow! learning auto sampler and I'm stuck at this step: MIDI to has no option hence Start recording is greyed out. Not sure why I have to set a MIDI to since I'm sampling my Hydrasynth and it's coming via the RME Babyface Pro (3-4 via jack cable as regular audio - no MIDI) and set to Ext to In2 L+R in Machine, which…
-
Maschine MK3 Midi Script for Ableton as a Control Surface Not Working
Hello, I installed the Maschine MK3 midi scripts from Native Instruments for use with Ableton 12. It shows up as an option for a Control Surface in Ableton, but nothing happens to my Maschine MK3 hardware. It has not automatically configured as a control surface as the instructions state. Any tips?
-
what can i do as far as just using multiple Native Plug-ins with x1, the Plus, and s49 mk2 and 3?
i just wanna know if it can be done
-
Manually Trigger Patterns in Maschine 3 like Ableton or Logic (always starting from bar 1)
hellow! I just got back a Maschine Mk3 again and I'm having lotsa fun (again) using it as a sketchpad Was wondering if it's possible to trigger clips manually that would start on the next bar and from the beginning of the incoming clip, like it happens in Ableton or, nowadays, Logic? Would love to remix things on the fly…
