-
Timecode vinyl, Traktor 3, Audio 10
Hey hey, I have one question, I have an audio 10 with Traktor 3 lay with four decks on and control with Xone K2, would additionally but again my vinyl to control as time code. What do I still need ????
-
No audio in Traktor Pro 3. What settings should I use?
Installed Traktor 3 with no controller. Not getting any audio. What are the correct audio settings?
-
Traktor with Xone96 Mix Recording
Hey everyone. I've got the following issue and can't find a solution to it. I'm running Traktor 3.5.2 through a Xone96 connected via USB. Now it is possible to record the mix through outputs 11/12 back in Traktor, right? I've connected and setup everything exactly as it's described in the Xone96 manual. Unfortunately for…
-
How do I get my master clock / Fx bar to show in 4 deck mode?
I've been using Traktor for a few years now and have never figured out how to get the master clock and FX section to display at the same time! I've always thought it was impossible until I saw a couple tutorials on YouTube, they had them visible, but no one ever explained how to get them all to show up. Please help,,, I'm…
-
More precise VU Meters on Traktor software.
Hi there, I just wanted to put it here, that I miss on Traktor software a longer and more precise VU Meters indicators for individual channels, with green, orange and red. I have two different set ups and none of them have a very long and visually reliable vu meters indicators. On traktor software they are short and you…
-
Check consinstency does not resize window
actually it wouldn't be a request, but a correction, every time I have to check consistency, when analyzing carefully where the missing tracks are, I can't resize the window, to see exactly the path of the lost track. I do this every time a few days before I play, to see if everything is in its proper place. I think just…
-
Maschine + Traktor Mappings
Hi! I'm both a Maschine and Traktor user and decided to search for a decent mapping with clear instructions and purpose, I found one that suits my needs and it was (or is) free. It does 90% of what I wanted so I'll map the rest 10%. Do any of you have one that's already mapped for the Maschine Plus? I found one here:…
-
How do I map my maschine mikro mk3 to do certain things in traktor
The things I want to do is have each of the pads on one page be certain effects and their parameters and a dedicated button for the effect toggle to be either on or off as a toggle and the parameter pads as a hold to engage release to turn off deal, could anyone help me (if it matters its basically so I can not be bad with…
-
HID on xdj 1000 mk2, which Traktor routing for use with xone 43c?
Hi, I have this setup 2x XDJ 1000 MK2 (latest firmware) 1x A&H Xone 43C Traktor Pro 3 Macbook Pro 2018 12 "i7 I followed the HID connection instructions, and it went ok (Deck A and B were selected). I was unable to get the audio out of the Xone 43C's channels though. Can anyone tell me the correct setting of the output…
-
Upgrade my DJ Setup
First, I started Djing back in 2008 with 2 Pioneer CDJs 800 and a solid Pioneer DJM 800 , then switched to a digital DJ Setup with a 15 Inch MacBook Pro from 2010 , 2 Native Instrument Kontroller X1, a NI Maschine and an Audio 8 DJ from NI. Software was/is Traktor of course. I am currently planning on getting a new MacBook…
-
Traktor Pro 3.5.3: Use Existing File/MP3 BPM value? Showing as zero without Analysis.
Hi: I'm back once again with something so simple, yet seemingly impossible for Traktor. I pre-tag all my music files. I already have the BPM values set. When I drag a file from finder into Traktor, it shows as zero unless I analyze the BPM. I wouldn't mind analyzing, however analyzing will display Traktor's BPM value…
-
How to route maschine into traktor via 2 cdjs 2000 nxs 2.
How to route maschine to traktor via 2 cdjs nxs2. I tried with cdjs aggregate sound card but I have no sound. So I connected my audio 6 to route maschine. How to avoid this step and use same audio interface on traktor and maschine with cdjs?
-
Check Consistency Export & Invert Tempo Faders (TP3/Kontrol S3)
Hi: I'm running Traktor Pro 3 with Kontrol S3 on Mac Catalina. [Question #1] How can I export the results of "Check Consistency" on a collection? Something like export to CSV or XML file? [Question #2] How can I invert tempo changes done by a Kontrol S3 fader? I would like "up" to increase the tempo, rather than decrease.…
-
Is it possible to correct the 2 seconds delay when using AirPlay?
When using Airplay there is a default delay of 2 seconds, can this be corrected or removed? Thank you. Best regards.
-
Playlist issue
Hello everyone, there was at that time the error, which copied itself whole playlists, in other playlists "independently" into! Does anyone know under what conditions this happened? Greetings Rainer