-
Kontrol x1 not detecting on Catalina
HI...I recently upgrade to Traktor pro 3 from 2 on 2015 Macbook pro 15inch retina will a Os x of 10.15.6 Catalina with Traktor 3.5.2...My kontrol x1 controller is not detecting & the drivers are not available on Native website.
-
Traktor DJ 2 on Ipad Pro + Z2 + X1 setup works?
Good day! I want to run Traktor DJ 2 on my iPad Pro connected through USB-Lightning with a Z2 and connect X1 with Z2 also on USB. Would this setup work? It should be awesome! Thanks, Balazs
-
X1 mk2 - can i use the shift button to turn on/off the FX units for decks C and D
hi, apologies - i've tried getting my head round controller manager repeatedly, and can do some things with it, but i'm really butting my head up against this. anyway, my S2 mk2 gave up the ghost recently, so i'm getting a new S3, but am really bummed out about the loss of the track FX section. luckily i have an X1 mk2…
-
X1 mk2 fx assign buttons not working
Hi there, I recently picked up 2x X1 mk2's to be able to control 4 decks with an external mixer and I've found that the factory mapping has the fx assign buttons triggering the wrong assign button within the Traktor mixer. assign fx 1 button is triggering assign fx 2 within the mixer on one of the units and the assign fx 2…
-
S2 MK3 works with X1 and Z1 to create a 4 channel controller?
I have a S2 MK3 but I want to buy these controllers for using better the effects but also I want a more mobile setting with the X1 and Z1, but also would like to know if I can use the three together to have a 4 channel controller
-
X1 MK2 - how to display BPM by default?
hi i have a few questions is it possible to display bpm by default, instead of loop size? i don't find any output options for both tempo itself, and the LED on X1. is it possible to swap the primary function of loop encoder, with tempo adjustment (sync + loop encoder)? It seems i can't use shift + sth or sync + sth in…
-
Can't service my controllers, there are no parts
Hello, long time user here. 5 months ago, I took my S2Mk3, X1Mk2 and Z1 to be serviced, as they needed some new faders and some new buttons after years of frequent use. The service shops (I've asked all around Athens) can't find any parts, the (as the say) former Greek distributor can't find any parts, and I'm still…
-
Knob Kontrol X1 Mk2
Hi guys, I have a Kontrol X1 Mk2, with little use, I've had it stopped for about 4 months inside the case, now when I take it out I realize that there is a Knob that is really hard, before it was fine like the others, why is it this? Is there anything I can do? since the touch is quite uncomfortable. Thanks
-
Could we have Hotcues separate to normal cues please?
I don't really understand why hotcues are the same as normal cues. Because you want to setup normal cues for each track, beginning, breakdown, bassline etc But then you also want to punch live hotcues and have them not get confused with normal cues. Using the Kontrol x1 mk2 if I've made a few normal cues, there are none…
-
StreamLabs doesn't see Traktor signal
Hey there, I want to record live with camera. Streamlabs does not see the traktor signal. Can you help me? My Traktor X1 MK2, Z1 and Focusrite Scarlett 2i4 system
-
Need Help with Kontrol F1 and X1 Setup for Live Tekk Sets (Step Sequencer)
Hello dear community, I have a question about my setup and I hope you can help me. I use two Kontrol F1 controllers and one Kontrol X1 to play live Tekk sets. However, I'm facing some challenges and I need your assistance. Let's start with the physical arrangement of the controllers: From left to right, I have the F1, then…
-
Traktor Pro Plus: how to record when using pattern player in send mode (xone96)
Hi lovely community, im using an external mixer and bevor i used the pattern player i recorded my music internal with traktor. For this i used 'input fx return' and mapped it to channel 11/12 from my xone96. Activated the little push button/ switch to send master out trouhg channel 11/12. And in the 'mix recorder' setting…
-
Is it possible to re-map the SHIFT control on an X1 mk2 ?
Is it possible to re-map the SHIFT control on an X1 mk2 ? I'm presuming you have to go to MIDI mode, which is a pain as its too slow and too many button combos when you're in the heat of the moment.
-
Can I use Traktor Kontrol X1 MK2 Midi with Reaper?
Hey guys, anyone using this device as MIDI with Reaper? It mentions Ableton Live so I figure it might also work with reaper. https://www.native-instruments.com/e...or-kontrol-x1/ https://support.native-instruments.c...h-Ableton-Live