Traktor X1 MK2 mapping for browsing
Hi Everyone,
I recently purchased X1 MK2 as my MK1 was not compatible. One of the features I really enjoyed on MK1 is the browsing, selecting and loading tracks with the big knobs. In MK2 you have only the middle knob and the select buttons for browsing and loading tracks. I would like to map the 2 loop knobs for browsing and loading tracks. One for each deck, like it is on MK1. Is there a mapping for this option or do I have to manually do it? I have downloaded a few mappings but I am not even sure how to load them. I do apologise but I am getting old and out of touch with technology so if someone could help me step by step on how to do it it would be much appreciated!
Thank you
Comments
-
@Karlos Santos Any tips on the X1 MK2 you can share here?
0 -
Hey @dj unsung Yeah this can be done fairly easily with a little additional mapping. This is very basic but it will achieve what you want without getting into modifiers etc.
This will override the current functions of the Loop encoders.
Goto Preferences - Controller Manager (select the X1MK2 mapping).
Click on - Add In - Browser - Select Up/Down (Browser List)
Click on - Learn (turn the Left Loop Encoder and click on Learn again whilst holding the encoder. Don't take you hand off it until you have clicked on Learn again.) You should see the mapping in the screen shot.
You must check Override Factory Settings.
Repeat the above for the Right Encoder.
Now we'll setup the Load Function.
Click on - Add In - Deck Common - Load Selected
Click on - Learn (turn the Press Loop Encoder down and click on Learn again whilst pressing the encoder. Don't take you hand off it until you have clicked on Learn again.) You should see the mapping in the screen shot.
Make sure to make Assignment - Deck A
Repeat the above for Deck B - make sure that Assignment is Deck B.
You must check Override Factory Settings
I'm sure one of the mapping gurus on here will have a more elegant solution so feel free to chime in guys.
Let me know how you get on.
Karlos.
1 -
Thank you very much Carlos for your reply!!
Much appreciated!!
I am not sure if you can help me with another issue I have regarding live streaming.
Sorry Matt I don't have any tips as I am using it only for browsing and loading tracks.
0 -
Hey, I've replied to your PM, dude. Like I say, streaming isn't something I do but let's see what we can find out. You've got 2 of the brightest minds in that thread so there's probably not a great deal I can add.
Karlos.
0 -
It's for this very reason that I've never moved away from the MK1...
0 -
Hi Everyone,
I have a similar problem.
I only want to use some of the factory settings but want to add some more like:
-list consolidate
-load to preparation list
-delete selected from preparation list
-load to preview player
-pause preview player
-cruise mode...
Since controller manager shows an empty device mapping list when x1 mk2 is selected
I'm asking myself if at the end there are only my changes visible in that list, but not the factory presets I kept.
Is there any solution to have a complete list at the end?
Thanks,
Jörg
0 -
@Karlos Santos : what happens with the flashing display when I over-write? How can I tell X1 it can start working?
Is there any list where I can see the "original" routing of the factory settings?
Cheers!
1 -
Hi Everyone
QuQuestion on the X1 mk2, how can I map the current fx knobs to alternate into the lows, mids and highs. Could I use the fx buttons as cuts for high, mids and lows??
Peace
Mike
0 -
I've just purchased a K1 too and would love some map options which are not K2!
0 -
Check out DJTT MIDIMAPS section. There are several mixer mappings available to download. Test them out and let us know if you have questions or find bugs to report.
I al wrking on a superfader mapping for the X1 Mk2 where 0% to 50% is controlling the Low EQ and my 50% to 100% adds a high pass or a low pass filter (or a mixer effect). I did this because I newer turn the Low knob past center position (50%) and wantede to utilize it as a filter :)2 -
K1 and K2 are the same midi controllers basically. So K2 mappings will work on K1 too.
1
Categories
- All Categories
- 19 Welcome
- 1.3K Hangout
- 59 NI News
- 689 Tech Talks
- 3.6K Native Access
- 15K Komplete
- 1.8K Komplete General
- 3.9K Komplete Kontrol
- 5.2K Kontakt
- 1.5K Reaktor
- 349 Battery 4
- 775 Guitar Rig & FX
- 400 Massive X & Synths
- 1.1K Other Software & Hardware
- 5.2K Maschine
- 6.6K Traktor
- 6.6K Traktor Software & Hardware
- Check out everything you can do
- Create an account
- See member benefits
- Answer questions
- Ask the community
- See product news
- Connect with creators