-
Maschine plus: midi input, without recording, when not focused?
How can I use the m+ as a sound generator for external midi device with one group, while only recording on a different group when focused on it? i.e. Only record/play events on a focused group, while receiving/playing external midi on a different group without recording events on it. I assumed that if the global midi…
-
Clicking/Glitching when triggering pads on Maschine Plus
Hello - noticed my maschine+ is clicking/glitching when i hit a pads while other sounds are playing. It is coming out of the output (my pedals pick it up), but if I play a pattern the glitching doesn't occur. Seems to be with any pack loaded up, CPU is 20-30%. Changing output volume has no effect. Any ideas?
-
Maschine Plus - crazy overload when MIDI IN Sync enabled
I'm workin on my hybrid DJ setup based on Traktor 4/X1 MK3, MC-707 as Mixer/hub and of course Maschine Plus as standalone maschine project player. I was tasting syncing with Link but i don't like scenarion when I need to be connected with WIFI on stage, also Link SDK looks old on M+ for my. Anyway: When project is heavy…
-
Can spare PSU make Maschine+ unstable, too…?
It seems there’s a problem with the / my alternative Power Supply offered by NI, when used with the M+. I’m using this one when I take my Maschine Plus from the studio. Especially start-up and loading times are much longer or it even get stuck. https://www.native-instruments.com/en/pricing/power-supply-40-w/ This power…
-
How do I change the Native ID on a Maschine+ (bought used)?
Hi there, after working a while with Maschine MK3, I finally got my Maschine+ yesterday! 🤩 It seems to me that the Maschine+ is still synching the library with the former owners account. I arleady did enter the Transfer ID in my account on the web - all fine, but how would the Maschine+ know about this? Question: how do I…
-
Maschine+ and Traktor Pro 3 Synchronisation
I am attempting to integrate Maschine+ with Traktor (S4MK3) and I'm running into some Issues. I would like the Maschine+ to sync with the master tempo of Traktor, which I currently have working but I am unable to play scenes on the M+. I have it setup currently: Audio from M+ to S4 Deck C Midi: Generic Midi device to M+…
-
External hardware midi sequencer is glitching the M+ out when REC is enabled
Hi everyone, Back again for more of the same. I'm using a Polyend Tracker as the master sequencer for all my gear. I've got everything running well and as it seems it should on the Maschine+ only for one issue. I think the best way to explain this is thru an illustration: I have Group B set to receive MIDI channel 2 and…
-
How to loop sample to infinity without holding the pad
Good evening, I have recently bought the Maschine+ and it works great. I just cannot find one thing, that is important to me. I want to import sample, then press pad with this sample and it should loop to infinity, without holding the pad. When I set the sample as One-shot, it cannot be looped. When ADSR, I have to hold…
-
Maschine + Question
If i go to settings, choose MIDI then it show me the first popup menu and it stays all the time, or if i change parameter in another popup, after this, the first popup menu is opening and never closed. Is this a software fehler OR is a disconnection in the Hardware (for example the data cable, it can be, that one of this…
-
Is it possible to make a pattern less than 1 bar long?
I would like to make patterns that can create polymeters where one track repeats at a differing length from another.
-
How to keep the chord sets visible on the right display of Maschine+ after switching on Note Repeat?
Does anybody know here a way to keep the chord sets visible on the right display of Maschine+ (or possibly Maschine MK3) after switching on Note Repeat/Arp? (In chord mode) When I’m using it it switches to a kind of event view, and I can no longer tell which pad represents which chord set without taking a picture or…
-
Is it possible to record a hybrid set : the dj part from traktor pro 3 and the live part (maschine+)
hi everyone ! I saw that it was possible to do a dj set with traktor pro 3 + controller and a live performance with maschine + (with maschine + plugged to maschine software) So i was wondering if it was possible to record both the dj set and live set in one audio file ? Tell me if I’m not clear :)
-
How to export MIDI of a pattern in stand alone mode?
Hi, I'd like to export the MIDI of the patterns I created. I'm using Maschine+ in standalone mode. I tried the File → Export option, but all I get is the option to export audio. Is it even possible to export MIDI of patterns if standalone mode? If not, anyone know how I can export my patterns as MIDI? Thank you.
-
Things we wished we had better understood when first using Maschine.
still very much new and learning but … For me, I wish I had seen/understood- in an all caps, blazing, etched into my retinas font- these sentences: EACH PAD CAN HAVE IT'S OWN, INDIVIDUAL AUDIO/MIDI SETTINGS AND ROUTINGS AS CAN EACH GROUP CAN HAVE ITS OWN, INDIVIDUAL AUDIO/MIDI SETTINGS AND ROUTINGS This would have helped…
-
Maschine + Update when i turn it on (Maschineplus)
When i turn my maschine + on, this messages appears but when i do update, it doesn't find the update, any options? cause i can't use my M+…