-
Maschine Hardware: Design That Endures
Proven Design Philosophy The Maschine hardware series, maintaining roughly the same number of buttons and navigation aids for over ten years, clearly proves it's on the right track with design decisions. This is evident in Akai's MPC XL choice, which the company presents as the flagship standalone and adopts similar…
-
maschine plus stuck on startup screen
Hello, I Bought a used maschine plus off guitar center, plugged it in and it was working fine in standalone mode. I tried to register the serial number to my account and there was an error saying it was already registered to another account. I sent in a ticket with all the info needed, receipt and pic of the serial numbers…
-
Registering a used machine, plus
I bought a used machine +2 1/2 weeks ago and opened a support ticket. I have yet to hear anything from native instruments. It’s been two weeks. That’s a little bit ridiculous as far as customer service in response time for a support ticket the issue is the unit is turned on and everything works perfectly fine. I have…
-
Maschine Poly Synth - Pulse Oscilators leak high energy. ¿DC correction?
Just decided to give a chance to PolySynth, after years of using VSTs for this range. And I was very satisfied with the easyness of use and specially its clear page disposition of controlls. I will still hold my opinion about sound, as I need to explore more. However, noticed that when using Pulse Osc in widths different…
-
inMusic FLOW — A Vision for the Next Generation of Music Hardware
From my point of view and my experience working with Akai MPC and Maschine, I imagine the future not as two separate worlds, but as the evolution of both philosophies into a completely new type of instrument. I call this concept: inMusic FLOW A hybrid standalone performance system that combines the strongest ideas from…
-
Maschine Plus Error When Registering the Hardware
Q: Translation inserted by Moderator (translation by DeepL) Hi everyone, I just bought a used Maschine Plus. The seller sent me the ID to register it to my account. I received the ID, and it was successfully registered to my NI account—everything was fine up to that point. Then I decided to do a factory reset to wipe it…
-
Maschine+ Bricked: Stuck in Registration Failed
Hi, I bought a used Maschine+. The seller gave me the license, I activated it on the Maschine, everything was perfect. I decided to do a factory reset, and now here's the problem: when I turn it back on, I connect to Wi-Fi, log in to my account, and it never activates at step 3 and gives me an error message. I read a…
-
Maschine + standalone internal processor
is it possible to procure a replacement “standalone internal processor board”?
-
Native Instruments Changes Priorities
From the Official Site - Music Creation - Hardware page: BEFORE: ___________________________________________________________________________________________ ___________________________________________________________________________________________ AFTER:…
-
Maschine+ Loopstation
Q:Translation inserted by Moderator (translation by DeepL) Is it possible to use the Machine+ as a loop station? If so, how? Community Code of Conduct - Please read before posting : Quote : Our community is currently only available in English. Please be advised that we retain the right to remove any posts in languages…
-
How to fix heart problems caused by Maschine+ SD Card?
Like many of us, I imagine, yesterday I turned on the Maschine+ and found the firmware and Kontakt to update. I started with Kontact and then the firmware: everything seems to be working fine. The Maschine automatically reboots, and after about two of them, the fatal message that the SD card wasn't recognized, asking me if…
-
How to assign a MIDI CC to Maschine+ knobs so they continue to work when switching screens.
Q: Translation inserted by Moderator (translation by DeepL) I don't think you can assign a MIDI CC to the 8 Maschine Plus knobs and have them continue to work when switching screens to the Mixer or a plugin, for example. Could someone please tell me if that's possible? Community Code of Conduct - Please read before…
-
Maschine as plug-in stuck in "focus" mode
I have Maschine as a plug-in in Logic. I have used the 16 channel version, and created 16 tracks, so I can route midi to each group in the plug-in individually. Each group is set to midi-mode = Drumkit, because each sound is a sample. I'm not using a synth per sound slot or anything like that (yet). Each sound in a group…
-
Maschine V3 software slow when used as a plug-in
I'm trying to use the Maschine software as a plug-in with Logic 12.2. I can playback in sync, and record the various group outputs of Mashine onto tracks in Logic. But when I open Maschine to edit something, it can get brutally slow. For example if I want to adjust velocities of drums in a group, I often can't. The scroll…
-
Maschine+/Mk3: Missing Option to Convert a Single Pattern to Clip – Feature Request
Converting a single Pattern to a Clip in standalone or controller mode is currently not possible. Right now, Maschine+ converts the entire Scene instead. On the other hand, the software can convert an individual Pattern. For workflow continuity, this should also be possible on the hardware. A potential solution would be to…