Mac
Discussion List
-
Audio interface to control Traktor 's 4 decks with a 4channel external mixer
Hello! I am looking for an audio card with which I can control the 4 decks of Traktor(I use a macbook pro) with external 4 channel mixer .Previously there was audio 10 but the KOMPLETE AUDIO 6 that comes out now ,I do not understand if it will serve me for this purpose. At the moment the audio card I have is the focusritte…
-
I can hear the sounds but cannot record on the mahcine2 track in my Cubase setup.
I have connected the machine+ to my computer via usb. In cubase 11 pro - I have created a track with the machine2 software. When I hit the pads on the Machine+ I can hear the sounds and see the midi signal - but when I try to record on the track it wont record... however, if I use my komplete keyboard I can record... I…
-
How can I make the Kontakt Player work in Logic?
Hello, Mac user M1 Laptop, Logic Pro; I can install the (free) Kontakt player in a Logic Project, load an instrument, hear the sounds triggered through the little keyboard featured in the GUI but can not trigger sounds through Logic. My MIDI is working. I can play stock Logic (EXS, Alchemy, etc.) sounds as well as third…
-
Major problems since upgrading to an M1 Max Macbook
Hi all, new to the forum here and a big hello! Love the Maschine MK3. It really is something :-D However, I am currently having a pretty terrible time with my setup since upgrading to a new M1 Macbook Pro. Has anyone else experienced any of the following problems I am? 1) When browsing through sounds, suddenly (after 10-20…
-
Is it possible to re-map the MIDI controllers?
Tested by recording in Cubase, I found that the MIDI controllers at the top of M32 are mapped to MIDI 80 ~ 87 by default for smart pre-map as advertised. However, in normal workflow I would prefer mapping the controller buttons to usual MIDI controls (i.e., 1 2 4 7 10 11 14 64 for me). Is there a way to do that? Also, a…
-
Sound output from mic connected via USB to MacBook Air
I am not getting any sound output from my Shure SM58 connected to a MacBook Air. I am using Live Input, I see the input registered, but there is no output. I tried recording, and there is no sound wave. I am wondering if my problem is that I am wanting to connect my mic directly into my laptop, and not through a…
-
Traktor S4MK2 controller failed- bought same used model and have no output sound/headeadphone audio
Urgent-- Please help! :) My Traktor S4MK2 controller failed- bought same exact model used and now have no output sound/headeadphone audio preview. I can play, loop, basic stuff that software sees and reflects but no audio output and says : please check your output routing, I have tried all options and nothing seems to work…
-
how to get Kontakt or Logic to receive MIDI input from the Komplete Audio 6.
Hi! I'm a new Audio 6 owner. I was hoping to connect my MIDI keyboard to the Audio 6, and that the Audio 6 would send MIDI data to my Mac via the USB connection: MIDIController--MIDICable-->Audio6--USBCable-->Mac I can't figure out how to get Kontakt or Logic to receive MIDI input from the Audio 6. Is the Audio 6 supposed…
-
Initalazing GUI freezes Maschine Software when Start-UP
Hey everyone, When I start my Maschine Software it completely freezes when Initianlizing GUI. I reinstalled the software, I went to Library and deleted all the Applications. It was working just fine yesterday its so weird. Does somebody knows what to do by any chance? Thank you so much! I am using a M1 Max chip.
-
Can I use the full version of Kontakt on both MAC and WIN?
Hi, I'm planning to buy a Full Version of Kontakt 6. Just a quick question: since I'm working on Logic in OSX and also work in Studio One in Windows, could I install use my Kontakt License in both OS? Note that I'm not working on both at the same time. Thanks in advance.
-
Traktor Kontrol S2 driver on MacOS Catalina
Hi! I am not able to install the Traktor Kontrol S2 driver on my computer. I use MacOS Catalina version 10.15.4. It states that it is incompatible with the system. How should I proceed? Thanks!
-
Traktor S4 MK1 not working on 64-bit Mac
Good evening, I need help. I have an Intel-based mac. Unfortunately I have to update it to the 64-bit Mac OS version for the dmx light controller but the console will not work. Can you please give me a solution? Is there any way to get tracktor to work on 64-bit Mac Os? Thanks in advance.
-
Kontakt 6 not activated after crossgrade
I bought a Kontakt 6 (Crossgrade). However, it is not activated after purchase. Only Komplete Start exists in the serial number. I can't get Kontakt 6. Please solve it quickly. Please help, I am a student.
-
Why does sound drop/skip at times when using Kontrol X1 MK2?
I recently purchased a new Mac and now the sound drops/skips at times only when using the Kontrol X1 MK2. All drivers/software is up to date. All. components work great except for when using the Kontrol X1 MK2. Note, I never had this issue on my previous Mac with a different OS. Any help would be greatly appreciated. Set…
-
Kontakt 6.7.0 crashing as standalone and in Ableton Live 11 with MacBook M1 Pro/Monterrey
Kontakt is crashing when opening it as standalone and in Ableton, also Ableton is not recognising VST2 Kontakt 6.7.0 on MacBook Pro M1 with Monterey, I already know I made a mistake by getting Monterey, but I know some people can still run Kontakt. Komplete seems to be working fine except for the libraries that are linked…
Popular Tags
- Traktor Pro 3 1,044
- Kontakt 6 962
- Maschine 2 SW 666
- Native Access 587
- Maschine MK3 576
- Maschine Plus 555
- Komplete Kontrol SW 492
- Kontakt 7 424
- Feature Request 392
- Reaktor 6 283
- Native Access 2 230
- Bug 219
- Mac 214
- Traktor 211
- Guitar Rig 6 209
- Komplete 209
- Maschine 209
- S4 MK3 205
- Logic Pro 202
- Ableton 200
- Komplete Kontrol Keyboards 181
- Battery 4 163
- Apple Silicon 160
- Kontakt 160
- Windows 158