-
Projects Location
Has anyone moved their PROJECTS (not LIBRARY or SAMPLES) folder to an external hard drive. And if so, How did you do it and make it accessable without having the system error popping up CAN'T LOCATE?
-
Vocalsynth2 sidechaining
I'm looking for help with setting up sjidechaining mode in vocalsynth2. I've watched several video and still can't get it to work. I am using the Maschine DAW. I can send an out signal to a track that only has vocalsynth2 on it, but I can't send an in signal to vocalsynth2. Any help would be appreciated.
-
Is it worth upgrading an AMD 5800x to 5950x for Maschine 3 Software
Is it worth upgrading an AMD 5800x to 5950x for Maschine 3 Software? the 5950x is at 250€ now… Or is it better to get an Intel Cpu? Or AM5 Cpu? I Have no clue how maschine consumes cpu power, can it use multiple cores or only one core, is it optimised for amd or intel and so on… is a signifant power boost possible for not…
-
Icons user library Maschine 3
Hi, Would anyone finally have a solution to this problem in Maschine 3 ? Knowing that my files are fine in: '/Users/Shared/NI Resources/image' Everything worked very well in Maschine 2. Thank you.
-
M+ computer internals + info
There was a thread in the old forum with some pics but not here so I am making one. This is probably of no interest to most users, it's just for curious nerdy ones I guess. Obviously, I do not advise anyone to go opening their 1200$ device, if you do and screw it up it's on you! I lost a screw in the process as I always do…
-
Piano Roll Zoom vertical from Hardware
Hi , is it possible to zoom vertical in the piano Roll from the Hardware? I know,i can zoom with my mouse By making the zoom bar on the right smaller, but I would like to be able to control it from the hardware. I know that you can zoom horizontally, but what about vertically? My problem is that the piano roll is so…
-
Is there an API for Maschine+?
Looking for an API interface for controlling/interacting with Maschine+ hardware.
-
Maschine MIDI Silently Outsourced to Bome
NI quietly and only recently outsourced MIDI routing for Maschine to Bome, without informing users or documenting the change. This shift was embedded in a software update that silently installed Bome’s virtual MIDI infrastructure, rerouting control surface data through proprietary channels. Users who previously relied on…
-
Stop M+ from leaving pad view after duplicating a pad
I've been doing a lot of work lately with Machine Plus standalone, and compiling some of my favorite samples into kits. The one thing that completely drives me mad after an hour of editing is that whenver I duplicate a pad from one group to another group, Maschine doesn't keep me in the PAD view, it always bumps me into…
-
Maschine Plus - Maschine 3 Update: What's new
What’s New – Maschine 3.3.1 on Maschine+ Maschine+ just leveled up. The latest 3.3.1 update brings the power of the Maschine 3 desktop engine to your standalone hardware; unlocking a unified creative platform, improved performance, and smarter workflows built for the future. Unified Maschine Engine Maschine+ now runs the…
-
Can Maschine Plus support the connection of my equipment?
I have a specific dawless setup in mind I'd like to have with the Maschine Plus which will inform if I buy one. I want to connect a Drumbrute Impact as a MIDI controller/sequencer for the drum sounds on the Maschine and record these. I know it can do this. I want to connect an Arturia Microfreak so that the Maschine…
-
Maschine Mikro mk3 + Battery 4
Hi there! Just a simple question about a setup… Do you have any idea how to make a routing with BATTERY 4 and MachineMikro mk3, running o Logic Pro (with separate audio and MIDI tracks)? The main idea is to make a setup, controlling the Battery 4 kits, with the Maschine's Pads, and record all the information (MIDI + Audio)…
-
The website shopping cart is broken - I can't add "Maschine 3" to cart (logged in user)
Hi All, Just wondering if anyone else is having the same issues, I tried on Brave, Firefox, and Edge. After clicking "Buy Now" on the Maschine 3 product description page, it does not add anything into the cart. Hope someone can help, thank you.
-
Workaround for input gain
if I want to leave my audio levels where they in my mixer, but still control the input gain like I would so with the Utility plugin in Ableton Live to adjust the volume levels of my sounds, what plugins in Maschine would allow me to reach a similar result?
-
Airpods Series 4 Latency
Hi, I've just discovered that the AirPods support Core Audio with macOS Sequoia. Setting them up as mono, 24khz, 32 bit results in an output latency of only 10 ms in Machine. That is sufficient to record pad input in the most convenient manner.
-
Mschine MK3 not working
Hi, i have a Maschine MK3 hardware with a Maschine 2 software installed on a Macbook pro M1 with OS12.6.7, the software is running but the Hardware is not working eather with the audio or the Midi, with the NI software or any other... It's reconnized by the soft but the Maschine MK3 still show "MASCHINE Production and…
-
Error loading sounds, instruments from Maschine 2 Factory Library
Hey, I'm posting here, since I cannot seem to find a way to contact support. I've purchased a second hand Maschine MK3. I got a new serial number for "Maschine 2 Essentials Application for S-SERIES Keyboards". I downloaded it via Native Access, but after starting it, it didn't contain any instruments, sounds, etc. So I…
-
Plugin latency
Hi, NI Team I have a question and an idea at the same time. Have you ever considered adding latency compensation in Maschine? There are lots of great plugins that unfortunately can't be used during production, and the same goes for external audio processors, which also introduce latency. Maybe this feature could be…
-
New Maschine?
We are being over the head with the impending release of MPC. Please give us a reason why we should stick with maschine,because at this point it’s getting real frustrating. I really love machine. Please give us a reason to stay. Please just give us something . We don’t even have midi routing nothing I’m done. I’m done.
-
interested in buying expansions and maschine+
i dont want to work with computers minimum as possible. im willing to buy maschine+ as it would run NI "vsts" im interested in a few expansions notably this one: https://www.native-instruments.com/en/products/komplete/spotlight-collection/middle-east/?srsltid=AfmBOorWXeIZ-wJ_yxSk3zMvEOnNow0LOMWuMdsLOpd0dKDJ1HvfWIR7 will it…
