Maschine
Category List
Discussion List
-
Maschine mikro mk3 not registering in Native Access
I just bought a Maschine mikro mk3. I registered it with serial number on NI website. When I open Native access, nothing is up to install except freewares. No maschine software and no Komplete 14 select neither. Can someone tell me what is the problem?
-
Maschine + Stuck on Start up screen
Hello Everyone, I have a Maschine Plus that I have had for less than a year now and it will not boot past the start-up screen in Standalone mode. It works fine in Controller mode, but for some reason, it will not load up in standalone mode. I have tried just about everything. I have reached out to NI Support, but have not…
-
No aftertouch?
Is it true that Maschine doesn't receive aftertouch? Even though they've been selling $1000 Maschine-integrated keyboards with aftertouch for 8 years? This should be an outrage.
-
How to change the midi notes of the pads using Controller Editor
I made a video that explains my question;
-
M+ standalone and updating
Go to settings> system. You get the message “your maschine is up to date” press shift and scan” you will get “system update downloaded, ready for installation, do you want to install it now?” You will have a countdown timer from 60, or press later. It seems that the last update is always held in cache, and you can…
-
Maschine plus no longer syncs to midi (serious issue)
I had a crash as per this thread: https://community.native-instruments.com/discussion/4379/maschine-plus-selecting-pad-as-aux-output-destination-is-buggy-and-causes-crashes#latest Since then, my Maschine plus will not sync to midi. I have been using a Squarp Pyramid as midi master and syncing the M+ with that for weeks now…
-
How come when I select a tile under User it unselects
I have a bunch of user sample collections in my Content screen. But when I move the encoder to select one other than the first top 3, the selector just moves back to the first one. Preventing me from selecting it from the hardware. This only happens when attempting to select one from the hardware. I can select it without…
-
M+ Crackling noise, bpm decrease and sound loss when switching scenes
I have a new Maschine+, fully updated to latest firmware and software versions: System 1.4.4.0 Maschine 2.16.0 (R112) Firmware 0.1.9 I was browsing through example projects, playing around and I would like to know, if anyone has stumbled upon this issue which can be reproduced like this: select projects -> Mother Board ->…
-
Trying to use the timestretching on Maschine plus without unwanted audio artifacts
Crackling noises: This is happens in a lot of situations. To my use the most debilitating example of this is when using the "Audio" plugin. We use this plugin whenever you want to have a audio track locked in tempo and optionally, pitch. If you want to make some use of the audio plugin - say making the tracks in some other…
-
Maschine & Komplete kontrol parameters do not respond well to mouse input
Im running a M1 MacBook Pro 12.6, Ive zipped 2 video example of just a standard drag of a mouse as normal and the results are as shown. Pretty unusable often, its not always the case but more often than not, this is what happens! :) Hopefully it will be addressed in an upcoming update
-
saving issues
Hello everyone in Maschine + land. Just bought my + 2 weeks ago. three days after. I take it out of box and realize its an open box buy.. It is updated on firmware and version etc. It will not save anything I create. I do save as, make a label, turn the machine off or go to software and come back and file will not load. I…
-
how do you automate tempo changes ?
you can automate tempo changes on the maschine + yes ? can't find anything about it in the manual
-
Using MK3 Encoders in Ableton Live 11
Hey guys, I use maschine 2 vst version inside of live 11. The NI live template does work. I also use the unoffical script 1.6.0 from gumroad which is great, but the mk3 encoders are not working at all. I reached out to NI support and they send me a script where I can use the encoders to control abletons effects (blue hand…
-
Third party Plugins recognised but not in Menu (Maschine 2)
Haven't found anything else on this and have been searching for a bit. I got some third party Plugins for Maschine 2. After a while or trying and copying and pasting around, I managed to get the DAW to recognise them in the plugins pane in preferences. But they're not showing up in the menu? I.e. they're recognised but I…
-
Parameter Glitch in Maschine 2
Good morning from Philly. When I adjust parameters in Maschine 2, it jumps to random numbers unless I move it very slowly. the quicker I move it, the more random. This happens both with the mouse in the software, and on the hardware with the encoders. This has only been since the most recent update. hope you all fix it…
Categories
- 12.4K All Categories
- 21 Welcome
- 565 Hangout
- 69 NI News
- 273 Tech Talks
- 1.3K Native Access
- 5.8K Komplete
- 763 Komplete General
- 1.4K Komplete Kontrol
- 2.1K Kontakt
- 568 Reaktor
- 186 Battery 4
- 316 Guitar Rig & FX
- 222 Massive X & Synths
- 280 Other Software & Hardware
- 2.6K Maschine
- 24 Sampling Room
- 3.1K Traktor
- 2.9K Traktor Software & Hardware
- Check out everything you can do
- Create an account
- See member benefits
- Answer questions
- Ask the community
- See product news
- Connect with creators
Popular Tags
- Traktor Pro 3 1,058
- Kontakt 6 967
- Maschine 2 SW 671
- Native Access 589
- Maschine MK3 580
- Maschine Plus 557
- Komplete Kontrol SW 497
- Kontakt 7 438
- Feature Request 393
- Reaktor 6 284
- Native Access 2 235
- Bug 222
- Mac 217
- Traktor 213
- Maschine 212
- Guitar Rig 6 210
- Komplete 210
- S4 MK3 208
- Logic Pro 203
- Ableton 201
- Komplete Kontrol Keyboards 182
- Kontakt 166
- Battery 4 166
- Windows 162
- Apple Silicon 160