-
New Audio PC
Hi! I'm want to buy a new PC and I have some questions. I hope you can help me. This is the PC I would buy Prozessor (CPU) Intel i7-13700K | 8C+8c/24T, 3.40-5.40 GHz Arbeitsspeicher (RAM) 32 GB, 2 x 16 GB, DDR5 Grafikkarte Geforce GT 1030, 2 GB, lüfterlos Systemlaufwerk M.2 PCIe SSD Samsung 980 | 1 TB M.2-Modul 2 M.2 PCIe…
-
Binaural Beats
I want to create Binaural Beats and have most NI products. Is there a way with their instruments to generate a sine wave at a particular frequency, say 440, and another at 470? I suppose I could use a standard keyboard note like A=440 but then would need the same note slightly detuned by a specific # of hertz. I'm pretty…
-
Placement Ideas for 61 or 88-key MIDI Keyboard With Argosy Halo Desk?
Hello all! I'm currently in the middle of renovating my home studio and we recently acquired the Argosy Halo desk. It's a very ergonomic desk and it houses our mixer and other gear very well. It has also helped us save lots of space. My one concern though is finding a good place to fit at least one good-sized (as in: 61 or…
-
Kontakt 7 wont register with serial number given
My kontakt 7 (crossgade) will not register in native access. when i enter the serial number it says "invalid serial" and i know its the correct serial becuase ive typed it in exactly about 20 times. when i load up kontakt 7, it loads up in demo mode. by the way everything else registered in native access sucessfully except…
-
Top sound quality dj mixer
I'm sure this has been covered if not beat to death, I'm trying to research the best sound quality available in a small or simple mixing board. Something capable of controlling two or more amps and mixing vinyl and or CDs. All too many of these are and sound like junk with cross channel noise, 60hz hum, cheap pots static…
-
The magical things modern computers can do.
I had fun today playing a mixture of a Rhodes blended with an FM synth Rhodes and controlling the volume of a string section with my left foot. Amazing how low the latency is, it's like gone. What a perfect time to get started, thirty years ago just having a midi sequencer was all we really had.
-
Best CPU for orchestral production
Title says it all. Specifically between these three: Procesador Intel Core i7-12700, S-1700, 2.10GHz Procesador Intel Core i5-12600K, S-1700, 3.70GHz Procesador AMD Ryzen 9 5900X, S-AM4, 3.70GHz For usage with Cubase 12
-
Moving Logic, Native and all plugins to Mac Studio question
I'm moving everything to the new Studio and recalled there were some specific gotchas installing the Komplete stuff and all. Appreciate any thoughts on this and any previous posts that outline it. cheers, J
-
Not NI -relevant - but how to BATCH normalize overdozens of WAV-files on OSX?
As audio-editor i use OcenAudio ... it´s a really great Donut-Ware! But there is no possible to BATCH (simple stunts like NORAMILZE....) lot of files&wavs.... How can i do this on OSX 10.15???
-
Permanent discount on Output engines
Hi, I just read that after the discount right now ends, output essential engines will be 53% off permanently. I wonder what sense a 50% off discount makes which is being superceded by a 53% one, but that is great news, albeit kinda mysterious ones
-
Where can I find a side desk piece like this?
In many recording studios (especially ones running analog consoles) I've seen this nifty little side desk/cart-like piece of furniture. Does anyone know where to find these? I'd like to put one up to the side in my recording studio. I've attached a picture, demonstrating the piece of furniture I'm referring to.
-
Traktor Kontrol S2 MK3 with Synthesizers Korg or Behringer
Hi there, I am expanding my DJ set up. We are 3 friends experimenting and playing with different sounds. For know we used the S2 with filters and the f1 for jamming together. In the future we want to try something with the microphone and a synthesizer. Now we are thinking about buying a synthesizer with keys, so each of us…
-
NI DAW?
Does NI make any DAW programs? I know you have those soundless USB Midi Controllers like Akai and anothers.
-
Issue with opening Kontakt
Okay so this morning i was having some issues so i opened up NI and hit re-install on all of my products. So after it was completed, I went to open up Maschine and it gave me the error that Kontakt could not be loaded. So I've tried to close Maschine and open Kontakt standalone...nothing. I Run the program as an admin and…
-
My PC won't start
Despite taking every care when rebuilding it. The studio computer doesn't work. No signs of life. No fans turning. I've just tried all the fixes I know except changing the power supply. This is a brand new power supply so it should be ok. Well I put it in when I changed the motherboard a couple of weeks ago. That was only…