-
Maschine Plus footswitch latency
I have a weird issue with Maschine Plus where using a footswitch to start and stop recording in Sampling mode has a significant amount of latency (about 1.5 seconds). This doesn't happen when using the buttons on the device, or when using the footswitch to start and stop playback when not in Sampling mode. It used to work…
-
MIDI from Maschine + into Logic Pro recording issue
I bought the Maschine + a year ago and had a few head-achy weeks grappling with how it works - I am a Logic Pro user of over 20 years and I was told by a sales rep the Maschine system would be easy for me - it wasn't - my conclusion was it was overly complicated and illogical - so I put it to one side. Recently I installed…
-
Difference in standard between AD and DA converters on Maschine Plus.
I transferred digitally, nine sine waves from a computer to Maschine Plus: 20, 50, 100, 500, 1000, 5000, 10000, 15000, 20000 Hz. I played these through the output and recorded them into Izotope RX 7 via an Antelope interface. The recorded sine waves were identical to the original sine waves. However recording the same sine…
-
Project and Group management on the M+
Does anyone have any tips or best practices for managing Projects and Groups within the Maschine+ standalone? Specifically, can you tag different groups/projects or save them in subfolders on the SD card? For projects, it's a pain to scroll through the full list of projects without any other information (e.g. create date,…
-
Who you gonna call? Ghostbusters! (Maschine MK3 ghost knobs Fix)
I bought my Maschine MK3 when it first came out, and for years I couldn't solve the infamous "ghost knobs" issue... random parameter changes, settings moving on their own, and occasionally pads lighting up for no apparent reason. Online, and even here, a lot of people suggest checking your USB cables, power supply, or the…
-
"I need options" (and not another Linux rant)
So I'm sure people are going to say its emotional or projectionism, and maybe mostly rubbish; I'm tired of having to be a technician/engineer/admin. I wanted to be a musician, a performer and creative. This year Microsoft ended support for Windows 10. Making 3 of my 4 studio PCs redundant. "Throw them away" said Microsoft…
-
Maschine+ does not properly "save with samples"
I'm using the hardware M+ standalone. I have had issues since upgrading to Version 3, and now I cannot 'save with samples' properly. I usually save projects, with samples - and then load the SD card into my computer to make backups of my projects, however I was working on a project the past two days, and when I looked at…
-
Maschine Hardware: Design That Endures
Proven Design Philosophy The Maschine hardware series, maintaining roughly the same number of buttons and navigation aids for over ten years, clearly proves it's on the right track with design decisions. This is evident in Akai's MPC XL choice, which the company presents as the flagship standalone and adopts similar…
-
maschine plus stuck on startup screen
Hello, I Bought a used maschine plus off guitar center, plugged it in and it was working fine in standalone mode. I tried to register the serial number to my account and there was an error saying it was already registered to another account. I sent in a ticket with all the info needed, receipt and pic of the serial numbers…
-
Registering a used machine, plus
I bought a used machine +2 1/2 weeks ago and opened a support ticket. I have yet to hear anything from native instruments. It’s been two weeks. That’s a little bit ridiculous as far as customer service in response time for a support ticket the issue is the unit is turned on and everything works perfectly fine. I have…
-
Maschine Poly Synth - Pulse Oscilators leak high energy. ¿DC correction?
Just decided to give a chance to PolySynth, after years of using VSTs for this range. And I was very satisfied with the easyness of use and specially its clear page disposition of controlls. I will still hold my opinion about sound, as I need to explore more. However, noticed that when using Pulse Osc in widths different…
-
inMusic FLOW — A Vision for the Next Generation of Music Hardware
From my point of view and my experience working with Akai MPC and Maschine, I imagine the future not as two separate worlds, but as the evolution of both philosophies into a completely new type of instrument. I call this concept: inMusic FLOW A hybrid standalone performance system that combines the strongest ideas from…
-
Maschine Plus Error When Registering the Hardware
Q: Translation inserted by Moderator (translation by DeepL) Hi everyone, I just bought a used Maschine Plus. The seller sent me the ID to register it to my account. I received the ID, and it was successfully registered to my NI account—everything was fine up to that point. Then I decided to do a factory reset to wipe it…
-
Maschine+ Bricked: Stuck in Registration Failed
Hi, I bought a used Maschine+. The seller gave me the license, I activated it on the Maschine, everything was perfect. I decided to do a factory reset, and now here's the problem: when I turn it back on, I connect to Wi-Fi, log in to my account, and it never activates at step 3 and gives me an error message. I read a…
-
Maschine + standalone internal processor
is it possible to procure a replacement “standalone internal processor board”?