-
Maschine Plus - Encoder does not work on TEMPO button
Machine+ System 1.4.5.2 Machine 2.16.1 (RO) Firmware 0.1.6 After today's firmware update, the TEMPO can no longer be adjusted with the encoder (while the tempo button is activated - the light on the button works). Velocity and Swing can be manipulated with the encoder without any problems. Do I have a hardware problem?…
-
Reaktor instruments for maschine plus stand alone
Hello Maschine plus users , I'm developping Reaktor synthesizers for one year to be used on Maschine plus stand alone with low CPU consumption. I presented the first one at synthfest 2024 in France. The main features of these reaktor instruments are easy to use with a low amount of controls ,low CPU consumption and a new…
-
Native Instrumenta vs EVERYTHING
I Find that using the expansions in NI more quicker and easier than venturing out to other sources. they have ALL the effects and Instruments required to make every project Ive worked on. Whether its HIP HOP ,R&B ,GOSPEL ,JAZZ or Scores.. they offer far more than enough to use, to get the job done..
-
Dedicated Mini PC | Maschine & Traktor
I have a Lenovo ThinkCenter M715q MT Mini PC. I want to configure it to be a streamlined purposed built computer for Maschine and Traktor. The small form factor neatly fits under Maschine MK3. Are there any tips, tricks or best practices for configuring this computer running Windows 11? Thanks
-
Maschine+ User Samples Management
Hello everyone. I have a question about handling samples in the standalone Maschine or Maschine Plus. I’m using a USB stick with samples on it, around 50 or 60 files. When I open the library, I get a list of all the possible samples. However, I would like to have them organized so that, for example, I have a group of 10…
-
better support for external audio interfaces in maschine +?
hi, in the new update there will be better support for external audio interfaces? i am particularly interested in support for behringer mixers (xr18, flow8) with most external interfaces maschine starts but stops after a while and you have to reselect the interface to make it work again.
-
Possible to save default preset/setting for recorded audio?
Hi all, I know it's possible to save a default preset for the Sampler in Maschine. But when recording audio, it seems like Maschine uses a built-in preset which automatically sets the samples to ADSR, which is different to my already set preset. Is it possible to customize this? Thanks, Nico
-
NI Branded ARM Kontroller
Hi Folks, Is there any change that NI would release an add on ARM based Kontroller than runs all of the software of Maschine+ but with updated hardware? I am thinking about a modded Orange Pi 5+ that connects via USB to Maschine MK3 and Maschine+
-
Reaktor instrument crashes Maschine plus after updating to firmware version 1.5.1
Hello , I have an issue with a reaktor instrument on the Maschine plus after updating to version 1.5.1. The monophonic version works well i turn the same instrument into a polyphonic version, i load it into a "Sound", it work well but when i clear the "Sound" the Maschine plus crashes sometimes. That never happend on the…
-
Tips for moving projects back and forth between Maschine+ and Maschine
Hi there Machine+ experts … I'm part of an EDM outfit and we practice live at a rehearsal studio so I regularly need to move projects back and forth between the M2 software and my standalone Maschine+. The sad truth is that although you can move files project files to and from a host via Storage mode, that alone isn't…
-
Using Maschine MK3 or Maschine Plus as a Dawless Performance Setup
I'm interested in using the Maschine MK3 as a DAWless live setup for performing long and extensive house or techno sets. Typically, this is done using Ableton Live with a Launchpad and LaunchKontrol XL. However, I want to see if a similar setup can be achieved with the Maschine MK3. I got the idea after watching Native…
-
Maschine Plus Stuck at start-up
Does any one have any solution to this? This happens to me after installing the new update. I tried the one with .nut file downloading to the root directory of the sd card but didnt do anything..
-
Machine Plus connecting question
hi i recently bought machine + i own my imac /apollo tiwn mk2/ genelec 8030c so my question is my imac apollo genelc is hooked together fine and i want to use my maschine plus together the way i want is i want to use machine plus standalone but i want to connect to speaker also while speaker can have input of my machine…
-
NimBank Tool Release - Custom User Library
NimBank is an open source tool to custom the Maschine user library (modify name, add bank, sub-bank, ... ) You can find the v4 release here : https://denivel.blogspot.com/2023/01/nimbank-tool-update-40.html And a tutorial here : https://denivel.blogspot.com/2016/03/add-product-and-bank-to-your-own-librar.html Enjoy...
-
Error "FM8 could not be loaded on Maschine+", anything I can do about it?
As the title says, trying to load any sound from FM8 and I get this error "FM8 could not be loaded". I can pre-hear the samples but when I press the "LOAD" button, the error pops up. I did a quick search but didn't find anything specific on this error for Maschine+. Anyone can help with this? System Version: 1.5.1.0…