-
Problem Komplete Audio 6 driver installation
Hello everyone. I have a strange problem. I make install drivers for Komplete Audio 6 on my new PC Windows 10. Drivers was download from NI Support site. Windows says: can't install this drivers. I used all possible variations: under administrator and user role, auto search drivers on PC and manual selection. No result.…
-
Komplete Audio 6 MK2 doesn't output sound via Studio display
There is no sound when audio from a laptop (recording instruments works) is sent to Komplete Audio 6 MK2 and connected via Apple Studio display. It does work when I connect directly to macbook, or even if I connect to a USB hub. I have also tried connecting Komplete Audio to a powered USB hub and then to Apple display, but…
-
Komplete Audio 6 MK2 - Monitor/cue on Ch. 3/4
Haven't been able to monitor cue on channel 3/4, just on the main ones 1/2, is it even possible to do that? so that I can have the cue on my headphones and not coming out of the speakers?
-
Cue functionality with Komplete Audio 6...?
The question is, can the KA6 be configured to hear a cue track in Ableton 11? The aim is to hear the metronome in one channel only, or be able to cue in a track that the audience can not hear. I have experimented with different outputs to Cue Out and Master Out in Ableton's master track mixer, along with different switch…
-
Tips: Fix for getting input 3/4 audio to Main Output - Komplete Audio 6
Hi, I was having an issue with getting the sound of my 3/4 inputs to go out of the Main Output 1/2. Found a fix for anyone looking to be able to hear say a synth, etc. they may have routed into 3/4 inputs. You don't need to go through these loopholes of having to have your DAW open and doing routing like some others have…
-
M1 traktor obs blackhole connectivity
Hi all, Like many other people I would like to go live streaming. For the last few days I am trying to sort this out without success. I know that this issue has been mentioned quite a few times before and I have read many posts but there are details on my settings that I haven't found. System: M1 MacBook Air (Monterey)…
-
Komplete Audio 6 MK2 - No WDM driver for windows Sounds?
Just upgraded to the Komplete Audio 6 MK2 from the Komplete Audio 6 MK1 The MK 1 had multi driver support, as in, when the asio is in use with your DAW the windows audio i.e. Playing YouTube would still come through using WDM driver. so no need to check that both DAW and windows audio are at the same Bit rate 44.1k vs 48k…
-
KOMPLETE AUDIO 6 3/4 INPUTS
Hi guys, I just recently bought this new interface mkii, so im kind of curious if someone has managed to use the 3/4 inputs with instruments (guitars, synths) correctly. Since these inputs were desgined to work with balanced signals, i think it will need a DI BOX to operate correctly? But the fact is most DI boxes outputs…
-
Can I setup Komplete Audio 6 like Audio 2 DJ?
All I really need is Audio 2 DJ, but what I have is a Komplete Audio 6 (original version). I just want to connect my Kontrol X1 to my laptop, run my laptop out to soundcard then via two separate stereo channels to my external DJ mixer. It would seem like this should be easy, perhaps it is, but I've been search all of the…
-
Komplete Audio 6 mkII disconnect issue (PC)
I use Komplete Audio 6 mkII on Windows 10 and MacOS. The problem that i met is on Windows only, there's no such an issue on my Macbook Air M1. When i turn on my PC and playing some audio or video on Youtube, KA6 mkII doesn't produce any sound. At this point, YouTube shows a download ring icon on the video, such as happens…
-
Firmware issues - hardware not recognized
I trying to get my firmware to be recognize my hardware but my audio is fine as you can see ,but my komplete kontrol Mk2 and Machine mk3 is not being seen. The serial # or installed firmware is not being recognized . How can i fix this , I,m working with Catilina Os. If you have any suggestions I,m open ears. I can use the…
-
Komplete Audio 6 inputs and outputs, balanced or unbalanced?
Hi there, I'm considering buying a NI Komplete Audio 6, but having trouble finding information on whether the line inputs and outputs are balanced or unbalanced. Inputs 1 & 2 are multi inputs, (XLR & 1/4" jack), if I use a TRS cable for the 1/4" jack inputs on the front for a line input, are they balanced or unbalanced? Do…
-
Komplete Audio 6 Midi problem
MIDI PROBLEM I have a Komplete audio 6 audio card. When I connect my keyboard (Kawai CL 36) via midi (yes i connect it the right way) the card lights up green but I have no midi signal. Any idea what the problem is?
-
Komplete Audio 6 Mk. 2 - can inputs be changed to mono in Windows?
Hi, I tried searching the forum and the internet, but to no avail. I have encountered a very common issue with audio interfaces, that my XLR microphone input is only recorded on the left channel. The usual fix would be to change the input settings to mono instead of 2 channels, but it seems that the Komplete Audio 6 Mk. 2…
-
Routing sound on the KA6 mk2
Can I route the sound coming from my DJ equipment to input 3 & 4 to come out my main out 1 & 2 without having to open any program like I used to do on the Komplete Audio 6 mk1?