-
cdj3000 + T4 on a M4... Can't connect?!
I'm at a club where I played dozens of times with my 2014 macbook air with Traktor 3 and the clubs CDJ 3000 no problem. Today I brought my M4 with Traktor 4.1.1. 23.. and the CDJs don't connect! tried the T3 on it and still no go! is this an M4 thing?! I got both computers, and the old one can connect and the new one…
-
Traktor compatibility with Apple M4 chips & CDJ 3000
I recently bought an Apple MBP M4 Pro laptop. I noticed on the Traktor 4 System Requirements page that the M4 chips haven't been listed as compatible. Could that be the case? I usually connect directly to 2x Pioneer CDJ-3000s, and use the Pioneer Aggregator. Has anyone tested this set-up, and does it work ok?
-
Audio tracks
Why don't the audio tracks on Traktor Pro 4 appear as they do in the Windows folder?
-
Howto unset Beatgrid and "Flag" Markers
In the attached screenshot, i. On the left "song board", there are eight boxes below the waveform with labels numbered 1 through 8. Number 1 is gray, and 2 to 8 are blue. What are these? How do I unset an already blue-highlighted box? ii. On the right "song board", when the song was playing and got to about halfway, I…
-
S8: Can I remap pads 1 through 4 in loop mode to beatjumps?
I don't really use the top row of pads when in loop mode, so I'd like to remap them to beatjumps so I can use all 8 pad to jump back and forwards (1, 4, 16 and 32 beats at a time). Does anyone know if this is possible? Thanks in advance.
-
Traktor - CDJ 3000X Compatibility when ?
This is urgent for many users, Please tell us if and when CDJ 3000X compatibility with traktor will be ready ? Thank you
-
Controller Mannager
I recently switched from TK MK3 to TK MX2. I had programmed additional or different functions for 14 controls on the MK3. I was pleased to discover that the MX2 now offers many of these functions right out of the box, and with even more convenient access. However, there are still four functions left that I wanted to…
-
jog wheel (TT mode) doesn't stop at the end of the track & Soft Takeover (Pioneer function)
Hi everyone, I recently bought a used S4 MK3 and I'm using Traktor Pro 4. I have two questions and would be grateful if you could answer them: The jog wheel (TT mode) doesn't stop at the end of the track on my Traktor S4 MK3. Is that normal? If not, how can I fix it? Soft Takeover (Pioneer function) only works with the…
-
When will there be a deck saver for the MX 2?
When will there be a deck saver for the MX 2?
-
transfer old email to new one
i can't get any response from native instruments. i have tried to transfer the license from my traktor pro3 that i have sold with traktor S4 mk3. my original email is not accessible and i cannot change to my new email, please help. regards
-
CDJ 3000 HID mode CUE points are wrong on the CDJ screen
I use the CDJ 3000 in HID to control Traktor Pro 4.3 On regular basis the cue points on the cdj 3000 screen are not correct. - Somethimes they are correct on the waveform but uncorrect in the preview - Somethimes they are not showing on the waveform, after loading an other song a the song with troubles again. The cue…
-
Driver installation failed
Hello, I recently purchased a Traktor Kontrol S4 MK2. I have a M1 MacBook Pro with Sequoia 15.7, and Traktor Pro 4 installed. When I plug in the console, the red USB LED flashes, and the Mac recognizes it as a USB device but not as a MIDI device. I tried downloading the latest drivers from the Native website, but when I…
-
I don't know why, but the pre-listening was going to the master output and to the disco speakers
Good morning, Something very wrong happened last weekend. I don't know why, but the pre-listening was going to the master output and to the disco speakers. After selecting the song for the deck, with the deck fader all the way down, even a simple press of the hotcue pad to position the song where I wanted, I could hear the…
-
4.4.2 Effects Parameters Resetting
Effects parameters reset to default values when changing layouts (Essential, Extended, Mixer, etc)
-
will an s4 mk2 work with my m2 macbook air on the newest os
im looking to buy a traktor s4 mk2 as i bought an s2 off ebay but was sold a broken one and ripped off by the seller and ebay when i clearly showed it arrived in pieces but apart from that the left jog wheel wasnt funchtional at all. the unit is a mk2 and it does work but before i spend my money i need a straight answer…
-
Upgrading Traktor 3.4.2 to Traktor 4.0
I have a old iMac that is running Traktor 3.4.2 and all my music is located on the computer. Recently purchased new Traktor MX 2 and installed Traktor 4.0 on MacBook Pro laptop. Having problems getting all my music files from old iMac to the MackBook Pro laptop. The problem is the old iMac is not compatable with the new…
-
Traktor Pro 4 - Blurry Waves and sotfware freezed
Hello. I'm posting here a problem tthat affects me sometimes during my sets using Traktor Pro 4, with S4 MK3, Traktor F1 and a another MIDI controller. Using frequently 2 track desks and one remix deck. Randomly the waveform of some of the tracks became blurry and at this moment, the track stops inmediatly. You can start…
-
How Do I Get Two Turntables (and Pioneer 250MK2) To Work In Traktor Pro 4
I had Traktor Pro 4 working for digital tracks with my Pioneer 250MK2 mixer, and am now wanting to record a strictly vinyl set… even with much research, I'm not getting a reaction in the Live Recording area in Traktor from both turntables. Pioneer 250-MK2 already has a pre-amp, and I have both decks set to Phono on the…
-
Which is the right controller?
Hello Native Instruments friends. I have a fairly old MacBook with Catalina and Traktor Pro 3. It works perfectly for DJing with vinyl, but I wanted to get a controller. I recently bought a used one, the S2 MK2, and I had problems with it. The buttons worked perfectly, but it couldn't produce any sound through either the…
-
Kontrol S4 MK3 lights out on pads and buttons on left deck and top row
My Traktor Kontrol S4 MK3 button lights (LED) went out on the left deck, like the pad lights, FX lights, line I/O, and the two left channel-out meters, nav buttons, etc.…. I put the controller in "Vegas Mode" (no computer/software connected "demo mode") which is essentially a basic hardware check/test mode, and no change,…
