-
TP / Traktor Kontrol S4 MK3: How to map Phono Turntables to C & D channels?
Hi, By default, phono inputs are set to channels A & B which are the default channels for the digital tracks. This is highly inconvenient as it doesn't seem possible to hide A & B channels in Traktor Pro as it takes screen real estate. My apologies in advance as I haven't tested things further. In order to map the phono…
-
Z1MK2 Issues
Hi, I cant seem to get my Z1 working properly: I have a win 10 PC with a Creative Blaster sound card connected to a 3 piece speaker setup via SPDIF out. I have the Z1MK2 USB connected to a USB 2.0 port and the 3.5 to the line in on the creative (have tested with both 3.5 and phono) PC audio is set to SPDIF out Audio…
-
TRAKTOR KONTROL S2 OUTPOUTS ONLY LEFT FROM BOTH LEFT AND RIGHT!
i have a problem with my S4 last week was playing all ok. And today I noticed only the left main output working in both rca and plug. Traktor mixer output works fine, just when controller is connected. Please Help!
-
Traktor Pro 4.1 Trial page not updated
Hi, The title says it all. The page to download the trial version of Traktor Pro is not updated to 4.1 DJ Software : Traktor Pro 4 : Free Trial | Traktor it's still 4.0.2 When will the update be available for trial?
-
Jog wheel of S2 MK3 not scratching while playing in "Scratch" Jog mode
Hi, I have tried all the recommended steps by NI support, i.e. to install latest firmware of Kontrol S2 MK3, and also to adjust sensitivity. Both did not bring a solution to my problem. Thanks for sharing your experience. Thx George
-
How do I request a refund ???
I just purchased Traktor Pro 4, would like a refund as I won't be using it. It's impossible to find any information on this website on this.
-
Official update status - Traktor Pro 4 (current version: 4.2.0)
This thread provides information about upcoming patches for Traktor Pro 4. It will be updated whenever new information becomes available. --------- The currently available software version is 4.2.0. Please make sure that your installation is up to date. --------- 4.2.0 2025-04-24 ADDED Z1 MK2 user mappability You can now…
-
Preview mode Traktor 3.11 with S4 mk2 seek issue
When im in preview mode on my S4 mk2, when i rotate the browser knob it doesnt seek through track as stated in the manual, it continues to seek through browser tree ? Any ideas ?
-
Traktor Stems: Is sum of all four tracks *identical* to stereo version?
I've been doing some comparisons between a 3rd party stem creation tool and Traktor's new built-in stem tool. Something that caught my attention with this other tool is that they claim that when their drums+bass+other+vocal tracks are played together, the resulting sum is bit-for-bit exactly the same as the original stereo…
-
More than one page for Browser Selection !
Not sure if this is the right place for requests ? But it would be amazing to be able to open two different playlists at the same time and load from either
-
Shift and move encoder not performing how should S4 mk2 zoom waveform
On my S4 mk2 the shift plus move encoder is not zooming the waveform as stated in the manual Any ideas ?
-
Freeze mode behaviour on TP4 vs TP3
I'm using the exact same mapping on both TP4 and TP3 for activating freeze mode with loops. On TP4 the mapping does not work and starts behaving erratically, on TP3 it works exactly as intended. I think I should raise a ticket for this, unless someone has any bright ideas? Also - if some can send me the link to raise a…
-
Broadcast feature still not working in Traktor 4.1
I use Traktor's Broadcast feature to send track metadata to Now Playing via localhost. Since I updated to macOS 15, broadcasting no longer works. I was hoping it would be fixed with v4.1, but no. I believe the problems is due to the new LocalNetwork permission. Now that Traktor is "fully compatible" with macOS 15, has this…
-
Traktor S4 MK3 Pitch
Hello, I already made a request a few years ago because of the ability to change the pitch in tt mode. Right now if it is needed I switch to jog mode (which has a higher pitch setted) adjust the pitch and go again back to tt mode. This is working but a dirty workaround. So please it would be so great to change the pitch to…
-
Looking for hardware solution
Hi, I need some help, I'm a beginner. I have Native Instruments Traktor Kontrol S3, one Mac Studio M2 Ultra and one pair of Yamaha HS7 MP. I looking for a solution to connect Mac with speakers and Traktor console, also when I'm not using console to use speakers with Mac for audio experience, not speakers built in Apple…
-
Jumps in songs
There is a jump in the songs. I am connected with a Pioneer A9 mixer and D2 remotes and every now and then there is a jump in the song. Is it related to the operating system I am working on? I downgraded the software from 3.8 to 3.4 and still have the same problem. I would appreciate an answer. Thank you very much
-
Unable to register secondhand hardware in Native Access
I recently bought a Traktor Kontrol Z2 from Musicorp, which rent hardware which you can buy as ex rental (normally only 6 months old). The product was near new and came with all parts, vinyl control and cd's etc… and is in perfect condition no scratches or sign of use. When I try and register the serial it notes it is…
-
I need your opinions about fanless MacBook Air models
Hello everyone! I have been using my Macbook Air '18 with Traktor 3 for several years now without any noticeable problems. Before that i have been using Macbook Air '13 with 4GB RAM also without any issues. I am planning to replace my laptop with a model with an M1 or M2 chip. I need an opinion on how these models behave…
-
Has rhe traktor kontrol 3 an Virtual In
Like literally ?
-
Traktor Pro 4.1.1 available via Native Access
Just opened Native Access on my MBP and got offered to install Traktor Pro 4.1.1 released today. Didn't find an official note on that yet.