-
MASCHINE MK3 TRANSPORT
How do I get the transport section of Maschine MK3 to work within Ableton 12 (transports work fine in standalone but not working when opened within Ableton) I have the Maschine 2 plugin. Looking at the Control Surface section of Ableton and there is well over 100 controllers in there, but nothing that says Maschine MK3. I…
-
Is there a way to change time signature for a scene ?
I have a song mostly in 4/4 but a chorus includes a 5/4 bar. I can isolate this bar in a specific scene but I don't find a way to change the time signature of a scene. This is a feature available in all the other DAW products I use, and without it I cannot use my Maschine Plus for this song. Thanks.
-
convertir format H2 et format HDP en format mrpj
Hello everyone, I wanted to open my old compositions, but the files I saved back then were in H2 and HDP formats, so I can't open them. Does anyone have any ideas or know of a converter? Thank you very much for your help.
-
Are there any good Maschine Youtube videos that deal exclusively with the software
Maschine continues to kick my butt. If I search for answers to software issues I only find hardware answers. For example it took me two years, literally, to finally figure out how to solo one of the 16 tracks in a kit. All this time I've had to mute and un mute the other tracks, because no amount of searching would give me…
-
Surface pro 7 & Xreal & Maschine software experiences ....
I've been patiently waiting for a portable Windows solution to become affordable! i've just a few days ago purchased a second hand surface pro 7… to see how much milage i can get out of it, using maschine software and hardware combo's now im aware laptops being the typical, portable solution for windows… and they are quite…
-
About play series on maschine+ 2.1.0
I'm trying to understand what it means to have the Play Series on Maschine + in Standalone mode... For instruments like Empire Breaks, where the content is primarily focused on kit e loop drums, what you can have in Standalone mode is in Keyboard mode: From C1 onwards, the pads with 16 drum samples from the specific…
-
MK2 not recognizing certain button presses
I have an issue with my MK2 not recognizing specific groups of buttons. Specifically, all buttons under the master, groups, transport, and all the shortcut keys under the pads section like scene, pattern, solo etc. Ironically all the pads work fine, and i can use the navigation to load kits and sounds and trigger playback…
-
Maschine 3 stems control
I just installed Maschine 3, and I’m having trouble controlling stems I’ve separated from a track. If I click on a stem (or the original track), it will begin playing, but it will not stop. It doesn’t respond to the space bar key command as a start/stop control, and there’s no obvious play/stop buttons. Clicking the other…
-
Command/CTRL + Up/down to Zoom in??
Hi there I've been using Maschine SW and HW for years but with the new update Maschine 3 still upset about how SW is developted… My feeling is Native Instrument SW never take feedback from other sw like Ableton…and "Zoom In" is a point. Why not allow users to Zoom in/out like Ableton using Mouse+CTRL ? Who use CTRL+Up/DOWN…
-
MK3 Mikro as midicontroler in Cubase
Hi I'm trying to record drums with Maschine MK3 micro in Cubase. I'm following the instructions to select manual output, and switch to Midi on the mk3. I can press play, but I don't hear any sound when I play the drum pads, and there's no recording in Cubase. Is there a step by step video?
-
How to send transport messages to Maschine from Live
I have Maschine 3 running as a plugin in Abelton Live 12. Is there any way I can I can force Maschine to start playback from the beginning of the measure, independent of where I'm at in the arrangement in Ableton? Asking because sometimes I like to start a new measure "off grid," and I want Maschine to start playback from…
-
Rotary encoder values when using Maschine MK3 as MIDI controller with Cubase 14
I've started using Maschine MK3 via MIDI Remote in Cubase Pro 14 to control some parameters. It is working OK but the displays on Maschine don't reflect the values in Cubase. For eample, I'm using a rotary encoder to set the pre gain. I set the value in Cubase to -6.4db but the display in the screen above the encoder says…
-
after restarting my M+ stand alone got stuck at restarting.
hi, i tried to update and everything seemed ok, but after restarting my stand alone got stuck at restarting. These files are on my sd card now does this seem ok to you?🤔
-
how to route external effects pedal
I just got a JHS color box and wanted to route my drum pad through it using the headphone out as 3 and 4, my question is can route the through the mic in and not use 1 and 2 I have turntables on the right and left in on the unit?
-
Guitar Rig Plugins for Guitar Rig users: Give the people what they paid for
With all the great improvements that came along the latest update of Maschine+ I also had to find out that the Guitar Rig Effects TAPE, KOLOR and PSYCHDELAY are only integrated for owners of the standalone Plugins and not for owners of Guitar Rig 7. I'm usually not the kind of person ranting in forums, but this - as it is…
-
Maschine + 2.1 update failed
During the update of Maschine Plus 2.1, it will no longer start. It stays stuck on the Maschine + is starting screen. No matter how many times I start it, it stays on the start screen. It doesn't work even if I remove and insert the SD card. Even if I prepare an SD card with "system-reset-v2.nut" and try it, it will not…
-
Maschine+ assign play series drum kits to play using the pads
Newbie here - I see that I can now load up some play series instruments on the Maschine+. When I load up say an Empire Breaks kit, it doesn't load the individual kit parts onto pads (like it would if you load a group from an expansion pack) is there any way to do this so I can finger drum? thanks
-
Maschine is on crash mode!
In my last session Maschine crashed 3-4 times. I had to jump through hoops to the project I was working on. Currently it crashed twice. What seems to trigger it is when I press "shift+play+rec".
-
Possibility to downgrade Maschine 3 software to 3.3.1
Hi, Is it possible to downgrade to 3.3.1 ? Since the 3.4 update isn't working on my PC, and it's been over a day without an answer to the potential problem. Thks in advance for your answer
-
After 3.4 update, an updated project fails to load on Maschine+
I have just updated Maschine software to 3.4 on my Mac and now use it to interface with my Maschine+ box. Before that, I was using Maschine 2 to build projects. I updated one project which works fine on 3.4. But when I push it to the Maschine+, I get the message "Loading project failed". I have tried to remove the files…
