-
Logic 11 keeps crashiong after update og Kontrol mk3
Hello . Just updated the Kontrol MK3 with the new update and now my Logic Pro keep crashing . Definetely wasnt before the update Running Mac OS Ventura .
-
Kontrol S88 MK3 can be used to control hardware synths without computer connection?
Without either the synth or Kontrol being connected to a computer, can the Kontrol act as a normal MIDI controller for the hardware synth? I'm thinking of buying the Kontrol but I would like definite confirmation of this point first.
-
Kontakt doesn't respond to expression pedal while Cinesamples do on MK3
Hi All, Just booted up a new S88 MK3. The expression pedal work fine with my Cinesamples but won't register with my Kontakt sounds. Any ideas? Thanks, Tom
-
Komplete Kontrol S61 MK3
I can not activate my new purchased S61 MK3. Before i used the MK1 version. I already updated the Native Acces, Upgraded the firmware of MK3. But when i try to register, its says " the serial already registered". In my products list i don't see the MK3 back. Also in Native Acces i miss the Harware Connection Service. What…
-
Kontrol S MK3 won't boot up
I've got a used Kontrol S49 MK3. First I couldn't register the serial number because of the dreaded "already registered to another user" message. NI tech support took care of that in a hurry for me! (Thanks NI tech guys, you rock and roll!) Then it still wouldn't register, I would put the serial number in Native Access and…
-
How Can I Downgrade the Driver and Firmware of My Kontrol S88 MK3 on Windows?
The firmware version before the update was 1.5.7
-
Logic Pro X crashes with new Kontrol S61 Mk3 - Constantly
I wonder if anyone else is experiencing this: Installed S61 Mk3 s/w and registered, upgraded firmware etc etc Create new empty template in logic Load Kontakt 7 as the instrument - nothing else Load something - say Omnia, Arkhis - crashes Logic every time If I load the same patch into Komplete Kontrol no crash and…
-
Pedals with Komplete Kontrol 3.3.1 cannot be changed separately
On the newest version of komplete kontrol 3.3.1 i have the problem that i cannot use sustain pedal and expression at the same time (pedal a and b) with a S61 mk2. i have a sustain pedal in pedal a configured to switch . when i change to pedal b for continous controller configuration pedal a is continious too . It seems…
-
I get weird audio artifacts when using the NI pianos
So basically I get a weird audio artifact and the piano sustain breaks when exporting tracks with the NI pianos (Noir, Maverick, Grandeur etc.). This does not occur with any other instrument except the pianos. Has anyone encountered this issue before and knows how to solve it? Here's an example:
-
Plug in and controller not found in Pro Tools
This discussion was created from comments split from: Re: Komplete Kontrol ScanApp crashes.
-
Kontrol S61 MK3 MIDI OUT CHANNEL
I can't seem to find a way to change the MIDI OUT channel, can someone please help? This seems like the most basic of setting, can't believe how hard this is.
-
Rob Papen NKS questions
This discussion was created from comments split from: NKS User Library Index.
-
No sounds from new mk3
Today I tried to install my new mk3 keyboard. Because my computer has no USB C port, it seems to be difficult. First the display showed "low power". I had a power supply with both USB C and A. I used a cable with USB A on the power supply and USB C on the keyboard. That doesn't work. So I changed the cable to USB C on both…
-
Seamless Integration of Kontact Libraries into Komplete Kontrol
NI needs to integrate Kontakt library management into KK. Right now it's a mess, having to open files, drag and drop stuff just to get access to the library with key lights. And forget about being able to navigate to a Kontact-oriented library from the S88 dashboard! The only way this seems to integrate is at the DAW…
-
How much longer for MIDI Templates?
Hi, Any updates on MIDI Templates? Any news at all would be appreciated. I know it's likely I've missed something, somewhere.
-
Macros are buggy...
if I want to a assign a macro on a parameter that already is a macro (let's say on page 2 f.e.) the macro that already existed just disappears and can't be used for a different macro. The slot stays blank. this is really frustrating! I want to be able to assign a macro to the same parameter on different macro pages. Also…
-
Komplete Kontrol 3.0 upgrade has reset all instances
Hey Folks, After updarding to Komplete Kontrol version 3 I've lost all previous configurations. For example where previously I had configurations of "Session Guitarist" or "Massive" with settings I had tweaked, Komplete Kontrol is now loading up with the default page and no instruments loaded. Sure this is my fault for not…
-
Komplete Kontrol S25 & Komplete Kontrol software
I've got the S25 working great with Logic and running various NI instruments, but when I run KK software it doesn't see my keyboard and I can't browse or do anything. In the menu for controller, everything is grayed out. I'm running version 3.2.1
-
Canot control the patches and browser with Komplete Kontrol S61 MK2
Hello, since the last update in Native Access, i can't anymore control the Komplete koontrol software with my keyboard. the buttons Browser and plugins are not active. same issue with the little keyboard Komplete control A32 Can someone help me please ?
-
KKMKIII mac silicon issue again again and more again
From the Two last komplet kontrol update . It's getting worse !!!!!! No sustain (CC 64 is overited from another CC on the 3 pedals !!!!!!!!! From the last update no vst browser on komplet kontrol mkiii hardware screen. only midi windows. !!!!!!!!!!!! issue on volume pedal must be calibrate alway in invers ! no midi on midi…