-
I can't use all the features of my Kontrol S88 MK3
I think I didn't install the latest drivers for the kontrol s888 mk3. I noticed that the buttons to control the DAW don't light up when I'm on Ableton Live or FL Studio (play, loop, record, DAW...etc). There are options I don't see in the MIDI settings. To explain it to you better. In the MIDI settings I should see this:…
-
M32 Factory Reset?
My M32 has started constantly sending MIDI CC data for a couple of it's knobs. I'm not sure if this is a hardware issue or something else so I want to do a Factory Reset on the device to see if this makes any difference. I can't find any information anywhere on how to do this (if indeed it's possible). Does anyone know -…
-
Komplete Kontrol changes Instrument when changing preset with keyboard
Hey guys, when trying to use KK Version 3.3.3 with my KK S61 mkII I run into the following issue: Open KK Browse to an instrument on KK S61 mkII (e.g. Analog Dreams) Select an Analog Dreams preset on KK S61 mkII Switch to the next preset on KK S61 mkII Switch to Browser and select another instrument on KK S61 mkII (e.g.…
-
NKS 2.0 - a running list of compatible content
I thought it might be interesting for folks to keep track of content as it's updated for NKS 2.0 As of now, the current list is: Action Strings 2 Action Woodwinds Ashlight Cremona Quartet: Guarneri Violin Cremona Quartet: Amati Viola Cremona Quartet: Stradivari Cello Cremona Quartet: Stradivari Violin Crosstalk Piano…
-
Arturia Pigments stuttering
Hi! I am having the issues discussed here : https://community.native-instruments.com/discussion/28043/pigments-encoders-jumping-and-stuttering-values-when-used-through-komplete-kontrol?utm_source=community-search&utm_medium=organic-search&utm_term=pigments+ In short, Pigments work fine as regular VST3, but in KK in my DAW…
-
Kontrol S61 MK3 stuck on Welcome screen after factory reset
After doing a factory reset on Kontrol MK3 S61 it's now stuck on Welcome screen. I did a factory reset because an expression pedal stopped working. The Kontrol firmware updater says I have the latest update (1.8.7). If I remember correctly when I initially installed the key board it required updating to 1.8.7 and after the…
-
Can I use a MIDI template to control an instrument inside of Kontrol?
Hi, I load a VST that already has an NKS template. I can use it with my MK3 normally. I setup a MIDI template but cannot map the controls to the Kontrol Instance. I'm trying to control the "Time" parameter in the top left that you see moving when NKS mode is enabled. The reason why I want to do this is because, this…
-
KK3: let's talk about Preset Edit and View improvements
This thread is intended to discuss Preset Edit and View Capabilities - which is one of the next topics we're focused on. So far, the list of things I'm aware need to be addressed includes: The ability to delete user presets from within Komplete Kontrol The ability to edit properties for user presets The ability to edit…
-
NI TOTAL FAIL: MacOs 15.3, MacBook Pro M4 Max
NO software instruments associated with NKI "ecosphere" are functional on my Komplete Kontrol S88 Mk2. NONE of my investments in NI virtual instruments are functional. What a WASTE of $$$. ALL virtual instruments bought from other suppliers are functional. NI is the ONLY FAIL. AND IT IS TOTAL.
-
What Breath controllers works with Kontrol MK3 ?
Hi ! What are the breath controllers that work with Komplete MK3? Thanks in advance, Facci
-
Can't load Play Series Selection older version on old DAW project
Hey! An old project containing an older version of the Play Series Selection can't load that library because the project was made with that older version, that now is not present in my computer. I know this thing happened to other people usinng other libraries, so I tried dowloading older versions of the libraries that…
-
Ni mashine mk3 & keyboard no display working
I up graded to mashine 3.0 . Now the ni mashine mk3 will not connect and the display screen stop working. On both device komplete 49 a- ni mashine mk3 . Both devices are up to date . I’m Using a powered usb hub . I need help to resolve this issue .
-
Konplete Start
Hello. I have Komplete Kontrol 15 Standard. Do I also have to have Komplete Start? Bw, TK
-
How to Pin the browser when auditioning sounds on MK3 ( Komplete Kontrol )
Hi, I just picked up a s88 mk3 , and so much has changed since my KK MK2.Anyways, I'm just trying to figure out the most basic option on how to browse sounds and audition sounds, so I can start creating my favorites..I'm using Komplete Kontrol 3.3 latest version How do we pin the browser on the MK3 Hardware, in order to…
-
Purchase January 25, 2025 - Delivery speed estimate ?
Hello. I purchased 15 mk3 and kcomplete products on January 25, 2025, and I would like to inquire about the delivery period. Usually, you have to contact the headquarters As you know, I'm inquiring because I'm frustrated because the headquarters' response is too slow. I wonder how long the delivery period is for other…
-
No Touch Strip Control on Komplete Kontrol Mk3
Is there a reason the touch strip options got removed or are they there and hidden? There seems to be no way to control the snap back of the strip's position.
-
Avid Pro Tools + Komplete Kontrol MIDI Controller not working
Hi guys, I recently received my NI Kontrol S88 MK3. I now want to setup my Pro Tools (2024.10), but it's not working as it should. When going to Peripherals > MIDI Controllers, I select "KompleteKontrol". Then it should automatically select the receiver and sender. This isn't the case. Also, when selecting "KONTROL S88 MK"…
-
Dynamics in symphonic VST's defaulting to lowest volume after every playback.
I have to like manually turn up the dynamics again after every playback. Since it's defaulting back to lowest dynamics. So annoying. Hasn't been like this before. Instruments almost inaudible after every playback. How can I fix this? Happens in Komplete Kontrol in latest Logic on Mac.
-
I'm trying to use a KK s49 MK2 in logic pro and having issues
I just got a brand new M4 mac mini and got logic installed and ready to go. I then downloaded Native access and Komplete Kontrol to use with my board. Once I had everything downloaded and scanned I tried to use the vst and i'm getting "plugin not found" when I try and use any of them. I'm running Sequoia 15.2 so Idk if the…
-
M32 transfer
Do anybody know any contact details to NI where a used M32 can be released from a former account ? I am REALLY tired of wasting time on useless robotarticles, so hopefully there are still humans in the supportteam somewhere … 😉 A wellknown tool as a oldschool e-mail to someone would be awesome Cheers