Help, Learn and Connect

Recent discussions

Avid Link install of ProTools Intro+ doesn't successfully install and launch software . . .
I believe in my initial effort to download Pro Tools Intro + for Focusrite, my Native Instrument app was subsequently opened and is likely disrupting a successful installation of Avid's Pro Tools software. How should I address and subsequently fix the following error message (in hopes of resolving my download issue)?!?:…
NI Form in KK - Issue with recording automation in Pro Tools
Hi, I'm using NI Form plugin (version 1.1) (I guess this is classified as a Reaktor plugin) inside plugin Komplete Kontrol 2.9.4 in Pro Tools Artist version 2023.6.0 (and I’m in Rosetta mode) on a MacBook Pro M1 chip Ventura 13.4.1 and I'm having issues with automating Form inside the Komplete Kontrol plugin. I want to use…
Avid Pro Tools + Komplete Kontrol MIDI Controller not working
Hi guys, I recently received my NI Kontrol S88 MK3. I now want to setup my Pro Tools (2024.10), but it's not working as it should. When going to Peripherals > MIDI Controllers, I select "KompleteKontrol". Then it should automatically select the receiver and sender. This isn't the case. Also, when selecting "KONTROL S88 MK"…
DAW Integration Not Working (Mac Sonoma; ProTools 2024.3.1; Komplete Kontrol S61 MK3)
Hello! I'm brand new here - hope you're all well. I just unpacked my S61 and tried to connect it with my protools; I was dismayed to find that the 'transport' buttons don't work (i.e. play, rec, stop, etc.). Plus even though I've mapped the device in my DAW, it sends me this message (attached) every time I open the…
Komplete Kontrol integration in Pro Tools only partially works
Hi folks, after getting everything installed, which was quite a nightmare because of out security infrastructure, the S88 and Maschine runs. Since I'm working with Protools, I followed the steps as the shown is various videos on Youtube. However, it begins that when selecting Komplete Kontrol in…
Native Instrument in Andalucía, Spain.
Hi, I am moving to Spain, near Marbella/ Malaga next year, and was wondering where I could meet other producers/ Dj like me in the area. I’m using Logic, Ableton, pro Tools and Nuendo. So I'm fairly flexible to collaborate. But first, I'd like to connect, then get help to build my own recording studio. Cheers, Sandi 😊
Issue running komplete kontrol from Pro Tools after 2024.10 upgrade, anyone have a solution?
I recently upgraded to Pro Tools 2024.10. I also installed Kontakt 8 Player, and updated all of my Arturia plugins to the latest version. I am running the latest version of Komplete Kontrol (v 3.3.3). If I launch the stand alone version of Komplete Kontrol I am able to load and play the Arturia V series plugins without a…
Maschine Mk3 controller hardware not responding
I can make everything work via my 2019 MacBook Pro i9 64GB RAM/Ventura, but none of the touch pads/rotary encoders/buttons or ribbon on my Maschine Mk 3 unit are responding. I've tried shift/MIDI (saw that posted as a solution), but it stays in PLUG-IN Instance mode. Native access informs all my software is current. This…
Libraries missing after kontakt 8 upgrade, using Pro Tools.
Less than half the libraries show up and the nothing seems to work. When I click on a library, no window shows up with the contents. any help is appreciated. thanks,
Keep getting interrupted by error messages... [Pro Tools]
At first I tried to ignore them but it's pretty damn impossible when you keep getting them mid-playback or mid-recording. Sometimes I even get multiple errors in a row when pressing play. For example: Pressing "Space" → Error: "Pro Tools ran out of CPU power. Try de-activating or removing Native plugins. (AAE -9173)" →…
Upgraded Reaktor from 5 to 6, AAX plugin not showing up in Pro Tools
I've had Reaktor 5 for a long time (from a very old Komplete bundle), but I decided with the sale to upgrade it to Reaktor 6. I bought the upgrade, opened Native Access, and it installed 'Reaktor 6 Application'. If I look in my Plug-Ins folder for Avid, 'Reaktor 6.aaxplugin' is there, right about the 'Reaktor5.aaxplugin'…
komplete kontrol not loading in protools 2024.6.0
Hello! After upgrading to 14.5 and Pro Tools 2024.6.0 Komplete Kontrol is not loaded as a plugin by Pro Tools, i can only run it in stand-alone mode, Pro Tools says that I need to start it in rosetta mode to work with Komplete Kontrol. Any help is appreciated! Thanks Maurizio
Kontakt 6 and 7 player not showing up in Pro Tools
I've seen this question asked a few places, but none of the solutions I can find seem to work for me. Hoping to get some help specific to my system. I just can't seem to get Kontakt to show up in the Pro Tools plugin list. I'm running Pro Tools Ultimate 2023.9 on MacOS 11.4 with an Intel Core i7. Kontakt 6 and 7 both work…
Maschine x Pro Tools
I’ve seen plenty of videos on routing sounds out of the Maschine plugin, but I’m trying to do the opposite. I need to route multiple Pro Tools tracks into a single instance of the Maschine plugin, which is inserted on an aux track. Specifically, I want to sum four different bus tracks from Pro Tools into four different…
PLEASE ADD !!!! Zoom In/Out knob Shortcut on the MIDIs - PRO TOOLS/FL Stu
I WILL PAY ANYTHING FOR THIS UPDATE!
Brutal crashes PT 2024.6 Sonoma 14.7
I am experiencing significant crashes when using Kontakt 7.9 in Protools 2024.6 Sonoma 14.7 M3 Max 36 GB RAM. Out of nowhere PT will just completely crash usually when editing a kontakt instrument or the midi itself I reached out to Avid and went through their entire process of what they recommend to fix. Still happening.…
Integration in protools
Hello, I bought a brand new Kontrol S49 MK3 and I try to connect it to my protools (2023.9) but it doesn't work (just controlling the sounds in Traktor for example, as any midi conroller…. ;( Is there a solution to do a full integrate solution or not? I'm really afrais that I bought the bad control keyboard. Thank you
KK + ProTools + A25 troobleshooting
Same issue here as I used to have before when Facebook 360 was interfering with KK in ProTools. Issue was fixed. But since I updated some NI instruments and installed iZotope Everything Bundle, Exponential Audio Stratus3D + Symphony3D, Brainworx Creative Mixing Set, and added some new Kontakt instruments (Cycles,…
Playback Delay in ProTools with Kontakt Midi Guitar VSTs
I'm having an issue with midi playback in ProTools. But, not just any midi. When I play, let's say, Keyscape in ProTools, it plays back in time. When I play other Native Kontakt instruments like Session strings or Luke Holland drums, it also plays back in time. However, for some reason when I play "sunburst" or "Mint…
Automation issue: Komplete Kontrol parameters doesn't react to automation
I have an issue with the automation in KK. I use Pro Tools 2021/12 on a macbook pro Late 2014, but i've experienced the same on my MacPro late 2013. Sometimes (Most of the time) the KK parameters doesn't react to automation (and i have enabled automation in PT :-)) then, if I deactivate the plugin, and reactivate it, it…

Sign in to unlock member-only content

New questions

Possible malware?
Hi there, My antivirus has captured some files with names like this one: Drop.Win32.WinDirControlSet.716319, and associated it as being related with Kontak 8 and iZotop installation paths. They are for archives. See the picture. Do you guys no anything about that issue? I'd appreciate your help. Best,
Can I save current set up on Kontrol S61 Mk3 before factory reset?
My MIDI through has simply stopped functioning. I had this problem before, mentioned in an earlier discussion, and the 'answer' resolved as a factory reset. I guess a factory reset will fix it again, but then I'll lose various settings, which is rather annoying. Is there a way to save my current set up before factory reset…
Kontakt Script to change Instrument and keyrange with modulation
This is an interesting problem. I need a script to change Kontakt Instruments depending on keyrange, and the keyrange will dynamically change with modulation CC#1. This is to select which notes along a guitar fretboard are to be played according to fret positions 0 through 17 assigned by mod wheel. One monophonic…
S88 loses Logic
In Logic, when selecting tracks with different instances of Komplete Kontrol, the S88 M2 does not indicate what instrument is active in both the screen and the lighted key indicators. Sometimes it does, but moving track to track they change very slowly and mostly not at all. Is there a solution? Maybe an instruction for…
Abbey Road Drum Libraries MIDI-mapping
Hi, I need a way to use the same MIDI-mapping across the whole range of Abbey Road (and Studio Drummer) Libraries. They all contain the possiblity to save optional mappings, but I can not find a way to use those across the libraries. Attached picture shows how I created my own mapping and saved it, but it does not show up…
Can I export sample loop & release metadata from kontakt 8?
I am sampling a pipe organ and making a VST instrument. I like Kontakt and I would prefer to do it with it. The thing is, I have the chance to give it to a music museum in Barcelona. They have their own sampler there and I need to send them the samples with its loop and release metadata, so we can port it to their…
Kontakt7 libraries viewer is initialized when closed and opened.
I am using FLStudio2024. If I close the window once and reopen it with the STRINGS ENSENMBLE Instrument open, the STRINGS ENSENMBLE in the Libraries is not selected. (It is the first state where nothing is selected). This did not happen when I was using Kontakt5 before, but I wonder if there is a solution to this…
Enabling flux mode in loops
Hi! I have been really enjoying using Traktor Pro for the past two years (version 3 and then later 4). I use it with either mouse/keyboard, or a Numark Mixtrack Pro 3 and a midi mapping file found off the internet and edited to fit my needs. However there is something that has always bugged me about loops and flux mode.…
Modular Icons Sequencer Notes
Correct me if I’m being a dummy, but you can set the key & scale and lock this in the sequencer. Say I did E Minor. When you go to nudge the notes, shouldn’t this be programmed to minor notes only? It’s a music theory question really. For example, you’ve set the seq to e minor, is selecting maj 3rd or all majors make any…