-
D2 Deck focus
I'm using an S4 with 2 x D2's and I'm trying to get the D2's to start (when I open Traktor) with the deck focus (and LCD screen selection) in C (on my left deck) and D (on my right deck) not A and B. They remember being in A or B and restart next time how you last used them, but this doesn't work in C and D. Also is it…
-
Traktor D2 Freeze Mode bug
Since Traktor 4 update, the freeze mode doesn’t work well anymore. The loop at the screen doen’t fit as before (it appears at the left side), and while the chops are still right, if you let the loop playing, the size doesn’t fit so when it comes to the end and starts again, it sounds out of the beat. i guess as long as D2…
-
D2 LED Mapping Trouble
I am attempting to remap the top FX section of a D2 to control FX unit 4 instead of unit 2. The issue im having is when entering browse from the D2, the four buttons LED's go dark and when exiting they go back to mirroring FX unit 2's state until i press them a couple times to reset them. Override factory mapping is…
-
Cant Change D2's with Same Name
I cannot seem to figure out how to create a custom name for my D2's. I have a total of four. two named "Traktor Kontrol D2-1" the other two named "Traktor Kontrol D2-2". The issue im having is when I connect both controllers with the same name I get this error. I cant see any option to create a custom name in the…
-
Issues Custom Mapping D2
Trying to remap just a few simple controls on the D2 has given me more problems than any other midi controller. I am attempting to simply remap the the top four FX knobs to be stem deck filters, and the buttons below them to toggle the stem filters on/off. The issue im having is when entering browse from the D2 screen the…
-
Soft Take Over Not Working on D2
I am using a D2 and remapping some knobs to control multiple parameters using modifiers. The issue im having is direct mode gets the position of the knob perfect but when I enable soft takeover it doesnt detect the full knob movement range. Does anyone know a way to resolve this? Switching the control to relative I have a…
-
Supreme Edition MOD
For those of you who come from the older forum... Welcome to the new forum! 😉 For those of you who don't know what I'm talking about... Welcome to the Native Instruments forum! Before this forum was created, NI used to have another forum (which can still be accessed, but in "read-only" mode), which is where I originally…
-
TP4 can't connect 3x D2??
Had this setup in on TP3 but failed to import my settings.. not sure that would have worked anyways. I've already looked at this post but it did not resolve my issue https://community.native-instruments.com/discussion/41684/4x-d2-controller-1x-traktor-4 So far all I can do is use a two deck setup with the AC/BD…
-
Traktor D2 4 controller setup
I had this working once but haven't tried in a real long time and can't find the info I had back then. I want to use one D2 per Traktor deck (total of 4). Control Editor set them up as D2-1 AC D2-1 BD D-2 AC D2-2 BD Within Traktor you add D-2's in controller manager. The list goes D2 D2-2 D2-3 but I can't get the last deck…
-
DJ Setup with Z1 and D2 controllers
Hello, how would you design a setup for dj-ing with a MacBook Air (traktor software on it), 2 traktor kontrol d2 and one Z1? Amplifier? Speakers? Cabels? Thans a lot
-
Touch sensitive caps supplies
Hi there! I just got a pair of second hand D2 controllers, but they come with DJTT Chroma Caps, which are not touch sensitive, so I can't access to all the functionalities of the devices. I've been looking on google for some replacements, but it looks like there are not third party suppliers of them. Has NI any stock of…
-
Kontrol D2 - Split View Deck A&B mod?
Hi everyone, does anybody know if there is a mod / displaymod for the D2 that allows deck a & b to be displayed in Split view? That would be handy for the use in connection with the Z1. In the manual it says that only the combinations AC and BD are possible but maybe anyone has heard about a mod that makes AB in split view…
-
What A D2 Successor could look like
as Stems in traktor are now fully integrated here's a 'D1' in the style of the x1 mk3, this is my own render and not affiliated with NI from the bottom Bottom buttons are either channel mute or play, cue and bend buttons/rev and flux. If its the latter the bend buttons change colour, red when out of sync Long faders for…
-
What sound card do I need for Traktor Pro 4? (4 Decks)
Hello! I'm currently using AUDIO DJ 8 + DS + Traktor PRO 3. But I've noticed that there is an incompatibility with the sound card I have. My question is; what sound card do I have to buy to be compatible with Traktor Pro 4? I want to use 4 tracks, or 2 timecode vinyls and 2 additional tracks. Thanks
-
QML Mods - On today's menu: Native ButtonGestures (Double-Tap-Hold-Release)
On today's menu: Native ButtonGestures (Double-Tap-Hold-Release) (LINK) Past menu 3: Double-Tap-Hold-Release button (LINK) Past menu 2: Loops of any Size ( LINK ) Past menu 1: Double-Tap buttons (see this post). ... Double-Tap buttons Inspired by Patch & dj_estrela, i decided to publish the basic code i used for all my…