-
Bezier Mirror Overdrive , simle, light, distortion with fat sounds
This is distortion with very simple formula without complex and heavy formula like tanh , and it gives fat sounds like with analog synths. Inspired by Bezier curves but with two segments only , no need more. It works with absolute values . It has a normal behavior for values between -1 and +1 , and is designed to manage…
-
User library FM12 Questions and Answers.
Before using FM12 turn the volume down as some patches might be loud. I realize FM sound programming is a real groove busters but only good things come out of a little work. Let me know if you have any questions. Most of the info should be there but I may have missed something or the info is not clear. However to get…
-
Does anyone know how to use all pass filters to restore the phase shift from filters.
Not sure if it can be done but I was hoping to re align the phase shift inherent with low pass filters. I think all pass filters have a specific phase shift but I'm not sure if they can be placed in series with low pass filters to re establish the original phase before filtering. Does anyone have any experience with this?
-
How do I get the Core macro "X-over 3wLR4+" to output sound?
Hi, I am dabbling in multiband processing and ran across a Core macro in the factory library titled "X-over 3wLR4", which seems like an ideal way to split a signal into three discreet bands via Linkwitz-Riley LR4 filters. And got stuck trying to get it to work as intended.. The Reaktor Core manual advises to use a "X-over…
-
M+ standalone optimized Reaktor content from the community
Attn M+ standalone users, Let us know if these work on your M+? So you DL any .ens and copy it to your SD card, under "Native Instruments/User Content/" and M+ browser should then find it in: EFFECTS - REAKTOR - USER (for effects) or INSTRUMENTS - REAKTOR - USER (for instruments) --- INSTRUMENTS MNFM - A monophonic 4…
-
Need to set the quantization direction
Is there a quantizer block anywhere where I can set whether to quantize upwards, downwards or to the nearest note? Or does anyone have an idea how I could get QUANT to always quantize upwards (or downwards)? Many thanks in advance!
-
I'm trying to use the xr gate to switch between different filters.
The xr gate is rigged to activate with a 1 going in or deactivate with a zero. Is there a way to change the value from 1 to 2 or 3… So I can use a panel knob to switch between different filters. Something like this. Below is the gate module. Is there a way to modify this gate so it can turn on with another number besides 1…
-
Is there a way to pass a signal straight thru a core macro and use the xr gate on the macro.
I have 4 selectable filters by using the xr gate using the comparators as shown in the middle picture to get it to work correctly. Once I got it working I was hoping to not use the top one pole filter and instead make a straight pass thru when it's selected. The problem is how to do that without a function of some sort.…
-
Does anyone know why this doesn't work
This is one of those deals where it only works when I open this core macro. The in and F work fine but the select doesn't work properly. The value of the select is there but the gates don't turn on one of the selected filters. Any suggestions?
-
Features we wish Reaktor had.
I think the only thing I find cumbersome is the lack of ease for storing a snapshot. Although it works fine but I wish I could simply click a button to save a preset, give it a name and a choice of categories. Can't think of anything else right now.
-
How do I create mutually exclusive buttons in reaktor
Hi folks. First time here. Trying to belatedly learn reaktor to build a specific audio processor I want and can't find anywhere. As part of that, I want to create a group of buttons that have arm exclusivity, so that when one of them is on, all the others are off, and if i click a different one in the group, the same…
-
Reaktor Tips & Tricks from the old forum
The idea is to dig-out valuable information from the old forum and post them again here, so they will be preserved. Here is the link to the Web Archives, so... lets dig! Necessary Rule: You should post the name of the person who provided the tip that you re-post here, at the end of your comment, "posted by John", or…
-
How to make a shepard/risset tone with the sine bank module?
I am trying to create a shepard/risset tone generator using the sine bank module, I have tried several different methods and none of them have provided useful results. I want to have a saw/square wave consisting of 16 harmonic partials rising or falling over time. Ideally there would be 8 layers to make this sound smooth…
-
Can i port reaktor instruments to vst? if so, how?
Hi, guys I was wondering if there was a way to port a reaktor instrument i made into vst3 format. I know Max has an extension for this called RNBO, but I'm much more comfortable using Reaktor's node system. I appreciate any help.
-
Core Implementation of Impulse Generator
I want to implement a simple impulse generator within CoreMacro. It will output a signal at level 1 for just one sample when it receives a gate input. I am imagining the Core version of the Primary Impulse module, but I’m struggling with how to design it. I would greatly appreciate any guidance you could provide. I’ve…