-
Full kit group isn't loading Mikro MK3
Hi, Im having a problem loading a full kit on my Maschine Mikro MK3. I had it all set up before and recorded a few loops with a drum kit called "take it back kit" I changed the kit and tried to change it back, and now all of my midi notes in the piano roll have gone black instead of orange and only 2 pads are lit up. when…
-
Maschine doesn't see my MP3 samples.
I have recorded my own samples and have them as mp3's in a folder on my desk top. I can't drop them in to Maschine because they show up darker and when I go on files in the Maschine window, then click desktop, I can see the samples folder there but when I click it, it's empty. Do the files need to be a different format or…
-
Maschine Mk3 "wobbly" USB connection: should I open it up?
Hi, I am the happy owner of an MK3 and have notice that the USB host connector is a bit loose, and occasionally the Mk3 drops out. With a bit of fiddling I can get it to reconnect to the SW. When switching on my laptop while the USB cable is plugged in, I sometimes don't see the "Please start MASCHINE, CONTROLLER EDITOR or…
-
problem with s4mk2 and mac installation of driver
hello everyone, i have a problem with my s4 mk2. i have TRAKTOR 3 pro on a MAC BOOK PRO but it doesn't recognize my traktor kontroller. I' m trying to install the driver but it' s impossbile, always the message: " there is a problem, try to contact the producer od the driver". someone have something to suggest?? i m…
-
Traktor Pro 3: Issue Loading on to stopped deck
Hi all! I'm prepping for a show tomorrow, and just this week starting having a glitch: I have my setting to "loading only on to stopped decks", which I definitely want to keep ON. However, a few times this week I get the error "can't load onto playing deck" even when the deck is stopped. I've tried everything to get it to…
-
Native softwares installations
Hello, I have several Native softwares (Komplete Kontrol, Kontakt, Reaktor, Massive X etc.) and I would like to know how many installations I can do on Mac & PC at the same time? Thanks a lot!
-
RX10 Elements Installation Fails (Mac)
I have followed the steps here in the "Native Access Error Message" KB (can't share link too new) Every other application I have (Kontakt Standard Edition) plus several individual packages I have purchased are installed fine. But on the RX10 Elements that came as part of my S61 Keyboard serial number failed to install.…
-
New S4 MK3 - Master Level Meter LEDs not Lighting Up
Hello, I just purchased an S4 MK3 and am confused by the master volume meter LEDs. I can only get it to show the LED next to -15 when I crank the master knob up to around 2 o'clock. I turned my speakers all the way down and cranked the master knob and then it reads. Does the S4 just have so much overhead that I'm never…
-
Blinking lights on S61 mk2
I’ve had my Kontrol S61 for a few months now and love it. I’ve used it daily so far with no significant issues that a restart didn’t fix. Today I walked into my studio and all the lights were blinking in a pattern, like a disco mode on some digital mixers. No response from the unit. Tried the suggested NI troubleshooting…
-
KK S61 Mk3 MIDI Issue
My S61 stopped transmitting keybed MIDI info. The macro knobs work fine, and I can browse and load instruments in Komplete Kontrol. However, KK, Logic, Live, standalone instruments, and my notation editor receive no input from the actual keyboard itself. It seemed to happen after the latest firmware release (1.5.5). For…
-
Unable to download Traktor Pro 3 on my new MacBook Pro M3 with Sonoma 14.2.1
I am trying to get Traktor Pro 3 installed on my new MacBook Pro M3 with Sonoma. I tried giving full disk access to Native Instruments but it won’t download the installation file for Traktor Pro 3. It says it is starting the download then it immediately fails. I tried to add full disk access to the NTKDaemon but I couldn’t…
-
Komplete Audio 6 on Mac OS BigSur 11.7.8 crakcling/crisping sound
Hello, I recently bought the Komplete Audio 6 which arrived just today (Dec,30, 2023) and I plugged on my Macbook pro with Mac OS BigSur 11.7.8. Initially, it seemed to work just fine. However, after a few minutes, a crispy crakcling sound started on my monitors fading out all the sound after a few seconds after starting.…
-
S4 Mk3 - Mixer FX Not 0% at 12 O'clock
I just received my S4 Mk3 and noticed a strange quirk. If the Mixer FX button is ON for a channel and the mixer effect is changed via one of the 4 Mixer FX buttons, there is a pop/blip in the audio for that channel. I discovered the mixer FX knob is not truly off when turned to the 12 o'clock position. I can see this by…
-
Payment status is still under review
Payment status is still under review. It's been 2 days since the money was withdrawn. Please let me know what to do.
-
Custom Pattern Player F1 Mapping
Hope this finds you well. I updated my original PP mapping for the F1 and here is the result. https://maps.djtechtools.com/mappings/13841 Note: it is done via the MIDI Mode and not the User Mode so you will need to import the template inside the Controller Editor. If you have questions, let me know!