Coming up next for MASCHINE and MASCHINE+
Comments
-
If you're on iOS, camera connection kit and a USB A to USB B cable. Remember to activate STORAGE MODE in M+, as usual.
Tested this just now, and when I activate STORAGE MODE, the M+ SD card shows up in iOS files app.
NOTE: iOS does not have a feature for ejecting a USB device, so you need to be aware of a few things unless you want to corrupt your transfers. Please read this discussion for details:
This means that if you absolutely want to make sure you are not corrupting your USB storage upon disconnect, you need to shut down the iOS device.
2 -
I’m loving Maschine and diving into it more and more lately. With knobs controlling start time, pitch, velocity and length, piano-roll editing seems easier to me than all of my DAWs, with one exception. I really need the ability to mute notes/events. It’s an important part of editing, at least for me. My current workaround is to turn down the level of the events to zero, but when I wanna mute several things to try out an idea it gets to be a bit much. I have almost all the Maschine expansions between Komplete Ultimate CE and buying some a la carte. After re-listening and favoriting more content, and watching more videos, I’m utilizing them even more. Now if I could just remember which expansions to go to for what I’m looking for… I know there are many folks with very legitimate requests. Not sure if this weighs in heavily enough to implement or not, but I can’t be the only user the wants to mute stuff. Peace
5 -
I know it is not ideal, but you might delete those notes. And udelete them later. Or nudge the group of notes outside start-end of pattern. That is, what I do sometimes....
0 -
When is Maschine getting aftertouch?
0 -
in maschine plus standalone mode able to save project and samples to external hard drive?
0 -
Any teaser screen shots of the new sampler to tide us over until the release??
2 -
It's not a new sampler, it's just a new function built into the current one, accessed by the sampling menu. There's not a lot to show on a screenshot, you just dial in some settings and it does its thing automatically.
1 -
^ cool, that is what I meant. Let’s get a look at the new multi sampler feature then!!!
0 -
I really hope that the new sequencer from Squarp Instruments (Hapax) caught the attention of NI...
I would really like to see this kind of realtime midi effects on Maschine
a modern sequencer must integrate this kind of things imo
trigger conditions (Elektron) or midi modifiers like on the Cirklon or the Pyramid/Hapax 🤘
5 -
I understand that you have to say this, but I think my tone is perfectly reasonable. This is a fairly expensive ecosystem to buy into, and the company's decisions & general attitude towards criticism of any kind is more toxic than "no no" words. I'm a disabled individual on government assistance, and put this on a payment plan, and while I'm going to be able to get a lot out of the M+, it kinda sucks that my $1500 (after tax) piece of kit has such huge weaknesses. I'll watch my language, but out of contempt.
0 -
@TheLoudest - existing Maschine has 4x4 compared to other hardware mentioned, how do you expect the interface to work smoothly. The pads are relatively huge - best suited for drumming (obviously) not sequencing duty. In my view, following a pattern of "climbing stairs" instead of horizontal movement is clunky enough, using a 32-step or more pattern is gonna be a tough act to visually follow. NI is smart in that they called it the Maschine+ which would mean same thing but an improved version instead of Maschine Pro or X. I wished for a new groovebox hardware.
0 -
Hey @Matt_NI not sure if this has been mentioned before or if this is the place to do so, but it would be awesome to be able to pin plug-ins on the mixer view for example, if I was gain staging drums for export for a speedier workflow it would be nice to be able to load my VU meter or Meter plug in on the master channel or group channel and pin it, so no matter what Track I click on it always remains visible. currently it will only stay open if you have that track selected, not sure if this has been requested as a feature but for me it would be a massive time saver?
5 -
the 4x4 matrix is not a problem.
besides, the whole Maschine workflow is just perfect.
I'm only talking about "MIDI EFFECTS"
Maschine has no realtime midi effect (apart from the classic arpeggiator)
and it is in this area that NI could draw inspiration from the Cirklon and Pyramid/Hapax
6 -
Similarly, being able to pin the relevant drum GUI when using drums in group mode, so you didn't have to keep clicking on sound one to access it, would be a good stop gap till something proper could be done about drum routing.
3 -
I use this meter that has an option to unpin parts of the plugin and they do not close and to be able to visualize the db, image values... you can even put several meters in groups and masts on a separate screen... it's very configurable, whatever you want and very complete, it is not native but it does its job... I leave an image so you can see how I have it configured and if you are interested, you already know what it is and what you can do.
The meter is the SPL HAWK EYE, from Plugins Alliance, I bought it on sale at $29 with a discount that they give you over time... I don't know if this is what you wanted, if it is, I hope it has helped you of help.
A greeting.
0
Categories
- All Categories
- 19 Welcome
- 1.4K Hangout
- 60 NI News
- 729 Tech Talks
- 3.8K Native Access
- 15.7K Komplete
- 1.9K Komplete General
- 4.1K Komplete Kontrol
- 5.4K Kontakt
- 1.5K Reaktor
- 363 Battery 4
- 810 Guitar Rig & FX
- 413 Massive X & Synths
- 1.2K Other Software & Hardware
- 5.4K Maschine
- 6.9K Traktor
- 6.9K Traktor Software & Hardware
- Check out everything you can do
- Create an account
- See member benefits
- Answer questions
- Ask the community
- See product news
- Connect with creators