Coming up next for MASCHINE and MASCHINE+

1161719212230

Comments

  • tetsuneko
    tetsuneko Member Posts: 784 Expert
    edited March 2022

    If you're on iOS, camera connection kit and a USB A to USB B cable. Remember to activate STORAGE MODE in M+, as usual.

    Tested this just now, and when I activate STORAGE MODE, the M+ SD card shows up in iOS files app.

    NOTE: iOS does not have a feature for ejecting a USB device, so you need to be aware of a few things unless you want to corrupt your transfers. Please read this discussion for details:


    This means that if you absolutely want to make sure you are not corrupting your USB storage upon disconnect, you need to shut down the iOS device.

  • Kubrak
    Kubrak Member Posts: 3,066 Expert

    I know it is not ideal, but you might delete those notes. And udelete them later. Or nudge the group of notes outside start-end of pattern. That is, what I do sometimes....

  • RedwardMc
    RedwardMc Member Posts: 84 Advisor

    When is Maschine getting aftertouch?

  • arón nitta
    arón nitta Member Posts: 3 Newcomer
    edited March 2022

    in maschine plus standalone mode able to save project and samples to external hard drive?

  • OhulahanBass
    OhulahanBass Member Posts: 186 Pro

    @Matt_NI

    Any teaser screen shots of the new sampler to tide us over until the release??

  • D-One
    D-One Moderator Posts: 3,562 mod

    It's not a new sampler, it's just a new function built into the current one, accessed by the sampling menu. There's not a lot to show on a screenshot, you just dial in some settings and it does its thing automatically.

  • OhulahanBass
    OhulahanBass Member Posts: 186 Pro
    edited March 2022

    ^ cool, that is what I meant. Let’s get a look at the new multi sampler feature then!!!

  • Cretin Dilettante
    Cretin Dilettante Member Posts: 197 Pro

    I understand that you have to say this, but I think my tone is perfectly reasonable. This is a fairly expensive ecosystem to buy into, and the company's decisions & general attitude towards criticism of any kind is more toxic than "no no" words. I'm a disabled individual on government assistance, and put this on a payment plan, and while I'm going to be able to get a lot out of the M+, it kinda sucks that my $1500 (after tax) piece of kit has such huge weaknesses. I'll watch my language, but out of contempt.

  • Percivale
    Percivale Member Posts: 225 Pro

    @TheLoudest - existing Maschine has 4x4 compared to other hardware mentioned, how do you expect the interface to work smoothly. The pads are relatively huge - best suited for drumming (obviously) not sequencing duty. In my view, following a pattern of "climbing stairs" instead of horizontal movement is clunky enough, using a 32-step or more pattern is gonna be a tough act to visually follow. NI is smart in that they called it the Maschine+ which would mean same thing but an improved version instead of Maschine Pro or X. I wished for a new groovebox hardware.

  • tempsperdu
    tempsperdu Member Posts: 425 Pro

    Similarly, being able to pin the relevant drum GUI when using drums in group mode, so you didn't have to keep clicking on sound one to access it, would be a good stop gap till something proper could be done about drum routing.

  • Chris Shelving
    Chris Shelving Member Posts: 34 Helper
    edited March 2022

    I use this meter that has an option to unpin parts of the plugin and they do not close and to be able to visualize the db, image values... you can even put several meters in groups and masts on a separate screen... it's very configurable, whatever you want and very complete, it is not native but it does its job... I leave an image so you can see how I have it configured and if you are interested, you already know what it is and what you can do.


    The meter is the SPL HAWK EYE, from Plugins Alliance, I bought it on sale at $29 with a discount that they give you over time... I don't know if this is what you wanted, if it is, I hope it has helped you of help.


    A greeting.

This discussion has been closed.
Back To Top