X1MK3: Community Performance MOD (qml coding)

spinlud

Uhm ok, actually I have tried to implement the code of fx layer on the arrows mixer. They light up in yellow color for effects, while light up in blue for remix decks so it is not very confusing to me, but I understand what you mean.

So there is no way to change/select samples on remix deck from the controller?

Btw capture will be cool!

Sûlherokhh

I'd have to remove the remix module used with the X1 and replace it with the code used with the S4 (which is a completely different set). The S4 has 8 buttons for the 4 slots (4 are control/shift buttons) plus use an encoder to scroll through the sample cells. I won't do that, too few control elements on the X1.

Sûlherokhh

UPDATE: X1MK3 - Community Performance MOD Version 11 beta 4d TP 4.2.0 :

New Features:

• If deck is synced (and the global clock is tempo master), SYNC(Hold)+LoopEncoder(Turn) adjusts clock BPM. SYNC(Hold)+LoopEncoder(Push) will reset clock BPM to track base BPM.
• Engaging Cue Monitor for one channel automatically deactivates Cue Monitor for the other three channels. This is a global effect for the software and works not just on the X1, as long as a mapping file for the X1 is loaded. A custom toggle for this behaviour is in setup.
• Optional BeatsToCue display instead of remaining time / elapsed time. Time display on SHIFT visible in the top left corner of KEY display.
• Redesigned Setup menu with two pages. Click on the buttons to see what they do on the FX screen.
• When not in Browser Mode or using Legacy Encoder, pressing SHIFT+BrowseEncoder will now RE-LOOP. Needle will jump back to Floating Cue (triangle at the bottom of stripe). If it's a Loop, it will also activate it. This is basically just CueAndPlay (CUP), so make sure Mode:Instant in preferences is set, or the track will temporarily pause when the encoder is held down.

Notes:

• Setup Page 1 left side button 4 engages Browser-Mode-Exit when loading a track (new).
• Setup Page 1 right side button 1 engages BeatCounter, buttons 2+3 determine phrase length. Length 1 reduces display to 'Bars.Beats', otherwise you will see 'Phrases.Bars.Beats'
• All the other custom toggles have found new locations (and button colours for orientation).

Test away…

X1MK3_TP4.2.0_PerformanceMod_11_beta4d.zip

Edit: fixed a small bug with beta4c, so here is beta4d

Rudra

https://community.native-instruments.com/discussion/comment/229395#Comment_229395

It works and I like. I would like to add two features in the setting.
a. on Shift + Filter I want to change the FX Slots from the Filter, so that I can choose quickly from that for Slots
b. I want the change the cue to cup ;-)

Best regards

Sûlherokhh

@Rudra

a. on Shift + Filter I want to change the FX Slots from the Filter, so that I can choose quickly from that for Slots

SHIFT+Button 3 (MixerFX) already cycles through the slots.

b. I want the change the cue to cup ;-)

I may have to add a third setup page, … 😄

Rudra

a. on Shift + Filter I want to change the FX Slots from the Filter, so that I can choose quickly from that for Slots

SHIFT+Button 3 (MixerFX) already cycles through the slots.

Yeah, amazing - fast hahaha!

b. I want the change the cue to cup ;-)

I may have to add a third setup page, … 😄

😅 🙏🏽

Sûlherokhh

Remix beat counter done.

Format is fixed Phrases.Bars.Beats counting up, phrase length 4 (internal Traktor values).

X1MK3_TP4.2.0_PerformanceMod_11_beta4e.zip

Sûlherokhh

Progress report:

Working on …

• Adding Capture Source controls. You can already capture samples by pressing an empty pad (1-4) to load a snippet loop from the source.
• Adding quantize controls (size and toggle) for triggering samples in sync with the remix deck beat counter timeline.

Sûlherokhh

https://community.native-instruments.com/discussion/comment/229297#Comment_229297

Instead of the mapping file i provided on the previous page, you can customize the numbers pads:

Sûlherokhh

TEST UPDATE

Remix Deck

• Hold SHIFT and turn Loop Encoder to adjust Capture Source.
• Hold SHIFT and push Loop Encoder to toggle Quantization.
• Hold SHIFT and hold down Loop Encoder and turn Loop Encoder to adjust Quantization (and automatically engage as well).

Requirements

• In LegacyEncoder mode, set SHIFT + Loop Encoder to Key-adjust. Setting it to Beatjump/Move will override the new controls.
• In BrowserMode it only works if browsing is not active; the browsing controls override it (of course).

Note: No screen display for this proof of concept. This is for you to test it and give me feedback. 😁

X1MK3_TP4.2.0_PerformanceMod_11_beta4f.zip

Edit: Slight fix. Quantize toggles on release of Loop Encoder, and only if you don't turn it when held down (which activates it).

X1MK3_TP4.2.0_PerformanceMod_11_beta4g.zip

Sûlherokhh

TEST UPDATE

Screen feedback complete. I had to revert the beta4g changes back to beta4f so that there was no confusion wether or not Quantize is active (Quant Index is black on white when active).

Notes:

• Hotcues 1-4 (and on SHIFT layer: delete Hotcues 1-4) need to be selected (X1MK3 pane in Preferences) for the number buttons! They are used for remix slot functions.
• The (Hotcue→RemixSlot) functions are LOAD (when empty: from capture source) / PLAY (when loaded and stopped) / (UN)MUTE (when loaded and playing).
• The SHIFT (delete Hotcue) functions are LOAD (when empty: from playlist) / STOP (when loaded and playing) / DELETE (when loaded and stopped)

X1MK3_TP4.2.0_PerformanceMod_11_beta4h.zip