-
Traktor z1mk2
Traktor z1 Mk2 fresh out of the box will not stay powered on. It flashes then quickly goes off I therefore can't even enter the provided serial number to begin using it because the software can't read it. Any solution to this issue?
-
How to use vinyl, DVS and a Z1 ?
Its been a good 15 years sincey last gig but I'm getting nostalgic. So I'm looking into getting my SLs out again for home use and really like the idea of using the Z1. My question is, what do I need to run my decks through Traktor while using the Z1 for mixing both files and standard vinyl?
-
2x z1mk2
is it possible to use two z1 mk2 at the same time? and are they free midi learn bar? for example I have 4 faders with pro 4 mfg ________________________________________________ *Translated by mod, please use only English language in the forum.
-
Should you upgrade Z2 to the new Z1mk2 when using x1mk3
I have a traktor kontrol z2+2, but I am swapping the controllers I have to 2 x1mk3, and possibly a F1 as well. As all the system will be usb based should I refresh the mixer to the Z1 ? Any advice would be appreciated as I am so confused and don’t want to make a bad decision. I am now using traktor pro4 with apple M2 thank…
-
Kontrol s4 mk3 no audio in booth output
The booth output of my Kontrol S4 MK3 does not output audio. I am using Traktor 4, and in the audio settings and outputs I have already tried to configure the available output options, but only the master output works by selecting “main/booth L R”. Does anyone know if the controller came with a problem, or if it is a…
-
Tracktor Pioneer DDJ-T1
Hi, I have the Pioneer DDJ-T1 and I need the Tracktor program that has been released for this controller. It can be found without problem in Native Access but my Mac is very old and can not be downloaded with my operating system. With the mapping and drivers I have, it doesn't work well. I need that particular version of…
-
suddenly lost all my playlists
Good evening, I suddenly lost all my playlists. I have version 4.1.1. I went to restore them from my backup but again it doesn't see them at all.
-
In Traktor X1 MK3, I want to chang Deck A, C to C, D
I'm wondering how to set it to 4 Decks in the settings and run X1 with Decks A and B, then change Decks to C and D using X1 Button.
-
Operating system too new or hardware too old?
I have a macbook mid 2010 with yosemite, I work with traktor 2.11 and traktor kontrol s4 mk1. I can't update traktor software to version 3 and I can't update native access. I bought the new MacbookAir M2, I updated to Traktor 3 but it doesn't recognize my Traktor S4 MK1 console. Do I have to change jobs or is there a…
-
Help with QML edit to repurpose Kontrol S5 "Freeze" button as Active Loop toggle
I've done a little QML editing, but I'm having trouble with this challenge: On the S5, I wish there were a way to turn on "Active Loop" mode without setting a loop. In other words, a way to toggle the loop button to the right of the IN/OUT buttons on the UI: My goal is to control whether or not my deck automatically starts…
-
My traktor 4 will not allow me to select output devices after I choose the Laptop sound card.
My traktor 4 will not allow me to select output devices after I choose the Laptop sound card. The track waveform runs but shows no options here any Ideas ? I need the laptop speakers to work for preparation. Thank you
-
Traktor Pro 4 Linux support
The processor on my backup laptop isn't supported by Windows 11, so I'm thinking of fitting a SSD and installing Linux. Does anyone know if Traktor Pro 4 will run on Linux? Well Native Access I suppose …
-
How do I change the default resolution on screen rotary faders to FINE?
When I'm sorting sets out I often just mix on my Macbook keyboard, but all the rotary fader defaults are far too coarse. For example the key knobs are set to +/- 2 (when really they should be +/-1) and the FILTER knobs are +/- 12% when I prefer the FINE setting (+/- 3%). Same for all the other rotary knobs. Is there any…
-
Phase + z2 moves sample foward
Hi, has anyone noticed that when we play with Phase + Z2 + Traktor 4 (updated) doing a baby scratch, the sample simply moves forward and doesn't go back? You have to compensate by going back further. Test it out... baby scratch the track moves forward. I use everything updated. Phase updated, MacOS Monteray, Traktor in the…
-
Bug in Traktor Pro 4 version 4.11.23
I post this question again so that it is unanswered again. Because someone deliberately wrote something, and deleted it short after so that the question looks like answered while it is not. Why would someone do this trick? Here is the original question: Does anyone has problem in Traktor Pro 4 after installing the update…
-
Problem with Traktor Pro 4.10 taking ages to quit with big collection
I updated from Traktor Pro 3.5.3 to 4.10 and I experience a problem with shutting down the software. I am on a Windows 10 computer I7 with 16 GB RAM. Traktor 3 takes about 8 seconds to store the collection and quit. Traktor 4 takes 12 Minutes with the same collection. I took over the settings and collection when updating.…
-
TP / Traktor Kontrol S4 MK3: How to map Phono Turntables to C & D channels?
Hi, By default, phono inputs are set to channels A & B which are the default channels for the digital tracks. This is highly inconvenient as it doesn't seem possible to hide A & B channels in Traktor Pro as it takes screen real estate. My apologies in advance as I haven't tested things further. In order to map the phono…
-
Z1MK2 Issues
Hi, I cant seem to get my Z1 working properly: I have a win 10 PC with a Creative Blaster sound card connected to a 3 piece speaker setup via SPDIF out. I have the Z1MK2 USB connected to a USB 2.0 port and the 3.5 to the line in on the creative (have tested with both 3.5 and phono) PC audio is set to SPDIF out Audio…
-
TRAKTOR KONTROL S2 OUTPOUTS ONLY LEFT FROM BOTH LEFT AND RIGHT!
i have a problem with my S4 last week was playing all ok. And today I noticed only the left main output working in both rca and plug. Traktor mixer output works fine, just when controller is connected. Please Help!
-
Traktor Pro 4.1 Trial page not updated
Hi, The title says it all. The page to download the trial version of Traktor Pro is not updated to 4.1 DJ Software : Traktor Pro 4 : Free Trial | Traktor it's still 4.0.2 When will the update be available for trial?
