-
Maschine 2 Audio Delay Compensation of Internal Effects
Working on a Project with a Drummer wich has to be super tight and I experience a 3ms latency when rendering drum grooves from Maschine that run through the Internal Limiter. That latency is not even compensated when i drag out the audio of maschine Itself. Once i disable the limiter everything is back int he grid. Is that…
-
Keyboard mode - first sample sometimes placed on E key instead of C
I'm using a Kontrol keyboard along with Maschine Studio. Randomly when I chop some samples, assign to a group, then trigger one sample on the keyboard (because I want to hear it in different pitches vs pad mode), the E key triggers it instead of the C (aka the sound was mapped to E instead of C). It's not a big deal, as…
-
Dont mind paying the 40$ to upgrade to Machine 3 but
That will make my maschine mk2 incompatible right? So I would be stuck with a Mk2 without a DAW? Tbh the way I am making beats I Don't really need the Mk2. I am find dragging and dropping the DAW. Will Native Access have a fit if I try and use the already installed Maschine 2.0 with mk2 on one hard drive and then install…
-
Sending Midi notes from the maschine (MK3) VST into Ableton
Currently I am able to send Midi from ableton to the maschine and then hear the audio inside of Ableton. But I don't manage to do it the other way around. When I am on group 1 sound 1 and I write a melody, Then I select MIDI output to host (channel 3), I don't see any midi signal coming into Abelton. I hope this is…
-
New Machine MK4 controller along with Maschine 3.0 software later this year?
The word is out that the Maschine 3.0 software update will be released later this year and I'm guessing there will be a new Maschine MK4 controller to go along with the 3.0 software. What form factor do you guys think the new Maschine MK4 controller will have? 1. They'll stick to something square and similar to the current…
-
Is there a fix for "unexpected error occured" installing expansions on the plus?
I see the error posted on here many times, but no particular fix. I've only managed to get one single expansion installed with dozens of attempts. While it fails during the download occasionally, most of the time download reaches 100%, then it tries to install for 5 mins, then the error message comes up Yes, I've tried…
-
Machine Studio. Can I still upload komtrol products ?
I have an option to buy machine studio. Can I still upload komtrol products. Etc ?
-
My Reaktor 6 VST3 plugin is not found in Maschine 3. how do i get it back?
Hello. My Reaktor 6 is only AU on Machine 3 and Komplete Kontrol software, it is fine elsewhere. It has Reaktor 6 FX as VST3 (not AU). The problem is none of my Reaktor plugins working Maschine 3 or Komplete Kontrol. I have reinstalled Reaktor and rescanned my plugins in Maschine 3. To no avail. Can anyone help pls….?
-
Why doesn’t Maschine+ show the project which is open on my laptop in the display windows?
hi, I am trying to run my Maschine+ on a laptop with the latest software. The stand alone mode works but when I switch to controller mode I only see the lit up pads plus the menu bar and two dark display windows with the logo and the „Production and Performance System“. What did I forgot or what might be the problem?…
-
can´t save my projekt within maschine 3.0
Hi. I have a problem. My project can no longer be saved. I saved in the meantime and changed a few small things at the end and am now done with the project, but it can no longer be saved. Error Project could not be saved. Does anyone have an idea.
-
Anyone else having problems with maschine 3
i’m having a problem where machine three isn’t saving my projects and it’s super frustrating because I’ve been making some really good beats and they just don’t save
-
Scarbee Bass
I downloaded and paid for this plug in and can 't seem to download it anywhere. I upgraded to the new Native. brand new Mac ook air m3 …help
-
Maschine pedal for guitarists
This is the workflow for creating custom beats on the Boss RC 10-R (https://www.youtube.com/watch?v=CvYEyoQn1Eg). I have that pedal, and my problem is - I use a lot of self-created Maschine and Kontakt beats and as far as I can tell 1. none of the backing rhythm guitar pedals (RC-10R, Beat Buddy, etc) make it easy to…
-
Maschine mk3 selecting sounds directly like the maschine mk2
I am using my maschine mk3 to sequence my drumcomputer. For this drumcomputer the sounds are triggered from C1 to C2 and for every one I have added them as a sound to my group. I can select each sound by pressing pad mode, then the pad/sound I want to use and then enter the steps in stepmode. However I wished there was a…
-
Maschine + use problem, pattern/scene screen
Hello, my maschine + when I press pattern or scene the screen changes but just 1 second it is temporary, it does not stay frozen.. what to do? I restarted, reset I tried everything.. why ? help lol thank you!
-
Maschine 3.1 Update - Ableton 12.1 MIDI Remote Script Issue?
I'm trying to use my Maschine MK3 with Ableton Live 12.1 with the new updated MIDI remote scripts, but I can't seem to launch clips using the pads. Only thing I can do is transport control, and mixer controls (Volume, Pan, Solo, Mute all works). The pads don't do anything. Clip colors don't show up (all 16 pads are just…
-
3rd party MK3
Hey I just got my Maschine MK3 from Mercari - was supposed to be brand new but the Serial seems to be used already. I already made a ticket with all the relevant information to support but they seem offline. I'd really like to start playing over the weekend. Any way I can use Maschine without the serial? Thanks!
-
MASCHINE 3.1.1 exports some noises when the task has reached my song's ending.
Customized PC(12700K、RTX3070Ti、Windows 11 Home 64bit) MASCHINE MK3 with MASCHINE 3.1.1 Using iZotope Ozone 11 MOTU Ultralite mk3 FW(not Hybrid) Export Op:192kHz, 32bit float、Normalize、Loop Optimize This problem was just occurred when I selected a Export Option, 192kHz. My AIF driver doesn't work well, so I thought I may be…
-
Is it possible to hybrid live Traktor X1 mk3 and Maschine Mikro mk3?
Hi! I want to use Traktor X1 mk3 and Maschine Mikro mk3 for hybrid live. I'm using Windows. I made pref for both controllers the same audio (ASIO4ALL) and enabled LINK in both Traktor pro4 and Maschine 2. I can see that the link is ok because the tempo changes on both devices. But I can only hear X1, Mikro is silent. What…
-
Pc and Maschine sounds at same time possible ?
hey, im new to this here so i tried to play a youtube video and the mashine at the same time, so i can watch turtorials and learn at the same time. I just bought and audio interface cause i could not run the sound of my pc and the maschine connectet to the pc at the same time. it still wont work, i tried asio4all driver…