-
Komplete S88 Mk3 Knob Issues after Firmware Update in Logic
Hi, After updating the firmware, my knobs will now only increase values (Can only turn things to 100%) and aren't able to reduce values when working in Logic Pro. This happens in both the plug-in mode and the Daw mode. I don't think there's anything wrong with the actual knobs because when I press Settings and try to…
-
Instruments available
Hi, i would like to know please, why in Komplete Kontrol, more Instruments are available, than Kontakt 8? Many thanks in advance! Best Regards
-
Balance knob keeps resetting in Komplete Kontrol
When I press play after stop, or try to render the sound in Komplete Kontrol, the first knob (Balance between 2 sounds) keeps resetting. The rest of the knobs doesnt do this. I use FL Studio and a Kontrol S49N controller. It also happens when I try to bounce a song. I've already tried to check midi learn in the stand-alone…
-
Hardware Connection Service version 2.04
Hoping someone else had this issue and figured out a resolution. After installing the new Hardware Connection service update, my Kontrol S61 (MK3) keyboard now won't link to any plugins within Komplete Kontrol. It will still trigger notes and Midi controls like aftertouch, but otherwise it doesn't link to any plugins…
-
The latest firmware update bricked KONTROL S MK3 keyboard
Hey guys, I’ve read similar stuff here, but I think this case is a little bit different. So, I got an error during the update: An error occurred while updating your KONTROL S MK3 (error -2). Please disconnect the KONTROL S MK3, unpower it and quit the KSMK3 Updater. Then reconnect the KONTROL S MK3, restart KSMK3 Updater…
-
DAW integration missing - transport buttons don't work
Hi everyone, I’m experiencing a persistent issue with my Komplete Kontrol S61 MK2 and Logic Pro X on macOS Sequoia, and I'm hoping someone here can help (or share the required file). Problem: DAW integration for Logic is completely missing – the transport buttons (Play, Stop, Record, Loop, Metronome) on my S61 MK2 are…
-
Hardware Connection Service update fail after firmware update to 2.0.4
Windows 11: After successfully updating the firmware for my S88 Mk3 to 2.0.4 I was asked to update the Hardware Connection Service on the S88 screen. So within Native Access (latest version) I clicked "update" for the Hardware Connection service update and updated with confirmation message that it completed successfully.…
-
the new kk update is not working for me in cubase.
since I'v updated nothing changed in cubase. it says "no instrument/effect loaded" , even though do have plugins loaded. in Logic Pro it works fine, so this seems to be cubase issue. thanks for any help.
-
Am I eligible for Kontakt 8 FULL?
I bought the KONTROL S61 MK3. Am I not entitled to the full version of Kontakt 8? That’s what it says at 0:50 in this official NI video: But I don’t see it available in Native Access or in my account. https://www.youtube.com/watch?v=yfwjJr9sfPs&t=628s
-
kontrol s61 mk3 issues??
hi all, i just got my mk3 keyboard and i am having an issue where it doesnt always connect to the track while using with a daw. im using a direct connection with kontakt 8 , if i select another track (lets say uhe dive) and then go back to the kontakt track, it doesnt re-connect and i cant use the keyboards pots and the…
-
S88 MK3 is On, but can't be found on the PC
My setup used to work with Studio One around six months ago, and I'm back to it. Somehow can't get any app to recall the S MK3 even though it looks updated. Native Access 3.20.0, reinstalled Komplete Kontrol, and restarted the PC to be sure. The hardware connection service app is the latest v.2.0.4, and I haven't seen any…
-
Connection issue and solution after installed Komplete Kontrol Mk3 firmware 2.0.4
Let me share my story with the update, it may help others. I instantly updated my Kontrol S61 keyboard with 2.0.4 firmware after I saw that there is a new version available in the NI newsletter. → first mistake After it installed (it takes 2+ hours every time) only the basic functionalities worked, so I saw only the…
-
Issues on setting up Kontrol mk3 & Yamaha FC3a
Hi community, I try to setup a Yamaha FC3a pedal (with half peddling function / potentiometer) on my new s-series mk3 Kontrol keyboard. I tried to change each and every parameter on the keyboard but without success. I changed to continuous mode, reset CC64, calibrated the pedal, played with swap ring/tip. I seems that the…
-
Serialnumber always appears - Hardware Connection Service can´t be installed
Hi, on my Kontrol S49 mk3 is always shown the serial number, even if i enter it in native access. And in Native Access, the Hardware Connection Service i am not able to install it. It shows after downloading and installed, the message appears: installed. But thats not true. There is still the button "Install". Anyone any…
-
Is there any plan's of kk S mk3 getting dynamic contextual control names?
I use the s49 mk3 with cubase quick controls, and it's annoying having static names for the controls (qc1, qc2, etc.). I would like if the names of the perimeters change based on what it's controlling, and would be able to properly integrate it with cubase midi remote. there are a lot of other controllers that support it,…
-
Do I need to keep Komplete 10 Ultimate Hard Drive with installers?
Hi everyone! Many years ago I bought Komplete 10 Ultimate, which came on a HDD. Since then I've upgraded to Komplete 14 Ultimate. Do I need to keep all the installers and stuff that came on the HDD, or can I wipe it and use it for file storage? Thanks.
-
Komplete Kontrol S49 MK3 – Hardware Connection Service installation issue (device goes to Default MI
Hello, Yesterday I purchased Komplete Kontrol S49 MK3 and installed all required updates, firmware, and software. Today, the device worked for a while, but after some time it started automatically switching to Default MIDI Template, and the Komplete Kontrol software stopped recognizing it as a supported device. In Native…
-
Kontrol MkIII User Remote Script for Ableton Live
I have updated the remote script I made ages ago for Live so it works with the MkIII. This adds the 'blue hand' control to any loaded device (native or plugin) or rack macro and works fine alongside the DAW integration, which covers mixer and transport control mainly but not devices and racks I added the ability to toggle…
-
Komplete Kontrol S88 MK2 Sustain Pedal Not Working
Hello, I recently purchased a used Komplete Kontrol S88 MK2 master keyboard. The keyboard was in excellent overall condition. However, when I tried to connect my existing sustain pedal and play in my DAW, Logic Pro, I noticed that the sustain pedal wasn't working. So, I Googled and found comments from others who had…
-
How to load MIDI templates to Komplete Kontrol M32?
I am trying to load templates I have created in Komplete Kontrol to my Komplete Kontrol M32. I have created new templates in Komplete Kontrol, changed their names and adjusted parameters (e.g. names of virtual knobs). However, when I go to the Komplete Kontrol and select MIDI mode, there is still only one template…
