-
How can I install the drivers on my IOs sequoia m1?
buenas noches necesito ayuda.. acabo de adquirir una mac m1 con IOs sequoia y poseo un traktor x1 & un traktor dj audio 2 mi sistema operativo no me deja instalar dichos drivers tengo algo de premura por que tengo una presentación el dia sabado Good night, I need help.. I just bought a mac m1 with IOs sequoia and I have a…
-
Anyone have any luck with mapping and X1 mK1 to control the patter player?
I'm just trying to midi map the FX2 side of my mk1 Kontrol X1 to control the pattern player instead of using the onscreen/mouse option. I'd like to utilize the knobs and buttons on my X1 on the FX2 side of the controller. Im running Traktor Pro 4 , and have a F1 set up as a remix deck on deck C. Forgoing the fx2 channel…
-
How Can I connect X1 To Traktor X1 Mk1
Can Anybody Tell me Why X1 Mk1 Doesn't recognized By Traktor Pro 3 ? Its Flashing light Once i connect It To The laptop But It Then Doesn't Give anything after I Open traktor pro3 ! Thanks For The Advice
-
Traktor pro 4 x1 mk1 macOS seqoia
tengo un problema con mi c1 mk1 ya que no es compatible con mi software de traktor y tampoco mi MacBook m3 alguien sabe cómo lo puedo solucionar si me ayudan pago recompensa por PayPal
-
Traktor Pro 4 does not recognize Traktor Kontrol X1 while Traktor Pro 3 does.
If I hook up my X1 nothing happens in Pro 4, not even after manually adjusting Controller Manager in Settings. In Pro 3 though it immediately gets detected and is instantly ready for use. This must clearly be a software issue, anyone else having problems with their X1 in Pro 4? If so, is there a temporary workaround?
-
Traktor Kontrol X1 MK1 compatibility with SEQUOIA 15.1
Is Traktor Kontrol X1 MK1 compatible with SEQUOIA 15.1?
-
X1 and M4 Kontrollers
Hello I own both of the above and have just bought a new MacBook Pro. Migration from my old Mac would't transfer the previous interface so am wondering which one I should buy to use with both Kontrollers? Also the cables that connect from X1 and M4 aren't compatible with this MacBook. Please could you advise? Much…
-
New Kontrol Z1 espected?
Hello everyone, I recently bought a Traktor X1 and a KOMPLETE AUDIO 1. However, I'm thinking of getting a Kontrol Z1, but this device has been on the market for several years and since Native recently updated the X1, is it likely that the Z1 will also be updated? Thank you
-
Any chance the Kontrol X1 MK1 will be M1 in the future or should I just throw it away?
Another frustration following my Macbook Pro upgrade. Can't get a smooth waveform and now my X1 MK1 looks like it's not supported. Should I just throw this thing into trash and find something else to take it's place? Started with all Traktor gear 10 years ago and this is my last piece. At this point, the software is the…
-
Traktor kontrol x1 mk I and Windows 11
Hello. Do you know if traktor Kontrol x1 mk I is compatible with Windows 11, or only x1 mk II it is? Thanks!
-
I have MacBook Pro intel Sonoma Mac OS with Traktor X1 MK1
During the installation driver I getting this error (an error occurred during installation the installer encountered an error that caused the installation to fail) what should I do?
-
SOS I need help ! KONTROL X1 MK3 - Loop move by 1-Beat only
Hello NI community, i recently bought the X1 MK3 without testing it beforehand. Stupid of me 🤫! Can someone please explain to me how to change the mapping using the Controller Manager. I would like to have the same default mapping of the old X1 MK1 for moving a Loop by 1-Beat only. (Press the Loop Encoder to activate a…
-
Macbook Ventura - Traktor 3 - Old X1 controller not supported ?
I have just upgraded to a new MacBook running Ventura and Traktor Pro 3. My old X1 controller is not working lights up when plugged in but not recognised in Traktor. Should this be working ?
-
Older hardware not supported on new OS
Just having a think about it / getting off my chest. Kontrol X1 / S4 controller / Maschine MK1/ Audio Kontrol 1, no longer supported to work on my current Mac OS. All now in the scrapper. Ok so I'm now using Kontrol keys / Maschine Mk 3 and plenty other stuff to keep me rollin',but it just occurred to me. the NI gear I now…
-
X1 MK1 Controller + Pattern Player in Traktor Pro Plus
Hi Fam! I would like to control the pattern player in Traktor Pro Plus with my X1 MK1. However, it only responds by default to control the single and group FX. How I can also control the pattern player with my X1 MK1? I would be very happy if someone can help me here. Greetings from Germany!
-
Tracktor x1 mk1 fx mapping needed - I m a bit lost
Hello there people, i just got as a present a traktor x1 mk1 and one of my friends share his traktor pro 3 license with me, i want to use as fx pannel and being able to play some accapellas and stems, because my set up is currently a DJM 850 and 2 Cdj 2000 - so my mixing and main track controls are already covered. The…
-
Kontrol X1 as midi controller
Hi! Can the Traktor Kontrol X1 (MK1) be used as a midi controller when directly connected to another device? Example: I would like to connect a Kontrol X1 MK1 via USB directly to my Teenage Engineering OP-Z so I can use the X1 as a midi controller. If this is not possible on the MK1, is it possible on the X1 MK2? Thanks!
-
How to assign the Traktor CUE switch to a button on the Kontrol X1?
Hello, I'd like to assign the cue toggle buttons (deck A/B) in Traktor to buttons on the Kontrol X1 MK1 but I'm not sure how to do this. I've attached two screenshots – the first one shows the cue button I'd like to be able to toggle on/off using the controller, and the second one shows an assignment that already exists in…
-
Can't load X1 custom mapping: "there are no mapped controllers", the X1 doesn't seem active
Hello, I am trying to load a custom mapping for Kontrol X1 that I downloaded from this forum. I have been using this mapping for two years without issues on both my desktop and laptop. However, I had to completely uninstall Traktor on my desktop, so the settings were lost. Now, each time I do the fairly simple steps of…
-
Mapping FX select buttons
Hello, I am looking into getting a Kontrol S3 + X1 to control FX units. My question is whether its possible to map out theese buttons for all four decks separately (eg. you press button and FX unit 1 turns on/off on deck A, you press another button and unit 2 turns on/off on deck D). I have been looking for the option in…
-
KONTROL X1 MK1
Bonjour : Je viens de changer mon vieux Mac et je ne trouve pas de solution pour faire fonctionner mon X1 MK1, j' ai essayer sous VENTURA / MONTERY et impossible, serait il d'avoir un procédure même en changeant d'os et en exécutant qu'elle que manip sur le terminal . J'aimerais vraiment garder mon x1 mk1 car j'suis…
-
Traktor x1 mk1 controler
Hello, I'm a working DJ, What is the situation with X1 mk1 controler (About the drivers on m1 ) and What I should do ? I'm using Macbook Air m1, I should wait or I need to buy the mk2 version of controler to use it on m1 ?
-
Second controller doesn't work (X1 mk1)
Hi everyone, I just bought a second x1 mk1 controller to play with my Traktor scratch pro 2. Traktor sees both controllers but the fx2 don't work on the second controller. What do I need to change to make both controllers work properly? Thanks for helping me out! Macbook pro - OSX 10.13 - Traktor pro 2
-
traktor kontrol x1 mk1 pattern player wont work
hi there is there anyway to use x1 mk1 to control pattern player thank you wes
-
Traktor and Mac Touchscreen functionality
I've been using Traktor since the very first release though I did miss / skip the first scratch hardware and ever since the first incarnations. The one thing I wished for and often made the case to Friedemann was decent touchscreen functionality, knowing what and why it was not gonna happen. Now granted I had been barely…
-
Traktor Kontrol X1 Mk1 or Mk2?
Traktor noob here, I just bought a Z2 and now I need the controller to trigger the right deck. There doesn't seem to be a great deal of difference, from those who experienced both which one would you get?
-
Traktor pro3 Cant find my X1
I got 3 computers running mac OS (intel), in only one of them i can use my X1 but in the other two there is no way i can make it work, tryed to update all the drivers for X1 an Traktor, tryed to import the tsi and still nothing. does anybody had the same issue ???
-
Old Hardware on new MacOS M1
Hi everyone, got some troubles with my controller. My macbook pro m1 doesn't want to recognize the controller the controller is > Traktor X1 MK1 i've tried different controller, and seems to be the problem on the controllers itself F1 works flawlessly X1 mark 2 aswell But the X1 MK1 just won't appear on my native software…
-
X1 connected to S8
Hi, Can I connect the X1 to the S8 so I can have dedicated controls for each of the 4 channels on the S8? Thank you in advance! Nathan
-
What's the main difference between Traktor X1 Mk1 & Traktor x1 Mk2?
So I currently have a Traktor S2 MK3 which most people will know is missing the extra FX banks at the top. I have researched that you can use the Traktor X1 as an extra device to gain access to those missing banks and I would like to know what the key differences are between the Traktor X1 MK1 and the Traktor X1 MK2?…
-
Looking for the send knob
...in traktor pro or on the s2 mkiii / x1 / x2 i just havent managed to locate it, or found a mapping for it might sound stupid but i just want the dry/wet (or any knob with mapping) on the x1mki / x1mkii or the fx / action / filter knob on the s2mkiii turn the send knob up and and down again and get lingering effect tails…
-
Traktor Kontrol X1 (The first) is working on Windows11 with a new Audio 6 ?
Hi everyone I would like to know if this X1 that I got will work on Windows 11 with a new Audio 6? To know if I need to buy the X1 MK2 ? I'm currently on windows 7 and it's time to make an upgrade ! Thanks for your help ;)
-
Audio 8 to an Audio 6 Timecode CD's
I've recently upgraded my setup from the original Traktor Scratch Pro/Audio 8/X1 MK1 to a Mac Air i7-5650/X1 MK2 and am now looking to pickup an Audio 6 for compatibility reasons. My question is: Has anyone ever tried the time code cd's from the original scratch pro (Audio 8) with the newer Audio 6 Interface? Curious as it…