-
Komplete Kontrol MK2 mixer stopped working? Try this! (for Windows)
Hi everyone, here’s a quick tip if your Komplete Kontrol MK2 mixer stops working in your DAW in Windows. Open Task Manager → Services in Windows and restart these two services: NIHardwareService NIHostIntegrationAgent Sometimes one of these services may stop responding. Restarting them might fix the problem without needing…
-
Problems with Windows 10 and Komplete Audio 6 Mk 1 driver
Sometime at the end of 2024, Microsoft released an update for Windows 10. Since then, Windows has repeatedly kicked out the audio driver. I have tried many things with the help of ChatGPT, which has not yet helped to solve the problem. You always have to disconnect and reconnect Komplete Audio 6. Just annoying! It can't be…
-
Any problems operating Kontakt on a Windows Tablet PC (e.g. Microsoft Surface)?
Is anyone using Kontakt on a Windows tablet? If so, is it all working as it should? I want to buy a tiny MIDI keyboard and tablet to perform in a band setting (as a backup to my usual instrument). I'm already heavily invested in Komplete 15, so being able to use that in live performance makes most sense. I want to avoid…
-
Symphony Series - Impossible to install
Hello. I have been trying to download Symphony Series many, many times, but when the download completes, I always get “Installation failed”. I have tried every method I know of to try and fix it: 1) Restart the computer and download it again. 2) Change the name of the destination folder to a shorter one without spaces or…
-
I am still unable to log in after following knowledge base instructions
Since the latest update I've been able to apply any serial numbers and am unable to use several products. After following the instructions here: https://support.native-instruments.com/hc/en-us/articles/13415633434269-Native-Access-Error-Unable-to-log-in I am still unable to log in. I get the same message "Unable to log in.…
-
Maschine 2 serial problem
hi! I have a maschine mk2 not used for the past 5 years. I try to install an activate maschine2 software , i add the serial write on the DVD and native access say to me it's ok. But maschine software isn't add on my "products and serial section" in my account. I try to install maschine with the legacy download, it open but…
-
Missing .xml file and crashing
I was using Massive X fine for over a whole month. July 18, the plugin lost the settings I had been using for the past 40 days. Whenever I try to change the wavetable mode the plugin crashes and the DAW crashes to desktop. I tried deleting every file and folder where Massive X had any data or files. I reinstalled. Still…
-
Massive x crash bug.
hello friends. I'm using Google Translate so the sentences may be strange. This afternoon, I opened massive x and when I tried to play around with the waveforms, the daw crashed. The presets work fine, but I'm stuck because I want to make my own sounds. Can someone help me? :(
-
Anyone know of an A.I tool to tag and sort songs by Genre?
Just was curious if anyone has discovered an A.I tool that can identify songs by genre and then create folders or playlists for them? I have around 400 UKG songs downloaded and I'd like to sort them by style (UKG, Speed Garage, etc.) without having to relisten to all 400 of them of lol. Thanks!
-
the link button is missing
hey everyone i try to connect traktor pro 3 with the maschine software over the link function and in traktor pro 3 it is missing a few months ago or so i had it all running through this function and now its complete gone… the option in the settings is still there but the button dont show up i want to use the maschine as an…
-
traktor scratch pro 2 on windows 10
Hello community , Ive reinstalled native access 3.18.1 and it shows my traktor scratch pro 2 software , once installed the program will not open at all , im very puzzled , can anyone help me ?
-
Guitar Rig 7 opens only on second plane
When I open Guitar Rig, I start to hear the distortion working, but no window appears. I can only find it running on task manager on second plane tasks. This issue started hapenning after I tried to test it as a plugin in Cantabile 4.0 (x64). This program crashed, so I didn't try again. I tried reinstalling Guitar Rig,…
-
FM8 and Massive won't install through native access
Hello, I've been having an issue with both FM8 and (original) Massive where I'll click "install" in native access. It will appear like they're downloading and installing, but as soon as it finishes installing, the button lights up again as if they were never installed in the first place, and I'm not able to locate them in…
-
I own KOMPLETE 14 std. Bought 15 std upgrade, and 15 ultimate upgrade. Cannot authorize ultimate.
I own KOMPLETE 14 Standard from a previous purchase. Today I bought KOMPLETE 15 Standard Update (https://www.pluginboutique.com/products/13182-KOMPLETE-15-Standard-Update) I also today bought KOMPLETE 15 Ultimate Upgrade from KOMPLETE Standard…
-
Komplete Select installs fine, never ends scan... I cannot use it!
Hi To make it short, here I am only talking about Stand-alone Komplete Kontrol - actually to be precise Komplete Select. I already done or tried to do whatever I found useful here on these threads. I have done this twice - 1st leaving all settings as NI prefers to sett them. I uninstalled everything twice - totally, the…
-
Traktor Pro 4.2.0 - Windows 11 - Latency Issues - S4 MK3
Hello everyone, Yesterday I installed the latest Traktor update (4.2.0) on my Windows 11 laptop (Acer Nitro 5, i7, 64GB RAM). Since the update, I have been experiencing major latency problems in the software. LatencyMon went massively into the red during a test after installation. I have now adjusted my audio settings to…
-
Get Hardware-Repair Support in Germany
Hey People, so i use the KONTROL S61N for like 3-4 months and since 2 Days it always Turn off when i use is. So i replaced the Connection Wire and it still does not work. So can someone please tell me how i get support to let it Repair?
-
My products are stuck on "install"
I am attempting to install my maschine products on my new computer + hard drive(the downloads are being installed on the external hard drive) yet they are failing to install. However instead of getting an error message my Maschine 2 download is stuck on the "installing" screen and has been for many hours now. While some of…
-
how do i get the software for the maschine mikro mk 2?
i need help and maybe a step by step to download and use the maschine software on windows.
-
how do I submit the generated crashlog?
I am new and was given an old dj mixer, the usb light is flashing and the device is not recognised by my PC, I have mixxx DJ software, I also don't see any NI drivers in the PC device manager. When the usb cable is connected the device breifly lights up and then just shows the flashing usb symbol. I have tried different…
-
Enabling flux mode in loops
Hi! I have been really enjoying using Traktor Pro for the past two years (version 3 and then later 4). I use it with either mouse/keyboard, or a Numark Mixtrack Pro 3 and a midi mapping file found off the internet and edited to fit my needs. However there is something that has always bugged me about loops and flux mode.…
-
NTKDaemon has failed to start. I have done EVERYTHING!
I have done everything from reinstalling multiple times to going into gpedit and adding user policy privileges, I don't know what else I can do! Has anyone run into this issue before?
-
How can I uninstall Ozone 10 without being told to repair it?
I uninstalled Ozone 10 Standard via the Window 11 Aoos > Installed Apps setting. Unfortunately, Native Access now keeps telling me to repair it, and I don't see any option to make it stop. What's the correct way to uninstall the Ozone 10 that came with Komplete 14?
-
Native Access wont download nor update any plugin
For a while now, native access does not update nor download any plugins and simply shows the error "Download Failed". My Guitar Rig 7 Player is "installed" but doesn't appear in my FL Studio 24 and Native Access doesn't let me repair it. I'm using Windows 10, FL Studio 24 and the latest version of Native Access. What can i…
-
Kontakt keeps crashing on startup Windows 10 (Standalone and VST)
I recently started experiencing an issue with my Kontakt 6 Full installation, it crashes instantly on startup, whether in standalone mode or as a VST. I all started when changing the ASIO device on day, and suddenly it crashed. Strangely, it never worked again after that. I’ve tried uninstalling, reinstalling, and even…
-
Kontakt: Rescanned my folder, instruments disappeared
I have been trying to solve my problem with the support, but they're asking same questions again on an endless loop, so I'm turning to find help from the community. I was running Kontakt 7.6.1 and had several instruments installed to my "F:\NI Libraries" folder via Native Access. They were properly shown in the Library…
-
Longer backspin with Kontrol S2 MK3?
Hey there! I'm the proud owner of a new S2, but one thing that's been bugging me is that I can't figure out how to get a nice, long backspin like what happens when you use the mouse on a track or like you can easily do with the S4. I've tried adjusting the jogwheel sensitivity, but that didn't change backspin length like I…
-
No Instala el Kontakt 8 Player
No se que susede pero no instala el Kontakt 8 Player y solo se queda en "Installing", pero nomas no instala nada.
-
michael
I had my windows refreshed re installed and had forgotten to tell them to save any maschine mk3 info. When I hooked it back up my maschine wouldn't work. let's me DL native access but computer doesn't see my maschine.
-
Lost Authorization Key for Traktor FS2 / Final Scratch 2
Hi. I have lost my Authorization Key for my Traktor FS2. My Serial Nummer: [Removed by Moderator] My System ID: [Removed by Moderator] How can I create a new key? Can anyone help me please? kind regards Larry
-
Maschine Mikro MK3 screen is busted. How can I view its information on the Maschine software?
Hi everyone! I have bought a used Maschine Mikro MK3, which have a very dull screen. After failed attempts to fix it, now the screen is "officially" broken. I can't seem to find the information displayed by the screen anywhere in the Maschine 2 software. For examples, in Keyboard mode, the small screen shows information…
-
Traktor 4 on Windows Tablet
Hi, I'm considering buying a Microsoft Surface 9 for Traktor Pro 4. I'm not a fan of laptops, and the tablet itself looks better than a laptop 😉. I have two X1 MK3 controllers and turntables for DVS. Most functions are mapped to MIDI, but I want to handle track search and smart playlists using the touchscreen without a…
-
Manual download links
Is there a place where we can access links to manually download applications, previous update versions, etc. I know some support fellows can often share the required link or whatnot via google drive but if this isnt available I feel it should be honestly. I cant remember the last time i've seen a website or company like…
-
Can I move .nkx files to another directory?
As the title says. I want to move these huge files out of my "documents" folder on the C: drive because they're hogging space and I can't install other content (to say nothing of being able to install anything else that automatically goes to C:). Can they be moved somewhere else such as the drive that I use to hold my…
-
Kontrol S4 volume
When I adjust the volume on Deck A, Deck C volume also adjusts, at a slower rate. How do I remedy this?
-
Easily add tracks to your collection
Hi everyone I would like to know if there is a method to easily add tracks to an existing collection without reloading it every time. I use the macbook for dj sets but to fix the beatgrid and new purchases (even 40/50 tracks) I use my windows desktop pc for convenience. So every time I go to add my new tracks on the…
-
production installation problem
my copy of Output's Signal is not showing in Kontakt's browser can you help?
-
Error messages on update installs and deinstalls in NA
Hello dear community, I've written about this subject before and stiil can't find a (or better THE) solution, so help… please! I'm using the latest version of Native Acces on a Windows 10 machine. Every software update I get an error messsage (screenshots in this msg). I then have to uninstall the to be updated software…
-
Komplete 8 Ultimate Transfer To A New System
Hello, So basically my issue is this. I was working with a very old setup and I was running Komplete 8 Ultimate with Kontakt 5.8 I believe? Not 100% sure, but anyways it was an old setup that I decided to run into the ground. Well, it finally hit the ground, so my question is this. I want to transfer all of those Komplete…
-
Adding and making user presets for an instrument accessible directly through my keyboard?
So the situation is basically this. I'm trying to change the settings for one of the presets in native instruments west africa. Specifically the mapping setting from authentic to chromatic. However, I'm completely blind and for whatever reason this isn't mapped to any nks control, so I have to get sighted assistance just…
-
Sound Breakup/crackling problem
Gr6 & 7 I am getting severe crackling when I use GR6 or 7. Dell Inspiron PC, Win 11 w/ Intel(R) Core(TM) i5-9400 CPU @ 2.90GHz. At first I was just using standard PC speakers (USB and rear speaker jack) Used for yrs. w GR6 (7 kept shutting down unexpectedly so I eventually gave up on it but today it's been up most of the…
-
Maschine MK3 Software Missing.
I Just Bought A Maschine MK3 And I Dont Know If The MASCHINE Software Is A Seperate Download Or Thing But I Have Downloaded The Complete Starter Kit But Nothing Shows Up For My To Input Anything Because I Dont Have The Maschine Software Itself. I Am Brand Spanking New To This And Completely Lost On What To Do And Where To…
-
NKS compatible "Spitfire Audio Plugins" no longer shown in "Komplete Kontrol 3.0"
Since Update 3.0, NI-compatible Spitfire Audio Plugins are no longer displayed in the "Komplete Kontrol" browser. Does anyone have the same problem? I think the browser only shows KONTAKT content. I have now downgraded to KK software 2.94. After that everything was back. I hope Native Instruments and/or Spitfire Audio find…
-
Error changing pad color?
As I am working through a project, I will select a pad and change its color when I add the instrument/one-shot to it. Randomly, unless I am activating a setting that I don't know about, instead of changing the color of the selected pad, it changes the color of every pad in the group. I will provide 2 images to show what is…
-
Why does License transfer take so long?
Hi, everyone! Well quite recently I sold my Maschine MK2 and on the day it was sold I requested a license transfer… In the email it was mentioned, that the transfer would take a maximum of 48hours which for the time being wasn’t the case… So I’m wondering, does it always take this long to do a simple license transfer? I’m…
-
Komplete Kontrol Plug In wont appear in DAW
Hi. So I have what should be an easy question but it has been frustrating. I am using Ableton as my DAW and I can not get the Komplete Kontrol plug in to load in. I have made sure that it is properly downloaded, that the file is in the correct vst folder, and have even uninstalled and reinstalled but still it does not…
-
Battery Crashes when accessing Edit->Preferences->Library (Crashlog provided)
Hi, as the title says Battery crashes upon trying to access Edit→Preferences→Library. The following steps have already been taken: Uninstall Battery (removing all residue files manually as well) Uninstall Battery Library (removing all residue files manually as well) Reinstall Battery through Native Access - Update Battery…
-
How to access my Kontakt 6.6.1- libraries in Windows 7
Hi there, Are there any news about how to access and implement just bought Kontakt-6.6.1-or-lower-libraries in windows 7 ? Thanks!
-
Can't install Native Access due to unable to uninstall NTKDaemon
I deleted all NI related folders, uninstalled everything in Control Panel, neither worked.
-
Maschine+ Not Detected in Native Access
Hi everyone, I’m having trouble getting my Maschine+ to show up in Native Access, even though my serial number is activated. I’ve tried the following steps: Checked the USB connection Updated Native Access to the latest version Restarted both my Maschine+ and my computer Verified permissions for Native Access Despite these…