-
Maschine Mikro MK3 Stuck on ‘Busy… Loading?’
Hey all, this is an issue on two separate PCs (windows 10 and windows 11). I think I’ve drilled it down to Kontakt instruments.. Basically, when I try to load a Kontakt instrument from the browser on Maschine 2, my Mikro MK3 screen shows ‘Busy… Loading’ forever, and I have to close Maschine 2 and relaunch to get it…
-
no more connection to my MiniFreak Synth via Midi (USB)
I have Maschine MK3 and Komplete Kontrol S61 MK2 and an Arturia MiniFreak Synth all connected via Midi/USB to my PC (Surface Studio). Until now, everything worked fine: Midi-Out (Group H, Pad 1, where I have the MiniFreak V loaded) was set to 'MiniFreak' Channel 1, MiniFreak listens on cnannel 1. Audio Out from MiniFreak…
-
Maschine-NI DAW
I was surprised not to find this topic in a search of the forum, so I am posting it here. First of all, I am a longtime user of NI software products, and a new user of Maschine. I know that Maschine has varied uses, but based on an intense period learning Maschine, and perusing many forums, and watching many videos, it…
-
How to avoid VST Scan on Maschine SW?
Is there a way to bypass Maschine software from scanning vst folders every time it opens? Takes forever to open when you have a ton of different vsts. Would like to be able to run an initial scan and then just run a manual scan anytime you make a change.
-
Can't drag&drop sounds in a group
Re Maschine 2 v2.16.1 On this page of the NI documentation In the Moving Sounds section it says I can move/rearrange sounds in a group by: Click and hold the desired Sound slot(s) in the Sound List or in the Pad view. While holding the mouse button, drag your mouse toward the desired location in the Sound List or in the…
-
How to fix this? - Maschine Plugins missing
I have only just began to use maschine and I started making a certain track on my computer at school. Unfortunately, I no longer go there and I took the project home to complete, but these plugins are missing. Does anyone know what they are and how to get them on NI? Thanks!
-
Maschine 2.18 VST3 unable to load embedded Maschine Project in Cubase
Using the Maschine 2.18.0 and 2.18.1 VST3, Cubase does not load the Maschine Project embedded with the plugin if it was created with Maschine 2.15.2 or older. The embedded Maschine Project loads fine when using the Maschine 2.16.1 VST3 plugin. Project is loaded with the Maschine 2.18.1 VST3 plugin, if the Cubase project…
-
Automation, Again
Hi guys! Been mixing a song with my Maschine Jam, managed to pull out and record the automation I wanted. Now I am struggling to record more automations, the touch strips on my Jam do not apply any Filter now that the first automation has been recorded. I also tried to set up a new Performance Filter instance, but still,…
-
Display full name of sounds in the sound list
Hi NI people, I am learning Maschine Mikro mk3. I wonder if there is any way to display the full name of a sound in Maschine 2. I cannot expand the Sound List area, neither I cannot see the full name of a sound in the mixer. Any way to make it visible or to activate some tooltips when we hover over a sound slot? Thanks for…
-
Maschine 2 activation via Native Access fails
Hello, NA shows Maschine 2 as DEMO status, but I purchased it, and can see the serial number in my account. In NA, when I click on "Open"/"Activate", the window closes immediately. I can run it in demo mode. I have tried some of the suggestions here; either no effect, or NA shows a "!" in NA. How do I get NA to "see" the…
-
Interfering signal appears when I use the internal Audio Plug-In in Maschine 2 SW
Hey everyone, I recently noticed that when I open Maschine's internal 'audio' plugin and select 'stretch mode' as an engine, there's an interfering signal on the left channel. I've tried different versions of the Maschine software, but it appears every time. It's very subtle, so you either have to turn up the volume to…
-
Maschine software sounds category
Just a heads up to anyone using the sounds category, I seem to only be able to see tagged presets I have if i click on an expansion, otherwise if none is selected, then it wont bring all of them all up at once, only a small portion. A bug in the software I think…
-
Should the Mixer Button on Maschine+/MK3 Trigger the Mixer Panel in Maschine Software?
Hey All, Just getting used to the new workflow of the Maschine+ and was wondering. Am I missing something? Should the Mixer Button pull up the Mixer Panel in the software? To be clear, the hardware (Maschine+) changes to a mixer view, but the software remains unchanged. I've noticed when I push other buttons (ie. Sampling)…
-
Maschine 2 and chord generators VSTs
Hello everybody I wanted to integrate a chord generator VST in my workflow within Maschine 2. I installed Harvest Mini and Chordjam Trial and even modifying MIDI in/out none of them work. I then red that Maschine 2 as a DAW is not capable of running Chord Generators VSTs. Is that true? Is there any other chord generator(s)…
-
There HAS to be a way to STOP Maschine from scanning EVERY plugin on start up
Guys, I am at my wits end. I love Maschine but I loaded it literally 8 minutes ago and it's STILL scanning every plugin on my machine. It does this every time (this time is particularly slow) and I really need it to stop. I have unclicked EVERYTHING I can think of to stop this madness. I run a Windows machine and do not…