Logic Pro
Discussion List
-
Why does Logic Pro not recognize my MIDI
So I have a Maschine Mikro MK3. I've mapped it up with Superior Drummer 3 samples via Controller Editor. (I followed this video to set it up, though the device in the video is not a micro mk3:https://www.youtube.com/watch?v=WhTXrW3TLpc&list=PLKcmYeWwfFWj7gDPD2nVdhBvm1hIN6S75&index=13). That part is working great. However,…
-
Why does my MIDI mapping get changed when I connect to Logic Pro?
I have a Maschine Mikro Mk3. I'm using Superior Drummer 3 and trying to run it through Logic Pro. I'm brand new to MIDI and so I've been getting stuck a lot. I've followed this video and it has helped. https://www.youtube.com/watch?v=L7Bj58vQ2WM&list=PLP4WDU63v24GYd7i4srN-is6013WVO8cg&index=6 However when I get to the one…
-
Use Maschine + in Logic - WHAT I'M DOING WRONG??
Hi there, finally I got my Maschine + and played standalone a little bit. I did some projects on it and saved it on my Maschine +. I would now like to process the projects in Logic Pro X. I have built a template as follows: SET UP A THE MASCHINE 2 INSTRUMENT AS MULTI STERO: CREATED 15 CHANNEL: SET EVERY SOUND TO A CHANNEL…
-
Why can't I see Kontakt in Logic?
I recently bought a Teletone Audio library. To use it I need Kontakt Player. I followed all the steps correctly without undue difficulty, including downloading Kontakt 6. I have Logic Pro 9, and for some reason, no matter what I try Native Instruments Kontakt is not showing up in Logic. I have: Made sure I downloaded the…
-
Maschine Jam and Mapping with Controller Editor Query
Greets: I am close to getting the Mschine Jam I have to working again as a control surface in MIDI mode with Logic. But something caught my attention and I could use some guidance to resolve this. Awhile back, I have taken the Mackie Control Light template in the Controller Editor and made some modifications to it, adding…
-
Maschine Plus as a controller in Logic
As mentioned here https://support.native-instruments.com/hc/en-us/articles/209582749-Setting-up-Your-MASCHINE-Controller-for-Host-Transport-Control-in-Logic-Pro "Logic Pro is automatically configured for advanced integration with MASCHINE MK3". Does the same apply to Maschine Plus? I haven't found a way that Logic…
-
Kontakt 5: unable to see external hard drive music libraries on Kontakt within Logic Pro X
Hello! I looked through multiple channels and it seems I'm out of luck. I just upgraded to an MBP 14 M2 MAX and transferred everything over. The transfer was not too complex but now I'm stumped. When I go to "Files" in Kontakt (through Logic Pro X), I see my external hard drive. But the external drive doesn't list any of…
-
No sound from Logic Pro X
Hello, I'm new to the Native Instrument ecosystem and I'm having a problem recording into Logic Pro X. I select Kontakt as the plug-in. I's using the West African drums. There is nothing happening when I record. It appears to be creating a midi track but when I play it back there's no sound. It will record the sound of the…
-
Kontakt opens/glitches as a small window briefly before opening normally in Logic
I started getting this behavior after I reset the Application location in Native Access (which was showing me an error, so I followed steps to fix it). It flashes this window briefly almost as a stutter, glitch effect then opens the main window. Kontakt still runs fine once it's open, but it's a bit jarring and I'm hoping…
-
Kontakt 7.1.3 and 6 crash after exiting Logic Pro
I am using Logic Pro 10.7.5 on a M1Max Macbook. I see crash reports in the Mac console every time I exit Logic. They tend to go this way Thread 0 Crashed:: Dispatch queue: com.apple.main-thread 0 Kontakt 7 0x2919cfb94 NI_6_3_1_R2::QApplication::~QApplication() + 820 1 Kontakt 7 0x2919cfad8…
-
Lost my Kontrol of instruments within Logic
Hi guys. I've been happily using "Modern and Massive" and "Invasion" in Logic Pro X for a while now, but I have recently hit a snag. I use a NI Komplete controller, and I love the colour coded keyboard that lets me know where the drums and cymbals are; it's awesome. However, recently I cannot open my GGD instruments in…
-
Where do I start with Komplete ?
Hi. I am a Komplete novice. I am overwhelmed with all the "software pieces" and trying to understand where to start with learning how to configure and use the hardware with my DAW. I have an Apple computer running Mac OS X 11.7.3 with Logic Pro 10.7.4 I have a Komplete Kontrol A25 keyboard connected to my computer via USB…
-
Play & Record button doesn't work - Logic Pro x
Hi, This might be a silly question, my play & record button don't work on the controller. I'm trying to set the controller up in logic pro 10.73. Id like to be able to press play & record on the Mark 3 controller. I have a Komplete Kontrol set up and that all works fine, i have to press record on maschine first then play…
-
Logic 10.7.7 and Kontakt 7
My Macbook updated Logic Pro to 10.7.7 over night When I now try to use an Instrument from Kontact, Logic Pro seems to default back to my Kontact 6 rather than Kontact 7 - which is no longer in the Inspector section of Logic Pro - that I have been using over the past couple of months. Can anyone help me with a way of…
-
Can't Map knobs on KK M32 to a multi output instance of Kontakt 7 in Logic Pro
I've tried right clicking and using the learn mode while pressing SHIFT and PLUG IN on my hardware and no go. Any pointers. I just want to make the most of my KK M32 and do not use Komplete Kontrol software as you can only have one instrument in each instance at a time, and not to mention theres not keyboard preview as in…
Popular Tags
- Traktor Pro 3 1,056
- Kontakt 6 967
- Maschine 2 SW 669
- Native Access 589
- Maschine MK3 579
- Maschine Plus 557
- Komplete Kontrol SW 495
- Kontakt 7 437
- Feature Request 393
- Reaktor 6 283
- Native Access 2 235
- Bug 222
- Mac 216
- Traktor 213
- Guitar Rig 6 210
- Maschine 210
- Komplete 210
- S4 MK3 208
- Logic Pro 203
- Ableton 200
- Komplete Kontrol Keyboards 182
- Kontakt 165
- Battery 4 164
- Windows 161
- Apple Silicon 160