-
Why does Traktor Pro 4 crash when I load a stems file I generated?
Hi guys, are you aware of this issue?
-
what happend to the Traktor-product-section on NI-homepage?
hi there, installing my new PC, and during waiting for all those GB/TB of installation I wanted to read again something about my beloved S4Mk3, but what´s this?? there´s only F1 & Z1 left and the other category-buttons show average 1 product 😲 is there something (negative) happen during my pause from January till now?…
-
Trouble streaming with the S4.MK3
ok this is how ive had to set things up To use the S4/Mk3 to play vinyl the settings are at the s4 on Traktor3. To use one of my computers {Imacs} I go to the line in and the settings are the s4 on Traktor3. I have both computers in my line in C&D line Now to be able to stream using one of my iMacs, I have to make an…
-
Kontrol S4 Mk3 – screens freeze when laptop screensaver on, or Traktor app is not visible
I have a brand new Traktor Kontrol S4 Mk3. It is fully updated and has latest 0.6.1 firmware, I'm also running the current Traktor Pro 4.0.2. My problem: the screens on the S4 "freeze" and don't update when Traktor app is not visible on the mac screen. This is really frustrating and misleading, e.g. the track might be…
-
Variable beatgrid bug (deck going crazy)? And where are the variable beatgrids saved?
Hi, I've had this issue 3 times so far, so I think it must be a bug. After panicking the first time for 2 whole minutes I found a quick fix. After loading a track with variable beatgrip to the deck and pressing play, that deck then goes crazy, goes faster or slower, and the beatgrid is totally off in sync, or without sync.…
-
No Midi Mapping for S4 MK3 - will this be fixed?
I upgraded a little while ago from the S4 MK2 to the S4 MK3 and have now lost the ability to midi map the controller with one of my favourite pieces of software. I trust you're away of this NI - is this fixable? Will this be fixed? It is certaintly disappointing to upgrade and lose a feature such as this ability. It seems…
-
Kontrol S8 Activate preset loop & Traktor 4 Beat grid
I'm not new to Traktor, but I am new to the Kontrol S8 and I have a question about it. Question 1: On my other controller (a Pioneer DDJ-SZ) I could activate a preset loop, so that when the track gets to that point, the loop would start automatically. To do this, I had to press Shift+ Loop. Is there a way to do this with…
-
Free Pro4 Upgrade with X1 MK3
Hi folks, this is my third attempt to resolve this, so any help would be greatly appreciated. I recently purchased Traktor's X1 Mk3 from my local Dj Store, which came with the free upgrade to Pro4. There is no clue in the box how to get this upgrade. I have reached out to NI via email twice. Crickets. Can someone please…
-
why is the sound co;ing thru when loading a new track and the fader is down ?
pre listening is not possible until you move the fader a little bit up and down. then suddenly the system like to remember the settings and give no more sound to the master output. it happend on a gig and was very disturbing. normaly you can listen in you're headphone so the people dont hear what the next song will…
-
how do i transfer product from a person who had passed away?
a friend gave me a traktor scratch a6 and before i could get a transfer id from him he sadly passed away. is there any way to get one now?
-
Traktor PRO 4 aka The badest update i ever seen....
Stems separation is terrible : U have to pick song one by one for select " stems separation" (thanks for my 3k songs…). For 100 songs, he needs like 2-3h for convert … just imagine for 3K tracks. AND when u take the time for ping all the song u need to convert, Sometimes tacktor crash…. THANKS NI <3 ….
-
iOS 15
Does updating the iOS 15 Sequoia version affect traktor pro version 3.11.1.17?
-
Traktor Pro 4 bug or setup issue on the mixer
Dear all, I write this request as I updated my license from pro 3 to pro 4. Unfortunately, when I want to mix 2 songs. I put my fader in the middle and never change it. I launch my first song on the deck 1 with mixer on the top, but when I drag and drop my second song on the deck 2 and I want to listen it in the headphone…
-
Any way to make custom mode mappings for X1 MK3
Had my first gig on the weekend using the X1 MK3 as a midi mixer. It's a really nice piece of kit. The X1 MK3 has two modes: FX, and mixer. I was wondering if there's any ability for us to create our own modes and midi map them. So I could switch between FX, Mixer, and a Stems mode. Right now if I setup a custom midi…
-
X1 MK3: How add a new mode page to mode select button ?
The mapping that came with the controller x1 mk3 ( firmware 0.2.7) is very poore, so, how can add new modes pages to the mode select button at device top to access different section of traktor, for example, the looper, the recorder, maybe one full deck parameters like filter, gain, master tempo, one page for remix decks,…
-
Broadcasting to Shoutcast
Can someone help me to connect Traktor pro 3 to my Shoutcast Server?. I entered the information into the broadcast portion of the Traktor Pro Software however it doesn't seem to be broadcasting the music that is playing. Thanks for any help you can give me.
-
TR4 Route Output to Macbook Headphones
I am soon traveling on a long haul flight (lucky me). I would like to use this time to do preparation work such as setting variable beat grids etc. Using my laptop ONLY. I have not been able to route the output of TR4 to the headphone socket of my Macbook Pro running Sonoma 14.6.1. And I don't want to disturb my fellow…
-
Traktor Kontrol S3 Stand - 3D Printable
Hi guys Thought I'd share my 3D printable Traktor S3 stand which I designed… https://makerworld.com/en/models/644502#profileId-570575 Happy printing, enjoy!
-
Traktor Pro 4 Beta Tester Spotlight: Zephry
Meet Zephry, the most active beta tester for Traktor Pro 4. A familiar face in our community, @zephry has played a crucial role by providing invaluable feedback and helping us fine-tune the latest updates to our software. In this interview, we explore Zephry's journey with Traktor and dive deep into his experiences during…
-
Let us stem separate multiple files at a time!!
Traktor 4 is great, but the Stem separation analysis process is ridiculous. Why can't I highlight multiple files and set Traktor to perform stem separation on them all? When you highlight multiple files and access the right click drop down menu, the "generate stems" option disappears. That's a huge oversight in terms of…