-
Traktor S2 MK3 keep turning off
I’m using S2 MK3 with Traktor 3. It turns on and turn off after a different amount of time anytime.. Sometimes when I unplug it and replug it works but not most of the time. I tried to reinstall the controller editor, the S2 MK3 updater and I check for updates in Native Access. I restored the setting of the S2 MK3 to…
-
Screen problem
Hey I need help with the equipment, maybe someone has had this problem... It's about the displays in tractor s4 mk3 when I start playing music it displays everything normally, but when it goes for a few minutes the displays (both) freeze and you can't do anything. the knobs around the displays work normally, only the…
-
Audio 2 DJ
Hello guys! I am using a Traktor Audio 2 MK2 with Macbook Pro 2017 with OS Ventura 13.7.1 Sometimes appear message that says if I update the Mac OS to Ventura 13.7.1 the Audio 2 will no longer be compatible. The update is available on my Mac but I am afraid to update it. What is your suggestion?
-
audio 10 bug often at pc start on windows 11
hello, I have this bug since Windows 8, I had it on the 10 and again on the 11. This bug is only present at the start of the pc. It arrrive that I start my pc for 15 days without the problem and suddenly it starts again. I just installed windows 11 and it’s the same. On windows 11 the bug is even more present. When I start…
-
Time-Stretching (Key Lock) awful quality problem
When using 16 bit 44.1 kHz FLACs I can clearly hear that key lock is causing massive muddiness of high pitched transients and kick. It's noticeable even on +0,1% of pitch. Playing stems is where horror story begins. Since they are AAC on 256kbps it's so bad that I had to map pitch reset button on my S4 MK3 that I…
-
Z1 MK2 Mapping
Hello all. I'm trying to overwrite factory mapping in my Z1 MK2 but Traktor doesn't allow me to do it. Do you guys know if this device can be remapped? Thanks
-
Ext Line input gain increasing automatically randomly
Hi all. I have just move from Macbook Intel to Macbook with M1. After that change, when using the EXT Line with another computer while playing tracks on other decks with Traktor 3 , the gain of the 4th channel, comming from another laptop, increase automatically after 5-10 minutes playing and the gain button is not…
-
Traktor Support: "it is not feasible to keep tickets on hold indefinitely"...
Traktor Support: "it is not feasible to keep tickets on hold indefinitely"... So… we'll call it "SOLVED" even if nothing has changed and your problem is still a thing. This way we keep our SOLVED quota up, and no one will ever remember you had a problem. Thanks Native instruments.😐️
-
two traktor controllers
two Traktor mixers/controllers and one version on Traktor Pro 4, csn this be done? I would like to use my S8 controller with my turntables however the S8 is not calibrating both turntables, and nothing I've tried to address this has worked, so how might I run my Z2 mixer to control my two turntables for vinyl/dvs djing,…
-
Error message, panicked, have 3 hours to fix this
I'm getting the error message "file could not be due to missing or corrupt file…" I used the "Relocate" fix from the support pages. It worked for when I did it but mid-set as I was spinning later, I was getting the same error message. Not a gig, just at home. Important note: The songs that aren't working were all uploaded…
-
Beat not in sync with visuals
Hi. I recently had Traktor Pro installed on a laptop and when I loaded any tracks from Beatport, I could just play them immediately and they were synced. I created mixes with comments on each track so I knew where to start each one etc. I've a new laptop and installed Traktor Pro again, and it's a mess. I've tried mixing…
-
Traktor Pro 4 with Denon MC3000
Hello everyone, I can't connect my DENON MC3000 controller to Traktor Pro 4, even using the similar options of Traktor Pro 3 Indeed, with Traktor Pro 3 everything works With Traktor Pro 4 the system does not recognize the drivers and Asio to use the MC3000 Did you have the problem? What solution do you recommend because I…
-
traktor pro 4
i have paid for the upgrade to use traktor pro 4 - but when i try to install it, it keeps failing HELP
-
will an s4 mk2 work with my m2 macbook air on the newest os
im looking to buy a traktor s4 mk2 as i bought an s2 off ebay but was sold a broken one and ripped off by the seller and ebay when i clearly showed it arrived in pieces but apart from that the left jog wheel wasnt funchtional at all. the unit is a mk2 and it does work but before i spend my money i need a straight answer…
-
D2 Controller knob
The D2 has two touch-sensitive knobs, is there a replacement for this? I haven't been able to find one yet. Thank you very much
-
Windows 11 Freezing
i have a new Asus vivobook and Allen Heath Db2… i was running window 10 on my old Lapto a Dell 7240 without any issues … Now the Asus with windows 11 and Traktor 4 randomly freezes up while djing… and doing live radio work… i am using the usb 2 ports on Asus if you power mixer off and back on it starts again, very strange…
-
traktor kontrol s5 shift brings up template screen? how can I fix this??
So when i hit the S5's shift button, it takes me to the template screen, the same as if i press the gear button next to the screen. I can not do things like delete cue points! PLEASE HELP! This dude has the same issue and the discussion was closed, WITH NO RESOLUTION!!
-
Traktor Pro 4 Left Deck Volume Issue
I have Traktor Pro 4 running on a M2 Pro / Sequoia 15.0.1. Everything works fine, but I notice that the left deck's audio is lower and less dynamic sounding than the right deck. Is anyone else having this issue? Could it be an issue with Sequoia? Thanks.
-
TRAKTOR AUDIO 6
Good day, everything is fine in the new year, I have a problem, I bought TRAKTOR AUDIO 6 a while ago, I gave it to a friend and he only gave me the sound card back, I don't have the installation codes for the Traktor, how do I find them so I can install it, I have the serial number, thanks for the answer
-
23c xone mixer with Traktor 4
I recently upgraded from Traktor 2 to 4 and my Xone 23c does not work correctly anymore. Timecode only works on one deck at a time and my crossfader does not cut off other line if volume is up? any suggestions?