-
How to change page in TRAKTOR KONTROL Z1 midi mode
Hi! The controller editor documentation stated the Z1 has unlimited midi pages. How do you cycle through the various midi pages when in midi mode? Thanks!
-
Problem with filter reset on Traktor S2 MK2 with Traktor Pro 3 software
I have paid to upgrade to Traktor Pro 3. I have scanned the forums and found these articles which describe my issue. https://community.native-instruments.com/discussion/10404/pressing-filter-knob-doesnt-jump-back-to-the-middle-default…
-
Deck volume midi mapping in external mixing mode
Hi, I need to know if it's still possible to map deck volumes although in external mixing configuration. Long ago i was able to do it (i remember well, because i could modify volume both from my m-audio xponent and mixer, using an audio8 in external mode). I need it for an important project i made for a friend of mine. If…
-
Xone 96 as a traktor MIDI controller?
Hi once I had connected the pc with mi mixer Allen & Heath xone 96 and when I pushed the filter button the track in deck a was restarted, so I know xone 96 can send and receive MIDI signals to traktor but the problem is that I don't know have to map the mixer in traktor somebody knows?
-
QML: encoder.is_turned
Hi - is there a way to determine the direction the encoder is turned?
-
Maschine Jam to Traktor DVS
Eyoo! Anybody know how to mapping sounds in Maschine Jam to use it live in Traktor with DVS? Can somebody to explain me?
-
Problems with loop functions in Traktor mapping
Hi all! I recently acquired an Allen & Heath Xone K2 that I am mapping to be able to play 4 decks. I play hypnotic techno, so the main DJ functions I use are loops. I'm having trouble mapping loop functions, specifically loop in and out, loop size, and changing the location of where the loop starts. What are those…
-
How to map Led in traktor pro 3
Hello I would like to know how to map a led ring light on my midi controller to light up and stay on when I activate the FX 1 effect in traktor pro. I have managed to make the light light up whenever I press the ON button for the FX1 but I can't make it stay ON . It just flashes once. The midi notes of my controller for…
-
How to assign the Traktor CUE switch to a button on the Kontrol X1?
Hello, I'd like to assign the cue toggle buttons (deck A/B) in Traktor to buttons on the Kontrol X1 MK1 but I'm not sure how to do this. I've attached two screenshots – the first one shows the cue button I'd like to be able to toggle on/off using the controller, and the second one shows an assignment that already exists in…
-
I need a custom Mapping for my S2 MK3
Hello I am looking for someone who is experienced in creating mappings and can create a special mapping for my S2 MK3. Basically, everything should remain as it is. The only thing I would have liked to change is: The pad mode that otherwise saves the hotcues should be "FX-Pads" instead. (just like the "FX bank" on the…
-
Mapping Denon MC6000 mk2
Hello, can someone help me with a mapping? Traktor 3 pro and Denon MC6000 mk2 controller. I would like to have the cue button light up once the track is loaded in the deck and the button should flash 30 seconds before the track ends. How can I achieve this? Thanks Hallo, ich spreche leider kein Englisch. wer kann auf…
-
vms4 mapp
Hi all, please I would like to use my American Audio vms4 controller again after a long time. Is it possible to have a mapping table to understand the assignment of the commands to the various potentiometers and keys? Thank you.
-
Can't load X1 custom mapping: "there are no mapped controllers", the X1 doesn't seem active
Hello, I am trying to load a custom mapping for Kontrol X1 that I downloaded from this forum. I have been using this mapping for two years without issues on both my desktop and laptop. However, I had to completely uninstall Traktor on my desktop, so the settings were lost. Now, each time I do the fairly simple steps of…
-
Traktor pro3+DDj-flx6+3 modular traktor (X1,Z1,F1) MIDI setup
I have setup a midi configuration to all this give it a try and import just try to find better way for merged fx You can config with any other
-
Z1 mapping to control 4 decks
Hello everybody. I'm a such a dumb but I can't let it work with the mapping I found online: https://maps.djtechtools.com/mappings/5111 even because the installation instructions are very poor. is there anybody who solved the 4 decks control somehow? I'd really Appreciate your help! THanks Angelo
-
Mapping S4 with SORT BY
Hi, is there possibility to map 3 buttons in S4 MK2 controller to have 'sort by artist, 'sort by title', 'sort by bpm' ? Thanks!
-
Automatically Shut Down All Effects On Startup! (TSI)
Hi there. To all of you who uses any kind of Instant Gratification type of mappings (Midifighters/TekkenF1/Pad FX), you can now shut down effects automatically with this mapping tool. Best, Stevan
-
Allen & Heath Xone:K2 16-Step Pattern Player
Check it out if you have K2 or K1! Requires TRAKTOR Pro Plus and 3.8 or newer version. This is first in a series of Pattern Player mappings that I am going to build for several controllers that I have available and can accommodate the Pattern Player nicely. Current version is V2 and for the next version I will create fully…
-
Traktor Pro Plus with XOne PX5 and K2 - stil frezzing mode
I had a problem with my hybrid setup – 2 x pcs K2 + Xone Px 5 Mikser + Traktor Pro Plus + MacBook Pro 16 Ram I 7 Intel – system Mac Big sour Where is the problem – playing set the K2 after 15 min / 25/ or 45 min are going to „Freez or sleep mode” – it means that the traktor can’t be control by K2 – all the lights, pads are…
-
TRAKTOR MIDI Assignment Help
Hello I want to map these four buttons, but I can't find the correct MIDI mapping in the options offered by "Contoller Manager". I would appreciate if you could tell me what they are. Thank you so much