-
How can I fix it?
I just bought a b-stock Komplete kontrol s61mk2. All the keys work except F3 doesn’t make any sound when I push it. Fl studio is receiving midi from it just says midi note off when I push it. Also the light above the key lights up when I push except for when I am running it in Komplete kontrol software. Would this be a…
-
How to get sound
Have hubrid Modo Daw setup. All in worked correctly, ie Modo equipment, KK S88HD, Mac, Ableton Live11. Can’t get sound to trigger and tried everything one can imagine. Any tips? Thoughts? Thanks
-
S88 Mk2 without any screens - Not triggering Ableton Live 11 Daw - Mac
Hi all. I have a hybrid setup, i.e. Kurzweil K2500; Yamaha Montage; Roland XV5080, running through a MOTU Midi Express, routed through a samson s10, Apollo Midi Interface and the S88 MK2, the one with just buttons, no screen at all. Here goes: For the life of me, I cannot get the keyboard to trigger action on the Ableton…
-
Using Cubase - after Update Komplete Kontrol doesn´t find Instruments in older songs
This is very bad. Loading older Songs in Cubase, in every Channel, Komplete Kontrol has lost all instruments I used in it / had loaded. How can that happen? What could help or - how can I downgrade Komplete Kontrol to an older version (what is not comfortable).
-
KK midi sequence problem, Mac, Logic Pro X, MOTU XT, Antelope
Good morning everyone, I have an important question. Last Friday I configured the new Mac Studio with Logic Pro X (the latest version) and reinstalled all my hardware (Antelope Discrete 8 Synergy Core sound card, MOTU XT midi interface). I redid the entire installation of Ultimate Komplete 14 using the latest version of…
-
S88 MK3 Freezing all the time
Hello Everyone, Happy with my new S88, but I have a problem. Using it on my Mac Studio M2, directly connected on thunderbolt 4 port. It freezes 70% of times. I can use it 5 minutes for eg and when I try to change intrument, it freezes. But I can play the instrument. The app kontact 7 on mac is not freezed. It's the S88 At…
-
Aftertouch does not work in Form when Kontrol MK3 keyboard set to polyphonic AT
@Matthew_NI I am not sure how many other instruments this issue affects, or if it is primary problem with the Kontrol MK3 keyboards or if it is more of a problem for Reaktor instruments (or just Form). AT modulation does not work in Form unless you switch the MK3 keyboard to Monophonic AT mode. This is a hard thing to…
-
Komplete Start, doesn't include Komplete Kontrol
I tried an install for the first time, following the Native Access instructions I found on YouTube. I downloaded Native Access and it then says to install Komplete Control from the list of available software. However Komplete Control is not in the list. Does anyone have any idea what I should do?
-
KK software with non NI keyboard
Hi all, hope everyone is well. I was wondering if I could use a Novation SL 61 MK3 keyboard with KK software? Would it be recognised by KK and if so would the scale, ARP and chord functions be available? Many thanks.
-
Komplete Kontrol & Kontakt 7 not loading Programs on my Mac
Hi I've not had my NI System for too long , it was working fine before updating to the New Mac OS Sonoma . Since last October 2023, There's been Major problems even after loading, up in the last few weeks the latest NI New updated Mac fix onto my Mac , Komplete Kontrol & Kontakt 7 , Will not load up any Programs , and my…
-
Please update software for Templates so we can assign a Midi channel to Sustain Pedal.
Mods Anyone who purchased a KK Keyboard (A Series) thinking they could use it as a Midi controller is currently SOL. I did a pretty Komplete (sic) review of the keyboard before purchase. Seemed I could assign Midi channels through the Template functions - awesome - but clearly I should have read the fine print. Now outside…
-
Kontrol S88 Mk3 4 Light Guide Keys went out
Hi there, Had this keyboard for a month. Turned it on today and noticed the light guides for the lowest 4 keys are dead. Has this happened to anyone else? I have no idea what to even try to trouble shoot it. Seem like a failure. Thanks, Wade
-
Dual Blank Screens
I have dual blank screens when I load Maschine into Logic and attempt to use my Komplete Kontroller. I don't have the issue on my M2 MacBook Air just on my iMac 5K 2020 both running the latest available software for OSX and NI Can anyone Help
-
Komplete Kontrol problem [Duplicate discussion]
Good morning everyone, I have an important question. Last Friday I configured the new Mac Studio with Logic Pro X (the latest version) and reinstalled all my hardware (Antelope Discrete 8 Synergy Core sound card, MOTU XT midi interface). I redid the entire installation of Ultimate Komplete 14 using the latest version of…
-
Super 8 Does Load in Reaktor, But Does Not Load in Komplete Kontrol
Hello, I get this message when I attempt to use Super 8 in Komplete Kontrol. "Super 8 R2 could not be loaded, as it may not yet support Apple Silicon or VST2 to VST3 migration." However, when I attempt to use Super 8 in Reaktor 6.5.0 it works correctly. Is anyone else having this problem and or know how to fix it? Thank…
-
Default Piano problem
I've had this problem before and fixed it by rebooting, but now I can't get it to stop. I'm on Mac, using Logic. Playing Komplete Kontrol S49, in a MIDI track, even with no midi instrument loaded, I get a piano. If I load an instrument into the track, the instrument plays along with the Piano sound. I opened up the Kontrol…
-
Eastwest - opus libraries not visible on Komplete Kontrol
Sorry to ask about this again because it's been discussed many times. I can't get Komplete Kontrol to show East West libraries. It's not showing any. I've followed all the steps, downloaded the East West NKS patch, restarted Komplete Kontrol software, made sure all libraries are located properly, etc... but no luck. Any…
-
Komplete Kontrol is not recognizing my MK2 S61 Controller in the computer
I've been using the MK2 S61 Controller and it's worked so far until today. The plugins work because I hear sound and I can play them using my laptop keys, but my controller won't even show up under MIDI in the settings. I made sure everything was up to date, everything is plugged in properly and I haven't updated my…
-
How to remove library from Komplete Kontrol only?
I have a factory library that appears under the wrong vendor in Komplete Kontrol and would like to remove it solely, whilst keeping it visible in Kontakt. I am unsure how to do this without removing it completely. I am of the persuasion, that this will require me to edit some meta data, though would like to know if anybody…
-
Why is KK and K7 w/S61MK3 persistently crashing standalone and in three DAWs?
I have an open ticket with logs and while I wait for a response I'm keen to see if anyone has cracked this. I read one post about these crashes in Logic that was marked as answered, but it is not resolved. I'm a first-time user and unfortunately had Sonoma installed when my S61 MK3 arrived. Kontakt 7/Komplete Kontrol…