-
Blank Screen after installation of S88 MK3
Hi guys, I can't get my MK3 S88 to work. (It used to work perfectly, but new Mac and new installation doesn't work now) I am on the latest version of Sonoma 14.5, Logic Pro 11 and Komplete Kontrol 3.2.1 and Kontakt 7.10.4 - The S88 firmware was updated as well (Think it is 1.5.7 from 1.5.5) Neither standalone nor Logic Pro…
-
Komplete Kontrol S49 Mk2
I have an S49 Mk2 keyboard which I want to start using as a midi controller for GarageBand. Other than downloading the relevant driver, do I have to do anything else? Just wondering whether anybody went through the process or I would appreciate an advice from support Best Regards George
-
Can I control external midi hardware (hard synths) with the MIDI OUT from Kontrol S61?
I want to control both my virtual synths and my hardware synths at the same time with Kontrol M61. Connecting the MIDI OUT to a hardware synth does nothing. Why does it have a MIDI OUT if it doesn't work? Any help would be appreciated.
-
roblem with my sustain pedal MK3
Hello, I have a problem with my sustain pedal. I have the Komplete Kontrol S88 MK3. For about 6 days, the Komplete Kontrol software has not been recognizing my sustain pedal anymore. Other programs like Opus and Halion Sonic recognize it without any problems. I think it is a routing issue within the software. When pressing…
-
Missing features in v3.0 with S Kontrol MK3?
What's currently missing on S Kontrol MK3 using v3.0 software, as compared to MK2 using v2.0 software? I'm confused, because the manuals are separate. The manual acts as though the MK2 features (MIDI templates) are included in all of them, but clearly this is being worked on with priority by NI. Additional question: What…
-
Issue with Saving Presets on Komplete Kontrol
I'm not sure if anybody else has had this issue. Whenever I favorite a preset on Komplete Kontrol on the right-side browser, the browser scrolls to the top of the list. This is very bothersome as I am trying to favorite many presets at once and I have to keep scrolling back to where I was before for each new preset. Has…
-
White screen problem? Hello NI what are you doing there?
Today i spent few hours trying to make new gear to work, after tried to update device just get white screen. There is no any way to fix it with power cycles etc. I say to myself, is this real? Then i ended here and saw that this happened to more people… dont have time to fix something thar im bought new, so tomorow…
-
Looking for the previous Komplete Kontrol (before Browser Change).
The new Komplete Kontrol doesn't allow dragging and dropping Samples and Loops from the Browser to the Host/DAW. That's the only reason why I use it, and without this capabilities I'll never use any of the Expansion Content - for reasons that I think should be plainly obvious. It's still possible to Drag and Drop from…
-
Stop button resets Komplete Kontrol's first parameter
Hi, I'm having an issue with Komplete Kontrol. Whenever I press the stop button in Ableton (via spacebar, mouseclick, or keyboard button) the first parameter of the loaded instrument automatically sets itself to 0. (Ex: in Glaze, the blend is set entirely to A, in Arkhis, the 'layer' parameter is bought all the way down,…
-
My S88Mk2 triggering macros on/off by itself
Hi, In standalone this does not happen. However, after recent update whenever I load KK14 in Cubase 12 PRO as soon as I press 'play' - 'record' - 'stop' - 'metro' it triggers settings of any given loaded instrument. What I have found weird is that although in each instrument its a different feature (reverb here, tom volume…
-
Komplete Kontrol 3 Not finding 3rd Party NKS Plugins
There seems to be a bug with the factory scanning of Komplete Kontrol 3+. I have the latest versions of u-he, Plogue, and Synapse Audio 3rd party plugins installed (VST3 and NKS presets included) on my desktop (windows 10) and laptop (windows 11). I have the latest version of Komplete Kontrol installed on both also. Prior…
-
New Komplete Kontrol version, mild improvement on UI/UX, but missing the mark again.
I was so excited when I launched Native Access about 20 minutes ago and saw that there was a new version. I immediately thought "If they brought GUI zoom to Kontakt 7, not even on version 7.0.0 but later on 7.4.0, and this was months ago, they have to have brought it to KK, which is something that users have been asking…
-
Mounting S88 MK2 to a desk? Can I support S88 from beveled "lip" without support in middle?
Hi want to mount my S88 underneath my studio desk. After a lot of research and youtube videos one of the best solutions seems to be the bracket (see image attached). Due to clearance issues I don't want to put a full piece of wood/drawer underneath. Instead I would attach this bracket (with re-enforcement via a strip of…
-
Cannot update Komplete Kontrol S49 Mk1
Hey folks, I bought a new Mac Mini (comes with Sonoma pre-installed) and I've recently reconnected my Komplete Kontrol S49 Mk1 keyboard - the editor says it requires an update, but when it downloads it says it's incompatible with this version of the Mac. Will I need to wait till the firmware updates for Komplete Kontrol…
-
NKS migration is not working in Komplete Kontrol 3.21 , Arturia, Dune
Hi , I am on Mac M1 14.4.1 , I have Maschine 2.81 and Komplete Kontrol 3.21 installed. Unfortunately the latest versions of Arturia V Collection but also Synapse Dune 3.6 are showing in the browsers , but are not working in Komplete ( in Maschine it is working) due to VST Migration . Though the vst 2 versions are installed…
-
Kontrol S88 MK3 not working (Sonoma 14.5)
I recently updated my macOS from Ventura to Sonoma, and magically, my S88 does not seem to work in any DAW. It worked before. Boots up, key LEDs light up, but no MIDI input is detected in Cubase or Reaper (the latter being a test environment more than anything). I'm unsure if I need to fully uninstall all the software…
-
All software deleted itself from a hard drive
I have Komplete collectors' edition 14 on a seagate 1 TB drive. Haven't touched it- light is still on indicating it's plugged in. In the middle of a reaper session when it freezes. I end task. I open back and I get the notification: "One or more Kontakt instances cannot be recalled, etc." I restart computer, same error. I…
-
KK stops scanning my libraries
Bought a new keyboard and installed KK 3.2.1 stops scanning libraries (always) at a certain point. i use the newest version, tried 2.9.4., removed all the dbs a couple of times. to no avail. the scan icon is running, but the db doesnt grow any more - last libraries scanned were maschine drum sel and aas masala db size is…
-
Connecting s88mk3 to external hub
I have a separate power adapter for the keyboard and it powers up fine. My issue is with connecting to the Mac itself. When directly plugging into the Mac it works as intended. But when I connect through the hub through usb c it does not. When I connect to the dongle with a usbc to usb a cable it works. Other devices work…
-
S61 mk2 & KK v3, is this a problem?
I have been trying to incorporate KK in my Studio One and Bitwig Studio 5 workflows. Studio One will just abruptly close and, in Bitwig, my S61 will turn into a light show after so long. Do I need to revert KK back to version 2? I can't seem to find a definitive answer on this when I search Google. I'm running the S61 mk2,…