Help, Learn and Connect

Recent discussions

Enabling flux mode in loops
Hi! I have been really enjoying using Traktor Pro for the past two years (version 3 and then later 4). I use it with either mouse/keyboard, or a Numark Mixtrack Pro 3 and a midi mapping file found off the internet and edited to fit my needs. However there is something that has always bugged me about loops and flux mode.…
Supreme Edition MOD
For those of you who come from the older forum... Welcome to the new forum! 😉 For those of you who don't know what I'm talking about... Welcome to the Native Instruments forum! Before this forum was created, NI used to have another forum (which can still be accessed, but in "read-only" mode), which is where I originally…
Mapping generic midi (jam) change pad color
Hiya I have started to map my jam for Traktor 4 pro and I was wondering where I could find the explanation of all the functions within the mapping….. At the moment I am stuck with 1. Changing pad color… -I assigned a stem toggle on & off on one pad (add in/deck common/submix/slot mute on/ — Assignment to deck slot 1 /…
Kontrol S49 MK3 via MioXL
Hello, I recently got a MioXL to assist with midi routing my devices. I've been plugging in my S49 directly into the USB host ports of the MioXL and it's been great for sending midi to my hardware synths. What I didn't realize until now is that the standard connectivity between the keyboard and NI's software has been…
Mapping Kontact in Studio One
Hey Native Instrumites I've been working through a fresh install of Studio One Professional 6.6. I recently purchased a new to me M Audio Oxygen 49 and was trying to map buttons and faders. I was able to map the keyboard to Studio One in built instruments like presence then spitfire instruments. One of the techs said the…
Traktor Cruise Mode and Hardware Faders: Is there a way to disable manual transitions?
Cruise mode is great, but I have messed up badly in two gigs now, because of accidentally triggering an auto-transition by touching the faders. I think there are two points of confusion: When cruise mode is activated, it takes control of the software faders and now they are out of sync with the hardware faders (can't…
Mapping new instrument in Kontakt 8
Hi. In previous versions of Kontakt I could make in an instrument and then go to the mapping menu, drag it to the key I wanted and select many keys such that it would transpose up our down a note depending on which piano roll key I played. In K8, it's a very different set up. And while I have figured out that I can…
Help! needed to create a NKS Template for 64bit VST for S Series MK2. I'm doing something wrong
Trying to create a template to use the old AAS Strum Session 2 with my KK S61. I have KK software version 3.4.0. in a Windows 11 PC environment. I was able to use the "Dials" symbol successfully to assign the correct CC dials to the various controls in the Strum Sessions Instrument. Works fine. The instrument uses key…
Numark 4trak not mapping
Hello, I recently got a Numark 4trak board and purchased Traktor 4 Pro under the impression setup was going to be easy. It's been a nightmare, the .tsi file refuses to map correctly to the board. If anyone has anything to help please let me know, I'm going insane. Below is the file I am importing from the official Native…
Akai Apc40 Mk2 new mapping version
Hi group, A new version of my Traktor mapping for the Akai Apc40 Mk2 is available. It contains serveral improvements and fixes. Enjoy.
Faders and modifiers
so currently I have a fader set to button with the interaction mode being hold so the modifier can tell me when the fader cc is more than 0, this is mainly for fader start (there's more to it but that's the gist) so basically if fader is in the range between 1-127 modifier 7 will be set to a value of 1 and if the fader cc…
Mapping for the Rane 4
Hello good day, I am looking for a tractor mapping for the Rane 4, can you please help me? __________________________________________________________ Translated by moderator, for this time only. Please use only English language here, thank you.
Assignment Table Info Missing
I was trying to install the Erick Minekus 'Display modifications for the Traktor Kontrol S8' and when I went into Traktor>Preferences>Controller Manager and changed the device to each of the devices installed (X1, Z2, S8, & Scratch 2), there is absolutely zero info in the Assignment Table space, however when you do the…
Session Drummer: how to output each instrument separately?
Just picked up Session Drummer in a sale. Loving it so far, but something I'm not quite able to work out even when going into the "tools" section: My DAW of choice (Bitwig) allows me to add output chains inside the device, to which I then map each output in the VSTi (in this case Session Drummer). This means that e.g. the…
Master BPM mapping on TRAKTOR S4
Hi! I’d like to map the adjustment of the bpm of the master clock/tempo to a knob or buttons on the S4. If I'm not wrong, it cannot be adjusted with the controller if you sync everything to the master clock.. right now, I'm using the mouse to increase or decrease the bpm..but maybe I'm missing something. Do you know if…
How do I automate the vibrato & pitch bend knob in Electric Mint?
When I try to assign an empty automation slot to it, it simply just won't allow me, any help?
LED Modifiers problem on Xone K2
I encountered with layers overlapping problem, which describing in words is a long and complicated way, so for clarity in a short video I tried to explain on my clumsy English what the problem is. In addition to it, I tried delete Mod3 and duplicating all the necessary led outs (Beat phases, Cell states) and put modifier…
Is there a limit to how many tsi mapping files/commands can be used for a controller?
I'm currently mapping the rane a trak, and have manged to use all available modifiers for a single deck side (deck A) with about ~3500 lines I still have quite a bit more to add that I'm putting in another file plus also more tsi files for removing bugs/ QoL features so I'm looking at most 7 mapping files x2 for deck a and…
Traktor Pro 4 Mapping
Hi anyone! I was trying to map my Reloop 8000MK2 to Traktor Pro 4 & make us of all those buttons anyone know how? It's made for Serato but I was told you can map it to Traktor as well. Any help would be appreciated.😎
Traktor Needle Drop Mapping Problem
I am mapping the Pioneer DDJ-S1 to Traktor 3 but needle drop is not working as expected. I can't post a link as I'm new here but it's youtu.be <forward slash> AGF4AbOgxs0 I expect the track to continue playing from the point where I release the Needle Drop Strip but instead, when I release the Needle Drop Strip on the…

Sign in to unlock member-only content

New questions

kontakt player in daw wont update
Hi, I downloaded sessions guitar electric mint, The Ni app recognizes the new instrument but on logic it dosent show up in the instrument library. ive tried a few things updates on mac, native acsess 2, kontakt 8. does any one no what might be going wrong i cant work it out. i have many instruments from ni and 3rd party…
S88 loses Logic
In Logic, when selecting tracks with different instances of Komplete Kontrol, the S88 M2 does not indicate what instrument is active in both the screen and the lighted key indicators. Sometimes it does, but moving track to track they change very slowly and mostly not at all. Is there a solution? Maybe an instruction for…
Abbey Road Drum Libraries MIDI-mapping
Hi, I need a way to use the same MIDI-mapping across the whole range of Abbey Road (and Studio Drummer) Libraries. They all contain the possiblity to save optional mappings, but I can not find a way to use those across the libraries. Attached picture shows how I created my own mapping and saved it, but it does not show up…
Can I export sample loop & release metadata from kontakt 8?
I am sampling a pipe organ and making a VST instrument. I like Kontakt and I would prefer to do it with it. The thing is, I have the chance to give it to a music museum in Barcelona. They have their own sampler there and I need to send them the samples with its loop and release metadata, so we can port it to their…
Kontakt7 libraries viewer is initialized when closed and opened.
I am using FLStudio2024. If I close the window once and reopen it with the STRINGS ENSENMBLE Instrument open, the STRINGS ENSENMBLE in the Libraries is not selected. (It is the first state where nothing is selected). This did not happen when I was using Kontakt5 before, but I wonder if there is a solution to this…
Enabling flux mode in loops
Hi! I have been really enjoying using Traktor Pro for the past two years (version 3 and then later 4). I use it with either mouse/keyboard, or a Numark Mixtrack Pro 3 and a midi mapping file found off the internet and edited to fit my needs. However there is something that has always bugged me about loops and flux mode.…
Modular Icons Sequencer Notes
Correct me if I’m being a dummy, but you can set the key & scale and lock this in the sequencer. Say I did E Minor. When you go to nudge the notes, shouldn’t this be programmed to minor notes only? It’s a music theory question really. For example, you’ve set the seq to e minor, is selecting maj 3rd or all majors make any…