-
Please connect audio device
Hi, i got the new traktor mx2 controller, so when i plug it in it wont find any audio devices i downloaded drivers for mx2 it worked for a few times but now it doesnt it wont find any audio devices, i tried to plug in a headphones monitors etc but nothing? I used the same setting when it worked but now nothing?
-
MX2 Noise Interference
I am very satisfied with the MX2 controller. There are no problems with noise interference during performances. There, I connected it to a good mixer (Allen & Heath Z10FX). At home, however, I always have noise interference (except for the headphone outputs). I've tried everything: Different power connections (although the…
-
Traktor 4 pro + MX2 sound out modulation
Hello sir, please I have a small problem, I use Traktor 4 pro 4.4.2 + MX2 on a macbook pro 2020 i7 16gb + tahoe 26. Problem: Deck A is playing controlled via MX2 - it plays to my master, I find Deck 2 in the headphones then I start it and start adjusting the basic EQ and it seems to me that by turning and turning the gain…
-
How i calibrate the MX2?
Suddenly the tempo faders lost the cilibration, how i reset them?
-
Can I use 4 channels/decks with the MX2?
Hey! I am looking to purchase a MX2 but wanted to know if the controller can be used to control 4 channels and if so, how? I watched Digital DJ Tips's review on YouTube and he mentions that it can but is unsure how to too (04:20) Video link: https://www.youtube.com/watch?v=ol8vslXoe80 Could someone please explain if/how…
-
MX2 qml MODS discussion
This thread is for discussing qml mods for the MX2. I'll edit this post to list and directly link to different mods listed in this thread in the future and start in the next post with a sample mod. Grid Adjust MOD: adds x2 and /2 BPM function to SHIFT+SYNC/MASTER button. DIRECT LINK Stem FX Send Mod: Adds more stem…
-
How to bind Stem FX SEND to MX2 controller?
Hi! Currently on MX2, by holding a pad under the stem on/off button and turning the beat jump/loop encoders, I can control the stem's volume and filter. I would also like to control Stem's FX Send through the controller, for example, by adding Shift to that button combo (Shift + holding pad + turning loop encoder). Is…
-
Favourite button problem mx2
Bonsoir, J’ai acheté Traktor Pro 4 il y a presque 1 an et je l’ai installé pour l’utiliser avec mon ancienne console Traktor Kontrol S2 MK2……. Good evening, I bought Traktor Pro 4 almost 1 year ago and installed it to use it with my old Traktor Kontrol S2 MK2 console. Recently, I bought the traktor MX2 I plugged it in and…
-
I heard about the MX4 in 2026, IS TRUE?
I read about the exit of a new 4 channel console for traktor (MX4) in 2026, and i would like to know if that is true, only cause i want to buy an S4 but if the MX4 comes out, i'll wait. Thanks. Greetings from Italy.
-
Mix vinyl with MX2 via Audio 6?
Just bought an MX2, already have an Audio 6 and I want to mix vinyl on my 1210s through MX2 - is it possible? Can't get the settings right in Traktor 4 so far. Done all updates etc Thanks
-
MX2 - connections
Hi What's the best way to connect a monitor and control its volume in a live setting pls? I'm guessing its the line out jack, is there a way to control the volume?
-
EQ issue MX2 with Pro4
Hi The left deck high EQ keeps moving to the 10 o'clock position on the screen in the software, when the knob is in the 12 o'clock position on the mixer. I'm guessing the potentiometer has a physical fault on the MX2?
-
Can I use my Traktor Pro 3 license on multiple devices?
So I purchased myself a Christmas present of an MX2, however I haven't yet started to use it because I have plans to purchase an Apple Macbook to go with it. I understand the MX2 controller comes with the full version of Traktor Pro 4, and I don't want to install it on my desktop if I only have 1 license key if its valid…
-
Headphones output mx2@win11
Someone on windows11 does have headphones output now? If not… it starts looking as i bought a practically useless board with knobs :D A large part of a DJ's work is selection - listening tracks using the built-in audio interface, headphones in my case. Without this functionality, I don't really need the MX2. Ability to…
-
Trouble mapping MX2 and Learn feature not working
I just got an MX2 after using only an old Z1 and I'm totally stuck on how to remap. I've watched a bunch of videos on remapping other NI hardware, but I'm not understanding something with the MX2. This is where I'm running into trouble: In the Controller Manager, I can't find any of the default MX2 mappings, so I can't…
-
MX2 right Jog wheel stuck in pitch/jog mode + Traktor pro 4 sluggish
Hi there, Yesterday I had to make a set at a party but couldn't do it properly because of two main issues that I've encoutered : When using the right jog wheel it is stuck in the pitch mode, no matter when I'm trying to reactivate the TT mode by pressing TT or JOG doesn't change the behaviour at all and keeps been stuck in…
-
MX2 mappings
Hi! I recently bought MX2, decided to treat myself for the holidays, and encountered with disabled custom mappings. Of cource i done all traditional steps for our "softwarelovers" club, including reinstall of tp4, switching between pc's and other very important things.. As a result of this unwanted research, I want to…
-
Audio setup Traktor 4 & MX2 Controller
Hi all, I'm brand new to controllers and am having issues getting my new MX2 controller to work with Traktor. Laptop: Lenovo with Intel iCore 5 Software: Traktor 4 Controller: Traktor MX2 The laptop is connected to the controller via the USB-C cable and the both are plugged into the mains. From the back of the controller I…
-
Q&A: MX2 and beyond
Hey everyone, our Lead Product Manager, Michael Koczynski, is stopping by our Discord server on October 28, 2025 at 4pm CET after a full week at ADE. You can drop your questions about the new MX2 controller and all the Traktor insights from the conference on Discord or in this thread. We'll forward the questions to him,…
-
Remapping MX2 FX Controls & Pattern Player to stem control
Hi there! Very much a beginner over here. I have an old Z1 that I'd like to upgrade so I can use my controller for stem control. I'm waffling between the Z1 MK2 and the MX2. The Z1 is familiar and I love that the stems are controlled via knobs. The MX2 feels like total overkill for my current state, but it would be a nice…
-
My PC detects the MX2 sometimes, but not others. Why is this happening ?
Q:Translation inserted by Moderator (translation by DeepL) When I connect my MX2 to the PC, Windows makes the sound that a new device is connecting, but the MX2 does not turn on. This happens to me very often, and after playing around and testing it, it works... but it's very strange that this happens. Does anyone else…
-
MX2 Q&A on Discord . Only Live . Today 28-10-2025 at 4pm CET
Just a reminder to those interested. The MX2 Q&A will be on Discord today 28th of October at 4pm CET. It will only be Live, on Discord, no chance to watch it back. https://community.native-instruments.com/discussion/48273/q-a-mx2-and-beyond They do promise a small recap:…
-
Headphones are not detected by Traktor MX2
I have a bit of an usual setup. Have the MX2 plugged via USB-C to my Win11 laptop. As the default speakers, I'm using my bluetooth enabled surround sound. However, when I plug headphones into the MX2, the MX2 doesnt even detect the headphones, doesnt matter if I use the 1/8" mini jack or the ¼" jack. Also, under output…