2025 Outlook: Maschine, Kontrol, and NKS Hardware Partnerships

1…911131415

Comments

  • PK The DJ
    PK The DJ Member Posts: 2,250 Expert

    @Uwe303 "The keyboard size doesn't matter"

    It shouldn't matter - but when USB devices are connected to their hosts, they are identified with VID and PID codes, so the hosts know what they are.

    I'd assume that the PID for the larger keyboard would be different as it's not the same product, so if the host is only configured to expect the SL49, the SL61 may not be able to join the party.

  • Super8boy
    Super8boy Member Posts: 133 Advisor
    https://community.native-instruments.com/discussion/comment/208578#Comment_208578

    Thanks for that Chris. It is good to see most requests for NKS, Maschine (MK3 & +, M2 & M3), KK and Kontrol S MK3 are being considered and worked on (or planned out at least).

    The one question that I can't seem to get any answer for though since the opening of the NKS standard is:
    How about cross device compatibility & conflicts when multiple devices are connected? Both between Native Instruments Devices, but also say a Kontrol S MK3 and a Novation SL Mk3/Nektar/Akai MPK controller now that they will allow NKS mapping.

    I have several NKS compatible devices from Native Instruments (m32, S MK2 & S MK3 keyboard, Maschine Mk3, + even an older S25 MK1 with its 8 displays and an unused Maschine MK2), on top of a Novation SL MK3/Launchkey Mk4 and probably more controllers as they get released.

    I know that at the time of the S MK3 release, it wasn't possible to have several NKS compatible devices together (although it would be a much needed feature as you have several of them in various parts of the room/studio), but is this being considered now? worked on? planned?
    I can only imagine the deluge of enquiries about this as NKS compatibitily starts getting rolled out by other manufacturers.

    Also, if the EOLed S MK1 series (and Maschine MK1/2 series) are being retired due to not being "smart enough from a hardware stack point of view" compared to the S MK3, how come some of the controllers from other manufacturers are able to handle NKS? Is there still no way to repurpose such equipment which we'd been told was no good beyond KK 2.9.6?

  • Wilmar Boer
    Wilmar Boer Member Posts: 94 Advisor
    edited February 3

    I have four main wishes for the upcoming future of Maschine 3(+). But I don't know if this is the place to post them.

    I agree with @Sunborn so I edited this post and posted my feature requests here:

    https://community.native-instruments.com/discussion/38878/maschine-3-requests-tips-for-improvements

  • unrealone
    unrealone Member Posts: 11 Member

    Bring back the JAM?

    The JAM touch strips are magic. why stop making them?

  • Edouardo
    Edouardo Member Posts: 10 Member
    https://community.native-instruments.com/discussion/comment/208058#Comment_208058

    I had the same problem and contacted NI tech support. They changed a registration oon my account, and now it works… Contact them.

  • Sunborn
    Sunborn NKS User Library Mod Posts: 3,311 mod
    https://community.native-instruments.com/discussion/comment/208625#Comment_208625

    It is not wrong to do so, but in my opinion, it is not the right place. This post (and every similar announcement) is already a big, over-complicated mess-up and most comments are pointing to completely different directions (and many, are totally off topic too) i think…

    So if we want to have results and solutions and help the developers and ourselves, i suggest instead of a ton of lost comments on various threads, to use specific threads for the requests, instead of overcrowding the News announcements.

    I prefer to have my News clean and my Requests elsewhere. With order and clarity, by category and subject, instead of this chaos here!

    If you agree, please post them here, if you like. :-)

    https://community.native-instruments.com/discussion/38878/maschine-3-requests-tips-for-improvements

  • mediK
    mediK Member Posts: 34 Member

    Since Traktor is not a part of this post does that mean that development between production and DJing products has been split into two separate teams?

  • Chris_NI
    Chris_NI Product Team Posts: 68 mod
    https://community.native-instruments.com/discussion/comment/208028#Comment_208028

    Hi @Schmapps1

    The current plan is to allow users to transfer custom chord files between their desktop and Maschine+ and vice versa. So you can use custom chords created by you or others anywhere you can run Maschine 3.

  • Matthew_NI
    Matthew_NI Product Team Posts: 1,656 mod
    https://community.native-instruments.com/discussion/comment/208655#Comment_208655

    This has always been the case. There are teams for Traktor and for Kontrol/Maschine. Then another team for Kontakt.

  • Wilmar Boer
    Wilmar Boer Member Posts: 94 Advisor

    @Sunborn you're right, I moved the post.

  • mediK
    mediK Member Posts: 34 Member

    @Matthew_NI I was mostly asking since we didn't get any information on Traktor, so I wanted to know if I was asking in the right place. But thank you for replying so quickly. All the best.

  • Andy Wt
    Andy Wt Member Posts: 128 Advisor
    edited February 3

    @Chris_NI What is current status of the following bug?

    MAS-29716: M+ Drop outs when changing scenes

    Will it ever be fixed?

This discussion has been closed.
Back To Top

Categories