Maschine+ controller’s display freezing in midi mode

elliotmm · April 14

Hi everyone,

I noticed that my maschine+ display was freezing on midi mode… (on both maschine 2 software and vst)

Actually, when i start a maschine project, after less than 3 manipulations on the controller, all pads and screens are freezed. i can still control maschine 2, but without display sync on the controller. so the pads keeps the sames colors and the screens the last display from before the crash. a bit inconvenient…

Anyone ?

thanks for your helps guys ! 😁

Elliot

elliotmm · April 28

Hi guys,

I tried to connect the maschine with a shorter usb cable, (the previous one was 2-3meters long) apparently it works !

thanks all 😁

elliotmm · April 15

I’m back !

i took a short video of the issue to allow you to better understand.

you can find the google drive link in the attached picture (i’m too young on the forum to post links apparently…)

IMG_2480.jpeg

https://drive.google.com/file/d/1UnabLEaOyKs8rhv3zTMkq-WDEz7TGz7w/view

D-One · April 15

I added the link to your post.

That's Controller Mode, not MIDI Mode.

Hum... never seen that issue before. Is the software and firmware up to date? Both on the computer and the M+ when it's on Standalone mode? If it is then try reinstalling or contact tech support:

https://support.native-instruments.com/hc/en-us/sections/360000091558

PK The DJ · April 15

How is the Maschine+ connected to the computer? Direct or via a hub/adapter? Have you tried using a different port or swapping the USB cable?

elliotmm · April 28

Hi guys,

I tried to connect the maschine with a shorter usb cable, (the previous one was 2-3meters long) apparently it works !

thanks all 😁

Maschine+ controller’s display freezing in midi mode

Best Answer

Answers

Categories