-
Traktor Pro 4 can be used with Z1 Controller?
Hello, I have a MacBook Pro 2019, Traktor Pro 3 and use the Z1 controller. If I upgrade to Traktor Pro 4, can I continue to use my Z1 as usual? Regards Ulli
-
Support
I haven't received any emails from chat or support for about 2 weeks now, What are you guys doing about it? I would like to ask if you update to traktor pro4 or not....
-
S8 display issues in active Freeze mode
Hey there, I have a problem with my S8 (yes, it is probably still supported by NI) when the Freeze mode plus Loop mode activated... The Traktor Pro 4 display shows loop mode and freeze slices properly alined, while the S8 shows the loop too short and not alined with freeze slices... Check screenshots below. (Snap+Quant are…
-
Stems Relocation Issue in Traktor 4
I bought the upgrade to Traktor 4 five minutes ago and I've already found something that doesn't work. Do you need a serious beta tester? Where can I send the request? So, the problem is related to the new stems. They are super cool and fun, but they need to be relocatable like any mp3 because otherwise they have to be…
-
Traktor Pro 3 & 4 hardware connection issues with new MacBook Air
Hi all, hoping someone can help me. I've just purchased a new MacBook Air M2 running Sonoma 14.5 and purchased Traktor Pro 4. However no hardware is recognised when I open the setting tab in both Traktor 4 or Traktor 3. Trying to connect Allen & Heath PX5 mixer, X1 controllers or a A6. None of these pieces of hardware…
-
Traktor pro 4 and Xone:96
Hi all. I have a problem with Traktor 4 and xone:96, No signal on the outputs. Has anyone tested tp4 with xone:96?
-
Running Traktor 4 in High Res
I was told that there is a way to put Traktor in high res mode but I can not find anything about resolution in Traktors settings. The UI looks a bit pixelated and blurry on a 1080 monitor. Night and day difference between Traktor and other applications. It kind of looks like how low res images appear as they are increased…
-
X1 mk3 with Tp3 sound card compatibility ?
Currently running TP3 with s3 but need a more compact setup. X1 mk3 is cool but I need an affordable sound card to match . A friend gave me an M-Audio mix-track duo but it seems that is not working for me cause I can't separate tracks for preview. can anyone help me if there is work around or should I buy audio or audio 6…
-
Cue-Points in track overview not shown (depending on view)
Over the past few days, I’ve been driven crazy by an issue in TP4, and I’ve just discovered which setting is responsible. I thought I’d share this insight in case anyone else is experiencing the same problem. The issue occurs when switching between deck layouts and changing track deck sizes (advanced, essential, etc.).…
-
S2MK3 / Loops don't start at the beginning mark
Hi! I'm using my Traktor S2 MK3 Controller on a Huawei Matebook D laptop on Windows 10 Home 64 bits (10.0 compilation 19044, all updated) / Processor Intel Core i7 - 7500 - 2.7GHz (4 CPUs) - 8GB / RAM 80MB - 2133MHz / GPU NVIDIA GeForce 940MX - 6GB - OpenGL 4.5 compatible / HD SanDisk SSD 239GB - 100GB free. All softwares…
-
Tractor updater
Good day guys hint faced with a problem, when connecting the controller s2 mk3 to a computer windows 11 tractor updater does not see my controller. In the drivers section there is a tractor s2 mk3 but it requires installation of drivers that driver that downloaded on the site with windows 11 does not work. Maybe someone…
-
Pro 3 instead of Pro 4 with the new controller.
Good afternoon. I bought literally a week ago Traktor X1 MK3, but registering a new license for software from the box received Pro 3, although the site and the video says that Pro 4 is included. What should i do now?
-
How can I batch process STEM separation?
I'd like to select multiple tracks or folder or playlist and have it separate over night. How do I do this?
-
Export from 2.11.3 to 2.6.8
Is there any option to export playlists and mappings from Pro 2.11.3 to Pro 2.6.8? On my new laptop 2.11.3 is not working, so I downloaded 2.6.8. I exported the mappings and playlists from old laptop, but they don't work on the older version in my new laptop.
-
created STEMs missing Artist/Release/Title in the collection ?
Hey there, I updated to Trakor Pro 4.01 and created two STEMs from a tracks just to test how that works... they play/load fine... I want to locate my own newly created STEMs (not the originals) in the collection, so I created a Smart List searching for ".mp4" in the file name, works as well... BUT somehow are Artist /…
-
Intermittent Audio Issue on Traktor S4mk3 - Seeking Root Cause and Fix
Hi everyone, I'm experiencing an intermittent issue with my Traktor S4mk3 setup for sometime and would appreciate any insights or suggestions for a root cause and fix. Issue Description: One of the channels (could be channel A or B) stops working properly after varying periods of use (anywhere from 10 minutes to 4 hours).…
-
Latency issues with TP4 :(
I'm having crazy latency issues with TP4 :( Weirdly, LatencyMon picks up nothing. I have 64 gigs of ram and more than enough space on my HD running Windows 11, i5 processor. I am playing tracks that live on my laptop, and I generally don't have anything else open when I'm in there playing around. I can't create STEMS in…
-
No Update in NI Access
I recieved a email this morning saying there is a update to Traktor 4 4.0.1 and go to Native Access to update but I do not see any update in NI Access 3.13.0 Should I just find the most recent full install .exe and go that route ?
-
Output routing
Hello guys. I've got a problem with traktor. I bought today X1 mk3 , sound card complete audio 2 . The software doesn't give me output for my headphones. I am sending photo to you. Have you a solution for this ??? My connection: sound via usb on Mac. X1 mk3 on Mac. Headphones on the complete audio 2.
-
Full screen on startup not working correctly...
I'm trying to figure out if this is something specific to my setup or a known issue. The preference setting for 'Switch to full screen on Startup' seems completely ignored for me. Traktor always starts in windowed mode. I'm currently using 3.7.1 but this is something that's been the case for me for as long as I can…