-
Maschine 3.1 Update
Hello, Every time I try and open Maschine 3 in windows it keeps saying there's an error and I have to close the program. Why? I did not have this issue before the new update.
-
MASCHINE MK1 INSTALL
Hi, I can't install the maschine software (mk1), it is not present in native access, I have to use it as a vst. Is there a guide? Thx in advance!
-
Missing Product Images - Nothing Working
I've had this before and following the steps to delete various files and restart Access then Komplete Kontrol restored them - but this time … nothing. Removed preferences, Application Support files, emptied trash - the usual. But still, no images. What happened to Native Support - the old typeform used to be passable and…
-
Maschine mk1 and generic usb cable
The theme here is mk1 is old and getting dusted off after years. i connect with a 5 meter usb cable to a newer laptop on a usb 3.0 port. the buttons and screen light up and turn off quickly on maschine. next windows says the usb device has a problem and cannot be recognized. However, when i connect with same cable to a…
-
Question about bouncing whole group
Hi! I'm new to Maschine and recently discovered a workaround in Maschine 3 to affect the pitch of samples without losing the BPM. This works if you bounce the MIDI to audio and change the sampler to audio. However, I chop samples and apply them to a bank. I then play my own loop and have a nice MIDI loop in the group. I…
-
Maschine 3.0 desktop software update not available for M+ license owners (FIXED)
Dear @Matthew_NI Starting a new question as it looks to be a new issue. I tried to buy Maschine 3.0 update license on NI web site (the $29 option). However, it says "Wrong License", so to say I don't own the necessary license. I own a Maschine+ and thus I have Maschine 2 license included already. But I can't update, it…
-
Problem detected with Kontakt 7 & 8, Maschine 3...
Hi everyone, here's what I noticed with Kontakt & Maschine 3. When I start these programs (Kontakt & Maschine 3) before connecting my external SSD, I notice that Kontakt freezes at startup. But when I unplug the external SSD, I notice that Kontakt launches immediately. This will be the third time this has happened to me.…
-
Maschine studio in 2024?
Hi all. Does anyone have any experience with maschine studio? I wondered if it would be a good or bad idea to buy one used as I have maschine 2 software. Would it be compatable with the newer software? And how would the features stack up against the MK3?
-
Maschine 2.18.4 closes when loading an effect
Hello everyone, I installed Maschine 2 on an old PC dedicated to make music that I recently reinstalled with Win 10 64-bit. Unfortunately, Maschine crashes as soon as I try to load any effect (EQ, filter, reverb, etc.) and when loading certain drum kits or synths. I have another PC that I used to make audio with Maschine 2…
-
New to the Mk2 mikro
Hi, just bought a unused mk2 mikro from ebay, do i need to buy the software or is it plug and play? I want to finger drum. Many thanks b
-
Maschine+ connect to PC wireless
Hi guys, I was thinking of connecting the Maschine + to the PC without a USB cable using a MIDI-over-USB interface such as (CME WIDI Uhost.) Do you think it would work?
-
Controlling Maschine Mk3 with an external hardware sequencer
Hi, I have a Beatstep Pro connected to my Maschine MK3 midi in, with a set of samples, one per Maschine pad. At the moment all I can get it to do is play back/ sequence one sample from currently selected Maschine pad, where I would like the Beastep Pro to sequence different samples on different pads. Both Maschine and the…
-
MIDI FX Plugins & Maschine
After many issues trying to play midi fx plugins through Maschine I found this little piece of software that is making my life quite easier, Midi Player Pro. I can even play 2 different midi fx chains at same time filtering incoming midi notes. I hope it works for you too.…
-
Syncing Maschine MK3 (stand-alone) with Ableton Live 12
Hello, I am using the maschineMK3 to send midi to my synthesizers. So the maschine is set on send-clock. Now in Ableton I have set the midi inputs of the maschine on sync. But I do not get any incoming sync messages. When I click on 'EXT' in Ableton it does not sync. Can anyone help me? I do not get the grey box (right &…
-
Strumming (on the touchstrip) with Chords
I've been digging through Reddit and these forums to see if it's possible to use the touchstrip to strum ("Notes" mode) while using Chords, instead of having to use Keyboard mode and manually pressing each note. I know for a lot of people this would be a big game changer and make song writing a lot easier, especially now…
-
All I want for Christmas is some MIDI FX routing! ^_^
I know it's like beating a dead horse, but one can hope…
-
Bug : Maschine 3 plugin scan fails since new update
Maschine 3 does not complete plugin scan and is frozen at the last plugin although maschine 2 does it just fine.
-
Request: Serato Sample GUI Integration for Maschine or improve the native Sampler
I’ve been a long-time Serato user and I also work heavily with Maschine. I wanted to ask if it would be possible to either: Release an update for the native Sampler that works almost identically to Serato Sample, especially when it comes to fast, detailed slicing and timestretching. Or — create NKS compatibility for Serato…
-
How do I assign an AUDIO pattern I've created in Maschine MK3 to a Pad?
Yea so being pretty new at this I couldn't seem to find a proper answer on the web, so I figured I'd try here before downloading the manual to try to find it. Thanks, Larry
-
Are there Maschine Mk3 DAW integration scripts for Ableton Live 12?
I understood a while back that the new Live 12 would not be supported any more, but seemingly this has changed? I just saw the release notes for 3.1 and read that Maschine+ now has "Updated DAW integration scripts for Ableton Live versions 11 and 12." Is this also implemented for Maschine MK3? Or was it already and I…
