-
Is the Jump forward or Jump back function available on the maschine Mk3
im just getting use to the maschine Mk3 having come from the Mk1 & mk2 im wondering if the functions which was on the maschine Mk1 & Mk2 is possible with the mk3 the jump back buttons "were" positioned where the Erase & Tap button are now on the mk3… one could double time, or halftime the playing project by pressing the…
-
Maschine 3 Software - macOS Sequoia - m1 Pro
Hi there, i´ve bought the maschine 3 update already in the past. There are terrible issues during the playback of my sound. Also within the export as an example if i create a 4 bar loop with 3 instruments they will play all fine for some seconds and then they missed randomly some instruments then the instruments came back…
-
Maschine MK1 back from the dead - but I need the software
Hello! When Maschine first came out I bought it, used it, loved it, had kids, put it away, forgot about it. I've pulled it out of the loft, taken an old Mac laptop and knocked it down to El Capitan 10.11.6 - now I just need the software. So - I've downloaded the old version of Native Access, added in my old serial number -…
-
Maschine support ticket question
Hello all, I submitted a ticket request in regards to buying a used Maschine Mk3 from guitar center but they told me they do not have the license transfer. The support request was submitted on Friday but I haven’t heard back from anyone. I didn’t receive a confirmation for the support ticket and now I am being paranoid if…
-
Transfer of id and no mk2 control software download available
I bought a second hand maschine mk3 over a week ago and i have the forwarded email with the transfer id codes for komplete select too. I trasferred the komplete select no problem, but in order to transfer id the maschine mk 3 I need to download the mk2 maschine kontrol software before trasnsferring the mk3, but it dd not…
-
Unable to find the link option when using maschine plus on standalone mode
I updated my maschine plus recently and now I’m unable to find the link option when using my maschine plus on standalone mode. Then when i use it via USB, Maschine and traktor links but doesn’t seem to sync. Please advice on how i could resolve this Thank you
-
Cant find Maschine software and unable to turn maschine mikro mk3 on
Cant find Maschine software and unable to turn maschine mikro mk3 on i had it installed and running a couple years ago and trying to get it up and running is becoming a headache. thanks for your help
-
Failed installment
Mack Book Air M1 2020
-
Maschine 3 Doesn't get updated
Hi, I can see that update 3.3 has rolled out and I didn't even received 3.2. Does anyone knows what could be a problem?
-
Why does Maschine MK3 require TRS input jacks for its Line In inputs ?
Hi I'm trying to get Maschine to connect to an external synth (a Yamaha SEQTRAK) and while I can trigger sounds I can't get any audio to go into the MK3. The cables I have, a stereo minijack to 2 1/4 inch TS mono jacks works fine and outputs sound when connected to the SEQTRAK, but when plugged into the MK3 Input 1 and 2,…
-
Central Library on M+ Standalone 3.3.1 Contents?
What parts of the Central Library can be used for the Maschine+ Standalone? Can you be more specific?
-
Maschine+ Set midi note per pad?
Is there any way to have two pads respond to the same midi note? I would like to be able to have incoming midi (not patterns) trigger all pads, and then solo particular sounds I want to hear. Linked pads don't work this way, at all. I don't see any way to set the midi note that pads 'receive'. Possibly there is no way to…
-
Problems with Micro-SD-Cards in maschine+
The following problems occurred: The original SD card (Micro SD) still had 5 GB of remaining capacity; Maschine+ refused further expansion, even though it was only 1.2 GB in size. All previous expansions suddenly disappeared; Maschine+ displayed: "SD card unreadable." Therefore, a 128 GB Sandisk Extreme V30 Micro SD card…
-
product serial number taken
I have a Question about a Mischine 2 i got from a pawn shop. but im trying to get it on my computer and its saying the product is already beimng used by another user. plz help me out. thanks and be blessed
-
Can't see Roland Cloud Plugins in Maschine 3 Software
I'm stuck! When I open the preferences tab in Maschine 3, I can see all of the Roland Cloud intstruments, all present and all ticked in the tick boxes. However, they're not actually showing in the list of available instruments. I think they're loacated at C:\program files\common files\VST3\roland….. The wierd thing is that…
-
Issue with Behringer UMC1820 and ADA8200 into Maschine Plus standalone
Hello all, I am running into an issue attempting to connect a UMC1820\ADA8200 into a Maschine+ in Standalone mode. The 1820 and 8200 are connected with two ADAT cables, and everything appears to work OK into an iPad with AUM (all 20 input channels are recognized and pass signal when selected). If the setup is then plugged…
-
Using Maschine MK3 as a midi controller without installing Maschine software
At the music school I work at, we bought a Maschine MK3, for use by teachers and students. I use Maschine a lot, and I would have hoped for the students (who don't own Maschine) to at least use the hardware as a midi controller in Ableton/FL Studio etc. The students use their personal Mac and Windows laptops. It seems…
-
Bounce in place - M+
I'm trying to figure out the difference between the bounce-in-place feature implemented in the latest M+ update and resampling the old-fashioned way. Is the result the same, or am I wrong? Can someone more knowledgeable explain the possible differences and/or conveniences of the much-vaunted bounce feature? Thanks a lot.
-
Maschine 3 midi editor bug (mouse pointer)
Hello, I report about this bug which didn't exist in Maschine 2. In Maschine 2 the midi "length" edit cursor appears only on the far sides of a midi note which is logical. But since Maschine 3 update it jumps around and appears in middle of note which makes midi editing more frustrating. Hope to have this fixed! (since it…
-
Clock Synchronization Issue Between Maschine 3 and Virus TI2 via USB
Hello, I am experiencing a clock synchronization issue between Maschine 3 and Virus TI2 connected via USB. The problem is as follows: Virus TI2 is controlled through the Virus Control application inside Maschine 3. In Maschine, I have a kick set on every beat, which plays perfectly in time with the metronome, but the Virus…