-
compatibility files from Windows To Mac
Hi, i would like to know if the Projects and files programmed with Mashine 2 Windows ,can be loaded and recognised by another computer Mac with the same version of Maschine 2 ?! Thank you for your answer.
-
Getting Maschine mk3 playhead to sync with my DAW
I'm having difficulty getting the playheads to match up with Maschine MK3 and Logic Pro X. If I set a loop in Logic Pro X (say bar 12-18) and record something in the Machine in playback, it will start on bar 15, entirely off. I can't figure out what I am missing here. Thanks, T
-
Maschine Mikro III as midi device ¯\_(ツ)_/¯
perhaps I am being stupid(?) but I can’t seem to use the mikro pads (in midi mode) as a controller in logic (such as using it with Kontakt) my mikro iii only turns on/ lights up when I open an instance of maschine as a plug in within logic.?.? whilst I CAN select maschine mikro as a input midi source as it appears in the…
-
I have recently registered my Maschine MK3, but haven't got the Maschine 3 software free.
Hello, I have recently registered my brand new Maschine MK3 hardware, just about a month ago. And I am still struggling with how to get the complimentary Maschine 3 software. No notice email haven't arrived. Coming to a dead end, could I get some help? Cheers,
-
Maschine 2 AND Machine 3 Software Running on the same computer?
The title pretty much says it. Currently I have both Traktor 3 and Traktor 4 installed on my Macs. Will I be able to install the updated Maschine 3 software while keeping the existing 2 installation of 2.18.4 or will 3 replace that installation. If it replaces it, at the current time I have no reason to upgrade until I see…
-
Major bug on the channel strips of my Maschine Jam with the Ableton Live 12 template.
I've tried everything, but nothing works. When I connect my Maschine MK2, I have no issues controlling track volumes in Ableton Live 12 or even accessing my plugins. However, when I try to do the same with the Maschine Jam, the channel strips simply don’t work—there’s no interaction with Ableton, and no LEDs light up. Even…
-
Special Midi Mapping for Traktor 4 and Mas.MK3
For those using Traktor 4 and Maschine MK3 in MIDI mode: I found this by chance on the internet: Very cool mapping for step sequencers and pattern players, and much more. Maybe this will be of interest to someone.
-
Control Setup Issues on Logic Pro 11 with Maschine Mikro Mk3 & Komplete Kontrol M-32
Hi there! Hope you´re doing well. I´ve been trying to setup my controllers (MM Mk3 & KK M-32) to Logic and only they keys and the pads seem to work. The Buttons aren´t automatically assigned. I´ve downloaded the latest firmware (2020) for both devices and even though I used Rosetta to open the Update Application, they…
-
maschine midi note scene change not working
I can not stress enough how frustrating a company native instruments is. I can't stand their chat support, their lack of phone support, and the needless emailing back and forth for weeks on end only to get basically no help, but I digress. I have been trying to get midi scene changes to work for weeks. I have a keyboard…
-
Maschine & Session Guitarist - MIDI sticking to just 1 pattern?
I'm having a bit of trouble figuring out why I can't use more than one guitar strumming pattern in the Maschine software when I lay down the MIDI performance using my Maschine MK3 hardware to play the notes I want. Whatever I play back after recording the MIDI seems to use the currently selected strumming pattern inside of…
-
I have e question over exporting different scenes with all data from existing project together at on
Hi Native instruments, I have e question over exporting different scenes with all data from existing project together at ones and save them. Then, close machine Software. Open machine software with an other existing project, then importing the copy existing scenes from the other execs scenes from my projects to this…
-
Bought my Maschine mk3 at a pawnshop and my serial number is already registered
Am I screwed? Is this thing basically useless without it? I read somewhere that you need to register the serial number to get access to the VST and I wish to use it in FL studio
-
recording full notes with the Mirko MK3
Anyone know what settings in the Mirko I need to look at to input full notes in Machine when recording? https://youtu.be/FovJoYxyxbU
-
I want to trigger Maschine with DDrum triggers
I can get the triggers to trigger Maschine but can't figure out how to select different sounds per trigger. EX: If I load a Machine drum kit, each trigger DDdrum trigger I hit references a single sound bank. I can't figure out how to select snare in the kit>make it sound the way I want and then switch Maschine to kick and…
-
Using Alesis Nitro Mesh Drum Pads With Maschine Software
Has anyone successfully gotten this to work. Im struggling trying to get the mesh pads to trigger the different Maschine pads when hooked up through midi. It seems like no matter what pad on the drum set I hit it only trigger different octaves of the first drum pad on my Maschine. Please help if you have had success with…
-
Combining projects for a continuous set list
Does anyone have a tried and tested way to combine several projects into one single project so you can play everything in order live? The way I use maschine + is to run drums plus occasional samples, and I have external hardware synths that handle most of the other sounds so CPU isn't an issue running a million instances…
-
Play Series available on Mpc but not Maschine+
So Play Series is now available on Akai's Mpc, but not available on Native Instruments Maschine+. NI does not give af about its users, just a money grab at this point. Absolutely terrible!
-
Question about Rhythmizer Fusion
I have Maschine Mk3, and I'm trying to discover if the Rhythmizer Fusion arpeegiator will work inside of maschine? I have the NI Midi keyboard and my audio interface has midi inputs, im still relatively new to the platform so any help would be greatly appreciated. Larry B
-
How do you Create Fade In and Fade Out in Maschine 3 Software
I am using Machine 3 Software. I have been unable to figure out how to Fade in and Fade out some instruments. I have some clips and Instruments I would like to Fade In and then slowly Fade Out. Can't seem to. get this working and have been unable to find a Tutorial on how to do it in SOFTWARE. This should be a very simple…
-
inputting notes
Hi all Is there a way to input notes in the software or while playing the Micro mk3, so that they don't automatically snap to the grid? https://youtu.be/gBInCiwKU5E