-
Can a hardware compressor be connected to Maschine 3?
Can a hardware compressor be connected to Maschine 3?
-
maschine mikro mk2
Hi i noticed that the S88mk2 is compat with Maschine 3.0. However i have a maschine mikro mk2 it is not listed in the compat contollers :( for maschine 3.0 software am i still able to use maschine 2.0 in conjunction with the 3.0
-
How do you import multi-samples into Maschine sampler? Please Help.
I used to do this with instruments built in Mainstage, but either something was wrong or I lost the knowledge, having been spoiled by Maschine's multisampler. I would take the multisamples with the metadata in each file name for note and velocity, then drag them into the left column of the zone page. They would…
-
Having issues transferring multi-samples into Maschine sampler, please help:)
I use to do this all the time, sample in MainStage then drag the files into the zone section and Maschine would read the meta data in each files name and place each sample in its specific zone. well today I pulled up a project with some of my multisamples requiring me to “locate” each sample. So I found the folder, dragged…
-
Is it possible to use the M+ USB inputs in controller mode?
Hi! I've been using Maschine for a bit over a decade now and just upgraded to a Maschine+, which I've mostly been using in standalone mode. However, I also like to make DJ sets using modular setups in Ableton, with a lot of different controllers… And cable management can get quite tedious. So, I was wondering whether it…
-
Maschine 3 purchased but only Demo showing, Native access not working correctly serious bugs
Already been using & supporting Native instruments since almost day 1 Apple Quadra, Pismo G3 macbooks yadd yadda, Had Maschine 2 on an older Mac Pro machine, Wanted to use Maschine 3, Didn't fancy the option of running native in M4 chip scenario so bought a newish i7 intel mac running 15.1.1, Just downloaded native access…
-
Yamaha DX200 Maschine Group
This is something that i made for me and like to share with you, i am not sure if here is the right place, or it is the Sampling Room, however i read that there, all contributions must be made with the auto-sampler, so since i used the Audio module and not the Sampler, i post here. As far as i know, this instrument was…
-
maschine cant open bug
Maschine freezes when I try to open it during the plugin scan. It stops at "Console Recall" plugin which I think is from. Is someone experiencing the same problem ? UAD
-
Maschine Central Expansion
I've purchased the MCE and the only content I able to see and use are the kits. Nothing in Sounds or Loops, and One Shots only show Drums and Percussions. I've checked the folders and instruments are in the Sounds folder and the Samples folder, but they are not showing up in Maschine 3 Software. Any clue to why this is…
-
when registering Maschine 3 in native access i dont have base model.
i tried using the serial number that comes with the maschine 3 software in native access in order to download the program but i get an error that says i dont have base model. i just bought the mikro mk3 and registered the hardware but cant register the software. anyone else ever have this problem?
-
Maschine 3 serial number issue
Maschine 3 serial number says don't have base model. what do i do?
-
Izotope Plugins not working in Maschine 3 software
Izotope Plugins work fine in Maschine 2 software but they carsh most of the time in Maschine 3 software > see Image. you guys have the same problem? Cheers
-
Ghosting on MK2 screens?
Hi! I haven't used my Maschine MK2 for a while, so I forgot how the screens on it look. I started slicing samples and I love to zoom them in to get a more precise slice, but I notice significant ghosting on the screen when scrolling the slices, also some artifacts on the waves. Is this normal, can someone using MK2…
-
Does the Komplete Kontrol S61 MK2 Keyboard work with the Maschine 3.0 software?
When I try to use my Komplete Kontrol S61 MK2 keyboard with the Maschine 3.0 software the KK S61 MK2 goes in to midi mode. I read complaint from other Komplete Kontrol MK2 uses that are having the same problem. So… does the Komplete Kontrol MK2 keyboards still work and have tight integration with the Maschine 3.0 software?
-
Maschine 2 and Maschine Essentials not showing up in Native Access
I recently bought a brand new Maschine Mikro MkIII and went to set it up. I entered the serial number in Native Access and it seemed like it registered it properly as I was prompted to go to the library and download the software, however neither the Maschine 2 software nor the Maschine Essentials showed up in my library. I…
-
Does the upgrade to Maschine 3 come with Ozone Elements 11?
I was watching the Maschine 3 introductory video and in the video they mention that Ozone Elements 11 is included? I don't see it after I downloaded Maschine 3.
-
Why did NI remove great features
these are the controller options for a Komplete Kontrol S mk1 on maschine 2. These options do not exist on maschine 3. If given a choice I would have picked this over mp3 import or tempo change both of which I have simple work around for. 🤷♂️ seems dumb to me.
-
Maschine Studio Screen Colors Seem off?
Hey guys I just bought this off Ebay, a maschine studio and its all fully functional and working as it should. BUT the screen colors seem blocky and immensely off. I watched a YouTube video of someone turning theirs on and its definitely different and not as high def / detailed. I attached some photos. Got it from a pawn…
-
trying to download my software elements mk2 for my maschine2
I have changed my computer and I am trying to download the maschine mk2 elements software, just as I had it on the previous computer, but I don't know where I can download it... in native access I see kontakt elements selection, maybe is that , but when trying to install it and I get an error "that path is invalid" what…
-
Maschine MK3 Software Missing.
I Just Bought A Maschine MK3 And I Dont Know If The MASCHINE Software Is A Seperate Download Or Thing But I Have Downloaded The Complete Starter Kit But Nothing Shows Up For My To Input Anything Because I Dont Have The Maschine Software Itself. I Am Brand Spanking New To This And Completely Lost On What To Do And Where To…