-
Machine Quick Export Freezes
No matter what state Machine is in, both as a VST and standalone, both with and without the physical Machine connected, Machine 3 freezes any time I try to quick export. How can I remedy this?
-
Using Komplete Kontrol Software with Maschine MK3 hardware
Hi everybody, Hope everyone is doing well, I got a little question can I use the KK software with Maschine MK3 hardware? Actually the Komplete Kontrol MK2 and Maschine MK3 got the same interface with two screen and the same controller (button etc…). Maybe I missed something with Maschine 3.0, but I always got that…
-
License issue mk3
I everyone, I bought a Maschine Mk3 second hand last week, but I have a license transfer issue, anyone know how to reach the assistance NI please? So many email addresses I can’t find it. thank you guys
-
Bug: Maschine 3.1.1 (Windows 11) does not start: Status "Waiting for product scan..." forever
Hi there: After updating to Maschine 3.1.1 it does not start any more and is stuck in status "Waiting for product scan ..." Windows suggests to stop it's execution. Any ideas?
-
Maschine stuck on waiting for product scan only with SSD plugged in
Whenever I try to use maschine, it will stay forever on the "waiting for product scan" screen. However, whenever I remove my external ssd with all my libraries on it, it seems to work perfectly. I want to use my libraries with Maschine so I dont know what I can do to solve this. I tried running Maschine as administrator on…
-
Official update status - Maschine 3 (current version: 3.2)
This thread provides information about patches for Maschine 3. It will be updated whenever new information becomes available. --------- The currently available software version is 3.2. Please make sure that your installation is up to date. ------- 3.2 - 2025-06-12 ADDED Piano Roll lightguide support for NKS instruments and…
-
Machine Hardware and Protools
So I've been able to successfully integrate my Kontrol s49 into Protools. Transport controls, midi recording and everything else I need works. I'm having trouble using my machine + as a midi controller on the same way. I can see through the mixer that I'm triggering pads and something is registering on the track based on…
-
Sample repetition without overlapping
Hi guys, I recently got gifted a Maschine Mirko MK3, and I'm trying to flip some vocal samples. I created a group of samples, but I cannot understand how to repeat a sample without a sound overlapping. I would love to share an example video, but I can't add links in my discussion. Does anyone know how to do it? I'm using…
-
Feature Requests Regarding Automation and Macros in Maschine 3
Dear Native Instruments Support Team, I hope this message finds you well. I would like to inquire about potential updates to Maschine 3 regarding automation and macros. Specifically: 1. Automation Curves Are there any plans to implement automation curves, such as drawing lines between points, adjusting curve shapes,…
-
Maschine MK3 - Machine central + Maschine 3 are missing in my library
As mentioned i also have created a ticket regarding missing Machine 3 and Maschine Central in my Native Access 2 library or in my NI account. #4565360 - Maschine central and Maschine 3 software are not showing in my Native Assess 2 library
-
Just purchased Mikro Mk3 but native access only offering maschine 2
The subject says it all. i say a few months back there was finally new maschine 3 software. I was a first edition maschine MK1 buyer back in the day, I liked it a lot for a while, but by time I also purchased maschine 2 software I felt like the old hardware was not well integrated, and the install of the software was not…
-
Using Maschine MK3 Audio Interface and Routing Traktor to Channels
Hey folks, I have a Traktor X1 MK3 and I am using Maschine MK3 as an audio interface. I would like to be able to use the signal coming from Traktor as an input that I can then route to effects in Maschine, however I can't figure out how to route the output from Traktor as inputs in Maschine MK3. Any assistance would be…
-
PreAmp for MAschine+ Line Input?
Hi there! I have recently bougth a Roland TR-6S with the idea to connect to my Maschine+ via Line Input. Problem is Input Gain is extremly low….and I do not want to use a Mixing just for this…so I was thinking to buy a preamp (or related) in order to connect the TR-6S roland with properly levels. Not sure about if this is…
-
expansion packs serials able to be transfered ?
Hi all as a newb to ni ecosystem, im aware of hardware serial able to be transferred to new buyer if i buy 2nd user maschine however are expansion packs serials able to be transfered ? TIA 👍
-
Smart Strum in Chords Mode
Hello community, I'm a Maschine+ standalone user and I'd like to propose an improvement that I think would greatly expand creativity for those of us who compose music without advanced music theory. I'm referring to implementing a "Smart Strum" feature within Chords mode, allowing you to use the Smart Strip to break down…
-
Maschine Jam smart strips jumping values
When I set a parameter value using one of the smart strips, it will be quite accurate as long as I keep my finger on the smart strip. But often when I take my finger off the smart strip, the value jumps forward or backward a little. [quote] as useful as touchstrips are, fat fingers dont help with control & precision LOL…
-
After 1.6.1 Update (Maschine Plus) MIDI Ports Disappeared
After Updating Maschine Plus to 1.6.1, the MIDI Ports (USB/Maschine MIDI) disappeared from the List of Sources for Connecting MIDI Controllers. Even when I Load a Project with the MIDI previously configured, the MIDI Ports options are no longer Available How Can this be fixed, Please? Uploaded a small video showing how the…
-
Any scripts for Maschine MK1 and Ableton Live Lite 12?
Any scripts for Maschine MK1 and Ableton Live Lite 12?
-
Machine Plus stuck after update
Hi, Just received a wireless update to Maschine Plus firmware. Updated. But unfortunately I’ve been seeing a “Maschine+ is restating” logo for about an hour. I think it’s a bad idea to plug it out or manually turn it off after updating. But what else should I do?
-
Feature Tweak: One-Click Bypass
Hello Everybody, i like to see the Bypass Button in front of the plugin Page beside the pluginchain selects on my MK3; without having to use the Shift Button. Please like everybody who also wanne be using Bypass one Hand Style, maybe who more do want they maby tweak this….