-
Hot Cue mapping doesnt work as expected
Hi I am trying to map hotcue from a custom made hardware which sends CC01, CH1, 071. And below are my setting for the hot cue Add in -> track deck-> cue -> Select/set store hot cue Type: Button Interaction: hold Set as value: hotcue 2 Assignment: Deck A The problem is-When I send the CC the track position never jumps to…
-
Multiple Files in one midi mapping file?
For some reason when I save a midi mapping tsi file Traktor seems to save several midi files into one. So whenever I plug the controller I'm mapping, Traktor uploads several mappings at the same time. I end up having to delete mappings I do not want as the controllers are receiving conflicting midi messages. Obviously, I'm…
-
Using Mixer FX with a Z2
Has anyone created a mapping to allow access to the Mixer FX with their Z2? Perhaps the ability to just cycle through them? I searched the forum here but cannot see it raised anywhere. And yes, I know I have access to the regular deck FX on the Z2 but there are times when I like the speed and simplicity of the Mixer FX, as…
-
Need Help Setting Up Traktor MIDI Shift Button
I am trying to use Modifier #1 as my "Shift" button. I want to hold a button down on the MIDI controller to display a different layout of shift functions and corresponding LEDs (MIDI OUT) on the controller, then as soon as I let go of the shift button, all the LEDs go back to the normal, non-modifier layout. Right now, the…
-
Does anyone still screenhack?
I'd like to learn anything and everything about screenhacking, which is where you reprogram or mod the displays on MIDI gear. I've wanted to use my Maschine Mk3 screen with Traktor for years, but I know I won't get any official support for that, so I'm curious what y'all can help me with. I've seen and used them, but IDK…
-
does anyone have a pre-mapping download for stems buttons using kontrol Z2?
I want to be able to use mixer buttons/knobs to control the stems. I having a hard time using the echo fade out with the Z2. I have it set to post fader, but the fader doesn't seem to work.
-
Mapping Sync Mode (tempo sync and beat sync)
I want to be able to toggle the Sync Mode (beat sync and phase sync) without having to go into the preferences while mixing a set. Is there a way to keyboard map this?
-
Switching from deck A to deck C via computer keyboard
Hello. The button on my controller that changes the A/C deck is having a problem. I want to know which key on the computer represents this command to change decks?
-
How to map correctly pfl led for custom Pioneer ddj 400 map (Tracktor PRO 3.9)
Hi, I have different device that i like use with Tracktor PRO 3.9 in different situation: Config 1: I use Z1 + X1 (and everything works fine :) ;) ) Config 2: I use Pioneer DDJ 400 with a custom map, everything works fine, but I need to configure the PFL volume separate for channel A and channel B: actually only the master…
-
Key/Semitone up or down Mapping
Hi, I am a s4 mk3 user. I want to map my Deck C and D filter knob to Deck A and B's Key/semitone. Has anyone done a similar type of mapping before? Any suggestions are welcome.
-
How can I close browser screen on s4 mk3?
S4mk3 browser display. On the s4 itself the only way to get out of the browser screen is by selecting a new track. On my s8 there’s a button that would clear out the browser for song selection and back to what was displayed. I can’t figure out any button combo to avoid having to load a track instead. Situation trying to…
-
how do i swop knob functions s4 mk1
I want to swop the headphone cue mix with the loop dry wet in the middle of the controller can some let me know how to do it or if its not possible to do it thanks in advanced
-
Can I translate MIDI assignments into Spanish?
Hello, I am translating the TRAKTOR 3.x PRO midi assignments since I have not found them in Spanish. Is it legal to do it? Can I post the translation ONLY on this forum? https://www.native-instruments.com/ni-tech-manuals/traktor-pro-manual/en/configuring-midi-controller-for-controlling-traktor a greeting
-
I don’t see stem decks on my map editor, any suggestions?
I don’t see a stem decks on my map editor to assign, any suggestions?
-
Remix Decks mapping
Hi everyones! I'm trying to mapping my Launchpad X for Remix Decks. I want to command a single cell with one button: -first press:capture -second:play -third: mute or stop I can't find the right commands for that. In practice, i want the command "Slot capture/trigger/mute" but for the cell.
-
Traktor Pro: how to map Akai APC40 midi controller knob
Hi, I am trying to manually midi map Traktor Pro to an Akai APC40 mk1 in both directions. I have defined the following 2 midi mappings for adjusting LOW eq: My problem is that adding the output mapping (for having the LED feedback in both directions, even when changing the value on software) is causing a glitch when…
-
How to have more then 8 modifiers ? are two seperate tsi files the solution, need explanation
Hello Traktor fans, I found a short hint on the internet that it should be possible to use more than 8 modifiers in Traktor if you split the Traktor tsi file into 2 files. Is there someone here who can explain this to all of us Traktor users in more detail? That would be great. Best regards ranger930
-
Remote Control for Traktor Pro 3
I need a remote start/stop function installed on an iPad. MAC: Installed Traktor Pro 3 iPAD: Remotly start/stop of a loaded deck in Traktor Any ideas?
-
Slot 1 Cell 1 Trigger MIDI mapping works only first time
hi, Sorry, if post is repeated, just haven't had enough luck to find a solution by using search. ---- I added Slot 1 Cell 1 Trigger MIDI mapping. When I press the button on MIDI controller, it plays sound. When I press the button again, it doesn't play any longer. Is it expected behaviour? Am I missing something? Is "Slot…
-
Pioneer FLX10 and Traktor Pro
Hi, Is there already an opportunity to connect to the Pioneer FLX10? I´m using Traktor Pro since years and I don´t want to move to Serato. But if Native Instrument will not cooperate for this new flagship from Pioneer I need to switch to Serato. Any ideas?