Hi all, I bought a Komplete Kontrol A61 keyboard a year ago and now I have changed it by a Yamaha digital piano. Therefore, I gave the Komplete Kontrol A61 to a friend. When I installed Native Access for the firts time in my computer, I had several applications available including The Gentelman preset. However, when I…
I have recently purchased the Definitive Piano Collection upgrade. I already had The Gentlemen installed and upgraded with the Grandeur and the Maverick. Although the two new plugins installed and play OK, there is a problem with the KOMPLETE KONTROL screen. If selecting The Grandeur or The Maverick and when selecting…
Hey, I recently purchased an Arturia Minilab 3 and the Gentleman was in the software bundle that came with the controller. I followed the instructions on the Arturia website and installed Native Access, Kontakt 7, and the piano, but when I went to play the instrument I couldn't get any sound out of the application. I even…
My Maschine session is loaded with sampled instruments and Kontakt's The Gentleman. All sampled instruments respond fine to the sustain pedal attached to my MIDI keyboard. Gentleman does not. Even though the 'red light' for PEDAL does lights up when pressing, I release keys and sound goes off, just like if no pedal is…
Hello, I just purchased the minilab 3 and it came as a gift in gentleman, but when I open it in the 2 daws that I use (FL and Ableton), it appears as a DEMO version. I don't know how to solve this error, since I have the serial number but in the daw it detects it as a demo. how can I solve that? I can provide the number so…
Hi all, I'm new to the whole Kontakt / Komplete thing and it's utterly blown me away. Absolutely fantastic, but I do have one problem / query and was hoping someone could help. I preview Gentleman sounds in Komplete Kontrol and they all play fine. I can hear the variations in sounds. But whatever I actually load, I just…
Every time I check available software to install it never shows up.. But I can see it in Native Access and the website says that it comes with Machine+
Hi, I am new to midi keyboard. I am using The Gentleman and it seems like no matter how high I turn up the resonances, I can't hear the "pedal effect", they just sound the same no matter what. So I wonder do I really need to purchase a sustain pedal so the notes can sound more connected or is there anything I can do with…
Hi there, When I am using The Gentleman for some reason it starts using sustain on key press from E3 and higher on my Kontakt s88 keyboard, it's just this VST though and it does it even with my sustain pedal unplugged so I know for sure its this VST being strange. Anyone experienced this? Thank you, -Gene
Hello, I have installed sample bank The Gantleman but it does not play sound previews like other banks. I installed it thru Native Access and I am using Komplete Kontrol 2.6.7 (R1) on Windows 10. I found some clue in old forum where was described to reinstall bank but it does not help. Can you help me please?
Hello all, I have been working in Reaktor for quite a while and this little issue has bothered me for a long time. I have built a synth in Reaktor that has 12 voices (for instance). I have many Scopes visable so I can see the waveforms that all of the Oscillators make as well as how they combine into a more complex wave…
Hello, I have Komplete 14 (Standard), and am deciding between MPC One+ and Maschine+. A deal maker would be, if there are any at least rumors that all Komplete content will be supported in the future on Maschine+, not just the limited subset, which is available currently. I would like to be able to use all Kontakt…
Am I wrong……? Somehow I have in mind that there's a Hardware License required for Native Instruments…isn't it? Is a HW license also required for a used Traktor Kontrol S4 MK2? I have seen offers; but mentioned that there is no license ( so I need to assume that there is no HW License as well) Any tips / experiences?
A new issue has just started with my Maschine MK2, the LCD screens are lighting up but no text is showing up. I haven't done any SW updates / OS updates. the issue started out of nowhere. The screens light up but no text. I read a similar thread on here and went through all the suggestions but no luck. Please help?
So I've been able to successfully integrate my Kontrol s49 into Protools. Transport controls, midi recording and everything else I need works. I'm having trouble using my machine + as a midi controller on the same way. I can see through the mixer that I'm triggering pads and something is registering on the track based on…
Dear Native Instruments Support Team, I hope this message finds you well. I would like to inquire about potential updates to Maschine 3 regarding automation and macros. Specifically: 1. Automation Curves Are there any plans to implement automation curves, such as drawing lines between points, adjusting curve shapes,…
As far as I can tell it IS possible but not officially supoorted? Does anyone have clear instructions for simple Daw control of PT from an S88 MK3? Ive tried everything and cant get it. Thanks in advance!
Hi everyone! i bought traktor pro 4 i put the serial in native access everything was fine. when it’s installed i got the demo logo in native access i dunno why. by the way i don't have any Traktor Kontrol or something, i want to play by laptop for the moment. any solutions please 🙏
Hi, Just received a wireless update to Maschine Plus firmware. Updated. But unfortunately I’ve been seeing a “Maschine+ is restating” logo for about an hour. I think it’s a bad idea to plug it out or manually turn it off after updating. But what else should I do?
Hi, Kontakt works fine in Cubase 14 pro, but when i save a Kontakt preset, or settings, in Bitwig, it saves fine, but when I reload the project and click the track with Kontakt in, it goes straight to the library, and does not remember the preset I saved. I contacted Bitwig and they reckon it's a Kontakt problem, and when…
Log in to join the discussions.