Changing the effects on the Filter knobs S8

Snorki
Snorki Member Posts: 12 Member
edited October 22 in Traktor Software & Hardware

Hi, is there a way to have the four toggles on a remix deck be used for Changing the effects on the Filter knobs?

Tagged:

Answers

  • Uwe303
    Uwe303 Moderator Posts: 4,003 mod

    Hello,

    and yes, this should be possible

    FX Selector S8.jpg

    But you need 5 pads if you want to select all fx directly (there is also a option with inc\dec where you would need only 2 pads)

    1. you create 5 times mixer fx selector, then like shown in the picture
    2. you learn the pads to the 5 created inputs (or 4 if you dont need all fx)
    3. set to value sets the fx, where 0 is select filtr, 1 to 5 are the fx
    4. try this maybe for 2 decks first and if it works and you need it for all 4 channels you have to look for the modifier that sets the functions deck a or c, and implement it here too as modifier
    5. means for 4 decks with all fx you would have to insert 6 times 4 the shown input
  • Isotoxin
    Isotoxin Member Posts: 207 Advisor
    edited September 2022

    My recommendation - map to use shift + fx filter knob itself to select preferred fx with a filter knob.

  • Snorki
    Snorki Member Posts: 12 Member

    it works :) thanks

  • Snorki
    Snorki Member Posts: 12 Member

    I DID it but ask how to do it by pressing the button to activate the effect to light up when active

  • Stevan
    Stevan Traktor Mapping Mod Posts: 2,042 mod
    https://community.native-instruments.com/discussion/comment/46664#Comment_46664

    You mean to activate when certain effect is selected? Like an indicator for a selected Mixer Effect?

  • Snorki
    Snorki Member Posts: 12 Member

    yessssssss :)

  • Stevan
    Stevan Traktor Mapping Mod Posts: 2,042 mod

    You could use dedicated output command. Like Uwe already said, you will need 5 pads/buttons.

    Add Out --> Mixer --> Mixer FX Selector

    Then use the controller range values to display different state in each button.

    Effect 1, min=0, max=0 (basic filter)

    Effect 2, min=1, max=1 (slot 1)

    Effect 3, min=2, max=2 (slot 2)

    Effect 4, min=3, max=3 (slot 3)

    Effect 5, min=4, max=4 (slot 4)

  • Sûlherokhh
    Sûlherokhh Member, Traktor Mapping Mod Posts: 2,811 mod
    https://community.native-instruments.com/discussion/comment/46677#Comment_46677

    And leave 'Blend' unchecked for the LED output.

  • Snorki
    Snorki Member Posts: 12 Member
    1672409936730.jpg

    I use these buttons to activate the effects but I want when I press it to light up to show that the effect is active

  • Snorki
    Snorki Member Posts: 12 Member

    anybody help me?

  • Uwe303
    Uwe303 Moderator Posts: 4,003 mod
    https://community.native-instruments.com/discussion/comment/83321#Comment_83321

    What stevan wrote did not work?

This discussion has been closed.
Back To Top

Categories